| //! Numeric traits used for internal implementations. | |
| #![doc(hidden)] | |
| #![unstable( | |
| feature = "num_internals", | |
| reason = "internal routines only exposed for testing", | |
| issue = "none" | |
| )] | |
| use crate::num::FpCategory; | |
| use crate::{f64, fmt, ops}; | |
| /// Lossy `as` casting between two types. | |
| pub trait CastInto<T: Copy>: Copy { | |
| fn cast(self) -> T; | |
| } | |
| /// Collection of traits that allow us to be generic over integer size. | |
| pub trait Int: | |
| Sized | |
| + Clone | |
| + Copy | |
| + fmt::Debug | |
| + ops::Shr<u32, Output = Self> | |
| + ops::Shl<u32, Output = Self> | |
| + ops::BitAnd<Output = Self> | |
| + ops::BitOr<Output = Self> | |
| + PartialEq | |
| + CastInto<i16> | |
| { | |
| const ZERO: Self; | |
| const ONE: Self; | |
| } | |
| macro_rules! int { | |
| ($($ty:ty),+) => { | |
| $( | |
| impl CastInto<i16> for $ty { | |
| fn cast(self) -> i16 { | |
| self as i16 | |
| } | |
| } | |
| impl Int for $ty { | |
| const ZERO: Self = 0; | |
| const ONE: Self = 1; | |
| } | |
| )+ | |
| } | |
| } | |
| int!(u16, u32, u64); | |
| /// A helper trait to avoid duplicating basically all the conversion code for IEEE floats. | |
| #[doc(hidden)] | |
| pub trait Float: | |
| Sized | |
| + ops::Div<Output = Self> | |
| + ops::Neg<Output = Self> | |
| + ops::Mul<Output = Self> | |
| + ops::Add<Output = Self> | |
| + fmt::Debug | |
| + PartialEq | |
| + PartialOrd | |
| + Default | |
| + Clone | |
| + Copy | |
| { | |
| /// The unsigned integer with the same size as the float | |
| type Int: Int + Into<u64>; | |
| /* general constants */ | |
| const INFINITY: Self; | |
| const NEG_INFINITY: Self; | |
| const NAN: Self; | |
| const NEG_NAN: Self; | |
| /// Bit width of the float | |
| const BITS: u32; | |
| /// The number of bits in the significand, *including* the hidden bit. | |
| const SIG_TOTAL_BITS: u32; | |
| const EXP_MASK: Self::Int; | |
| const SIG_MASK: Self::Int; | |
| /// The number of bits in the significand, *excluding* the hidden bit. | |
| const SIG_BITS: u32 = Self::SIG_TOTAL_BITS - 1; | |
| /// Number of bits in the exponent. | |
| const EXP_BITS: u32 = Self::BITS - Self::SIG_BITS - 1; | |
| /// The saturated (maximum bitpattern) value of the exponent, i.e. the infinite | |
| /// representation. | |
| /// | |
| /// This shifted fully right, use `EXP_MASK` for the shifted value. | |
| const EXP_SAT: u32 = (1 << Self::EXP_BITS) - 1; | |
| /// Signed version of `EXP_SAT` since we convert a lot. | |
| const INFINITE_POWER: i32 = Self::EXP_SAT as i32; | |
| /// The exponent bias value. This is also the maximum value of the exponent. | |
| const EXP_BIAS: u32 = Self::EXP_SAT >> 1; | |
| /// Minimum exponent value of normal values. | |
| const EXP_MIN: i32 = -(Self::EXP_BIAS as i32 - 1); | |
| /// Round-to-even only happens for negative values of q | |
| /// when q ≥ −4 in the 64-bit case and when q ≥ −17 in | |
| /// the 32-bit case. | |
| /// | |
| /// When q ≥ 0,we have that 5^q ≤ 2m+1. In the 64-bit case,we | |
| /// have 5^q ≤ 2m+1 ≤ 2^54 or q ≤ 23. In the 32-bit case,we have | |
| /// 5^q ≤ 2m+1 ≤ 2^25 or q ≤ 10. | |
