| //! The [`OsStr`] and [`OsString`] types and associated utilities. | |
| #[cfg(test)] | |
| mod tests; | |
| use core::clone::CloneToUninit; | |
| use crate::borrow::{Borrow, Cow}; | |
| use crate::collections::TryReserveError; | |
| use crate::hash::{Hash, Hasher}; | |
| use crate::ops::{self, Range}; | |
| use crate::rc::Rc; | |
| use crate::str::FromStr; | |
| use crate::sync::Arc; | |
| use crate::sys::os_str::{Buf, Slice}; | |
| use crate::sys::{AsInner, FromInner, IntoInner}; | |
| use crate::{cmp, fmt, slice}; | |
| /// A type that can represent owned, mutable platform-native strings, but is | |
| /// cheaply inter-convertible with Rust strings. | |
| /// | |
| /// The need for this type arises from the fact that: | |
| /// | |
| /// * On Unix systems, strings are often arbitrary sequences of non-zero | |
| /// bytes, in many cases interpreted as UTF-8. | |
| /// | |
| /// * On Windows, strings are often arbitrary sequences of non-zero 16-bit | |
| /// values, interpreted as UTF-16 when it is valid to do so. | |
| /// | |
| /// * In Rust, strings are always valid UTF-8, which may contain zeros. | |
| /// | |
| /// `OsString` and [`OsStr`] bridge this gap by simultaneously representing Rust | |
| /// and platform-native string values, and in particular allowing a Rust string | |
| /// to be converted into an "OS" string with no cost if possible. A consequence | |
| /// of this is that `OsString` instances are *not* `NUL` terminated; in order | |
| /// to pass to e.g., Unix system call, you should create a [`CStr`]. | |
| /// | |
| /// `OsString` is to <code>&[OsStr]</code> as [`String`] is to <code>&[str]</code>: the former | |
| /// in each pair are owned strings; the latter are borrowed | |
| /// references. | |
| /// | |
| /// Note, `OsString` and [`OsStr`] internally do not necessarily hold strings in | |
| /// the form native to the platform; While on Unix, strings are stored as a | |
| /// sequence of 8-bit values, on Windows, where strings are 16-bit value based | |
| /// as just discussed, strings are also actually stored as a sequence of 8-bit | |
| /// values, encoded in a less-strict variant of UTF-8. This is useful to | |
| /// understand when handling capacity and length values. | |
| /// | |
| /// # Capacity of `OsString` | |
| /// | |
| /// Capacity uses units of UTF-8 bytes for OS strings which were created from valid unicode, and | |
| /// uses units of bytes in an unspecified encoding for other contents. On a given target, all | |
| /// `OsString` and `OsStr` values use the same units for capacity, so the following will work: | |
| /// ``` | |
| /// use std::ffi::{OsStr, OsString}; | |
| /// | |
| /// fn concat_os_strings(a: &OsStr, b: &OsStr) -> OsString { | |
| /// let mut ret = OsString::with_capacity(a.len() + b.len()); // This will allocate | |
| /// ret.push(a); // This will not allocate further | |
| /// ret.push(b); // This will not allocate further | |
| /// ret | |
| /// } | |
| /// ``` | |
| /// | |
| /// # Creating an `OsString` | |
| /// | |
| /// **From a Rust string**: `OsString` implements | |
| /// <code>[From]<[String]></code>, so you can use <code>my_string.[into]\()</code> to | |
| /// create an `OsString` from a normal Rust string. | |
| /// | |
| /// **From slices:** Just like you can start with an empty Rust | |
| /// [`String`] and then [`String::push_str`] some <code>&[str]</code> | |
| /// sub-string slices into it, you can create an empty `OsString` with | |
| /// the [`OsString::new`] method and then push string slices into it with the | |
| /// [`OsString::push`] method. | |
| /// | |
| /// # Extracting a borrowed reference to the whole OS string | |
| /// | |
| /// You can use the [`OsString::as_os_str`] method to get an <code>&[OsStr]</code> from | |
| /// an `OsString`; this is effectively a borrowed reference to the | |
| /// whole string. | |
| /// | |
| /// # Conversions | |
| /// | |
| /// See the [module's toplevel documentation about conversions][conversions] for a discussion on | |
| /// the traits which `OsString` implements for [conversions] from/to native representations. | |
| /// | |
| /// [`CStr`]: crate::ffi::CStr | |
| /// [conversions]: super#conversions | |
| /// [into]: Into::into | |
| #[cfg_attr(not(test), rustc_diagnostic_item = "OsString")] | |
| #[stable(feature = "rust1", since = "1.0.0")] | |
| pub struct OsString { | |
| inner: Buf, | |
| } | |
| /// Allows extension traits within `std`. | |
| #[unstable(feature = "sealed", issue = "none")] | |
| impl crate::sealed::Sealed for OsString {} | |
| /// Borrowed reference to an OS string (see [`OsString`]). | |
| /// | |
| /// This type represents a borrowed reference to a string in the operating system's preferred | |
| /// representation. | |
| /// | |