| /// | |
| /// When q < 0, we have w ≥ (2m+1)×5^−q. We must have that w < 2^64 | |
| /// so (2m+1)×5^−q < 2^64. We have that 2m+1 > 2^53 (64-bit case) | |
| /// or 2m+1 > 2^24 (32-bit case). Hence,we must have 2^53×5^−q < 2^64 | |
| /// (64-bit) and 2^24×5^−q < 2^64 (32-bit). Hence we have 5^−q < 2^11 | |
| /// or q ≥ −4 (64-bit case) and 5^−q < 2^40 or q ≥ −17 (32-bit case). | |
| /// | |
| /// Thus we have that we only need to round ties to even when | |
| /// we have that q ∈ [−4,23](in the 64-bit case) or q∈[−17,10] | |
| /// (in the 32-bit case). In both cases,the power of five(5^|q|) | |
| /// fits in a 64-bit word. | |
| const MIN_EXPONENT_ROUND_TO_EVEN: i32; | |
| const MAX_EXPONENT_ROUND_TO_EVEN: i32; | |
| /// Largest decimal exponent for a non-infinite value. | |
| /// | |
| /// This is the max exponent in binary converted to the max exponent in decimal. Allows fast | |
| /// pathing anything larger than `10^LARGEST_POWER_OF_TEN`, which will round to infinity. | |
| const LARGEST_POWER_OF_TEN: i32 = { | |
| let largest_pow2 = Self::EXP_BIAS + 1; | |
| pow2_to_pow10(largest_pow2 as i64) as i32 | |
| }; | |
| /// Smallest decimal exponent for a non-zero value. This allows for fast pathing anything | |
| /// smaller than `10^SMALLEST_POWER_OF_TEN`, which will round to zero. | |
| /// | |
| /// The smallest power of ten is represented by `⌊log10(2^-n / (2^64 - 1))⌋`, where `n` is | |
| /// the smallest power of two. The `2^64 - 1)` denominator comes from the number of values | |
| /// that are representable by the intermediate storage format. I don't actually know _why_ | |
| /// the storage format is relevant here. | |
| /// | |
| /// The values may be calculated using the formula. Unfortunately we cannot calculate them at | |
| /// compile time since intermediates exceed the range of an `f64`. | |
| const SMALLEST_POWER_OF_TEN: i32; | |
| /// Returns the category that this number falls into. | |
| fn classify(self) -> FpCategory; | |
| /// Transmute to the integer representation | |
| fn to_bits(self) -> Self::Int; | |
| } | |
| /// Items that ideally would be on `Float`, but don't apply to all float types because they | |
| /// rely on the mantissa fitting into a `u64` (which isn't true for `f128`). | |
| #[doc(hidden)] | |
| pub trait FloatExt: Float { | |
| /// Performs a raw transmutation from an integer. | |
| fn from_u64_bits(v: u64) -> Self; | |
| /// Returns the mantissa, exponent and sign as integers. | |
| /// | |
| /// This returns `(m, p, s)` such that `s * m * 2^p` represents the original float. For 0, the | |
| /// exponent will be `-(EXP_BIAS + SIG_BITS)`, which is the minimum subnormal power. For | |
| /// infinity or NaN, the exponent will be `EXP_SAT - EXP_BIAS - SIG_BITS`. | |
| /// | |
| /// If subnormal, the mantissa will be shifted one bit to the left. Otherwise, it is returned | |
| /// with the explicit bit set but otherwise unshifted | |
| /// | |
| /// `s` is only ever +/-1. | |
| fn integer_decode(self) -> (u64, i16, i8) { | |
| let bits = self.to_bits(); | |
| let sign: i8 = if bits >> (Self::BITS - 1) == Self::Int::ZERO { 1 } else { -1 }; | |
| let mut exponent: i16 = ((bits & Self::EXP_MASK) >> Self::SIG_BITS).cast(); | |
| let mantissa = if exponent == 0 { | |
| (bits & Self::SIG_MASK) << 1 | |
| } else { | |
| (bits & Self::SIG_MASK) | (Self::Int::ONE << Self::SIG_BITS) | |
| }; | |
| // Exponent bias + mantissa shift | |
| exponent -= (Self::EXP_BIAS + Self::SIG_BITS) as i16; | |
| (mantissa.into(), exponent, sign) | |
| } | |
| } | |
| /// Solve for `b` in `10^b = 2^a` | |
| const fn pow2_to_pow10(a: i64) -> i64 { | |
| let res = (a as f64) / f64::consts::LOG2_10; | |
| res as i64 | |
| } | |
| #[cfg(target_has_reliable_f16)] | |
| impl Float for f16 { | |
| type Int = u16; | |
| const INFINITY: Self = Self::INFINITY; | |
| const NEG_INFINITY: Self = Self::NEG_INFINITY; | |
| const NAN: Self = Self::NAN; | |
| const NEG_NAN: Self = -Self::NAN; | |
| const BITS: u32 = 16; | |
| const SIG_TOTAL_BITS: u32 = Self::MANTISSA_DIGITS; | |
| const EXP_MASK: Self::Int = Self::EXP_MASK; | |
| const SIG_MASK: Self::Int = Self::MAN_MASK; | |
| const MIN_EXPONENT_ROUND_TO_EVEN: i32 = -22; | |
| const MAX_EXPONENT_ROUND_TO_EVEN: i32 = 5; | |
| const SMALLEST_POWER_OF_TEN: i32 = -27; | |
| fn to_bits(self) -> Self::Int { | |
| self.to_bits() | |
| } | |
| fn classify(self) -> FpCategory { | |
| self.classify() | |
| } | |
| } | |
| #[cfg(target_has_reliable_f16)] | |
| impl FloatExt for f16 { | |
| #[inline] | |
| fn from_u64_bits(v: u64) -> Self { | |
| Self::from_bits((v & 0xFFFF) as u16) | |
| } | |
| } | |
| impl Float for f32 { | |
| type Int = u32; | |
| const INFINITY: Self = f32::INFINITY; | |
| const NEG_INFINITY: Self = f32::NEG_INFINITY; | |
| const NAN: Self = f32::NAN; | |
| const NEG_NAN: Self = -f32::NAN; | |
| const BITS: u32 = 32; | |
| const SIG_TOTAL_BITS: u32 = Self::MANTISSA_DIGITS; | |
| const EXP_MASK: Self::Int = Self::EXP_MASK; | |
| const SIG_MASK: Self::Int = Self::MAN_MASK; | |
| const MIN_EXPONENT_ROUND_TO_EVEN: i32 = -17; | |
| const MAX_EXPONENT_ROUND_TO_EVEN: i32 = 10; | |
| const SMALLEST_POWER_OF_TEN: i32 = -65; | |
| fn to_bits(self) -> Self::Int { | |
| self.to_bits() | |
| } | |
| fn classify(self) -> FpCategory { | |
| self.classify() | |
| } | |
| } | |
| impl FloatExt for f32 { | |
| #[inline] | |
| fn from_u64_bits(v: u64) -> Self { | |
| f32::from_bits((v & 0xFFFFFFFF) as u32) | |
| } | |
| } | |
| impl Float for f64 { | |
| type Int = u64; | |
| const INFINITY: Self = Self::INFINITY; | |
| const NEG_INFINITY: Self = Self::NEG_INFINITY; | |
| const NAN: Self = Self::NAN; | |
| const NEG_NAN: Self = -Self::NAN; | |
| const BITS: u32 = 64; | |
| const SIG_TOTAL_BITS: u32 = Self::MANTISSA_DIGITS; | |
| const EXP_MASK: Self::Int = Self::EXP_MASK; | |
| const SIG_MASK: Self::Int = Self::MAN_MASK; | |
| const MIN_EXPONENT_ROUND_TO_EVEN: i32 = -4; | |
| const MAX_EXPONENT_ROUND_TO_EVEN: i32 = 23; | |
| const SMALLEST_POWER_OF_TEN: i32 = -342; | |
| fn to_bits(self) -> Self::Int { | |
| self.to_bits() | |
| } | |
| fn classify(self) -> FpCategory { | |
| self.classify() | |
| } | |
| } | |
| impl FloatExt for f64 { | |
| #[inline] | |
| fn from_u64_bits(v: u64) -> Self { | |
| f64::from_bits(v) | |
| } | |
| } |