| /// `&OsStr` is to [`OsString`] as <code>&[str]</code> is to [`String`]: the | |
| /// former in each pair are borrowed references; the latter are owned strings. | |
| /// | |
| /// See the [module's toplevel documentation about conversions][conversions] for a discussion on | |
| /// the traits which `OsStr` implements for [conversions] from/to native representations. | |
| /// | |
| /// [conversions]: super#conversions | |
| #[cfg_attr(not(test), rustc_diagnostic_item = "OsStr")] | |
| #[stable(feature = "rust1", since = "1.0.0")] | |
| // `OsStr::from_inner` and `impl CloneToUninit for OsStr` current implementation relies | |
| // on `OsStr` being layout-compatible with `Slice`. | |
| // However, `OsStr` layout is considered an implementation detail and must not be relied upon. | |
| #[repr(transparent)] | |
| pub struct OsStr { | |
| inner: Slice, | |
| } | |
| /// Allows extension traits within `std`. | |
| #[unstable(feature = "sealed", issue = "none")] | |
| impl crate::sealed::Sealed for OsStr {} | |
| impl OsString { | |
| /// Constructs a new empty `OsString`. | |
| /// | |
| /// # Examples | |
| /// | |
| /// ``` | |
| /// use std::ffi::OsString; | |
| /// | |
| /// let os_string = OsString::new(); | |
| /// ``` | |
| #[stable(feature = "rust1", since = "1.0.0")] | |
| #[must_use] | |
| #[inline] | |
| #[rustc_const_stable(feature = "const_pathbuf_osstring_new", since = "1.91.0")] | |
| pub const fn new() -> OsString { | |
| OsString { inner: Buf::from_string(String::new()) } | |
| } | |
| /// Converts bytes to an `OsString` without checking that the bytes contains | |
| /// valid [`OsStr`]-encoded data. | |
| /// | |
| /// The byte encoding is an unspecified, platform-specific, self-synchronizing superset of UTF-8. | |
| /// By being a self-synchronizing superset of UTF-8, this encoding is also a superset of 7-bit | |
| /// ASCII. | |
| /// | |
| /// See the [module's toplevel documentation about conversions][conversions] for safe, | |
| /// cross-platform [conversions] from/to native representations. | |
| /// | |
| /// # Safety | |
| /// | |
| /// As the encoding is unspecified, callers must pass in bytes that originated as a mixture of | |
| /// validated UTF-8 and bytes from [`OsStr::as_encoded_bytes`] from within the same Rust version | |
| /// built for the same target platform. For example, reconstructing an `OsString` from bytes sent | |
| /// over the network or stored in a file will likely violate these safety rules. | |
| /// | |
| /// Due to the encoding being self-synchronizing, the bytes from [`OsStr::as_encoded_bytes`] can be | |
| /// split either immediately before or immediately after any valid non-empty UTF-8 substring. | |
| /// | |
| /// # Example | |
| /// | |
| /// ``` | |
| /// use std::ffi::OsStr; | |
| /// | |
| /// let os_str = OsStr::new("Mary had a little lamb"); | |
| /// let bytes = os_str.as_encoded_bytes(); | |
| /// let words = bytes.split(|b| *b == b' '); | |
| /// let words: Vec<&OsStr> = words.map(|word| { | |
| /// // SAFETY: | |
| /// // - Each `word` only contains content that originated from `OsStr::as_encoded_bytes` | |
| /// // - Only split with ASCII whitespace which is a non-empty UTF-8 substring | |
| /// unsafe { OsStr::from_encoded_bytes_unchecked(word) } | |
| /// }).collect(); | |
| /// ``` | |
| /// | |
| /// [conversions]: super#conversions | |
| #[inline] | |
| #[stable(feature = "os_str_bytes", since = "1.74.0")] | |
| pub unsafe fn from_encoded_bytes_unchecked(bytes: Vec<u8>) -> Self { | |
| OsString { inner: unsafe { Buf::from_encoded_bytes_unchecked(bytes) } } | |
| } | |
| /// Converts to an [`OsStr`] slice. | |
| /// | |
| /// # Examples | |
| /// | |
| /// ``` | |
| /// use std::ffi::{OsString, OsStr}; | |
| /// | |
| /// let os_string = OsString::from("foo"); | |
| /// let os_str = OsStr::new("foo"); | |
| /// assert_eq!(os_string.as_os_str(), os_str); | |
| /// ``` | |
| #[cfg_attr(not(test), rustc_diagnostic_item = "os_string_as_os_str")] | |
| #[stable(feature = "rust1", since = "1.0.0")] | |
| #[must_use] | |
| #[inline] | |
| pub fn as_os_str(&self) -> &OsStr { | |
| self | |
| } | |
| /// Converts the `OsString` into a byte vector. To convert the byte vector back into an | |
| /// `OsString`, use the [`OsString::from_encoded_bytes_unchecked`] function. | |
| /// | |
| /// The byte encoding is an unspecified, platform-specific, self-synchronizing superset of UTF-8. | |
| /// By being a self-synchronizing superset of UTF-8, this encoding is also a superset of 7-bit | |
| /// ASCII. | |
| /// | |
| /// Note: As the encoding is unspecified, any sub-slice of bytes that is not valid UTF-8 should | |
| /// be treated as opaque and only comparable within the same Rust version built for the same | |
| /// target platform. For example, sending the bytes over the network or storing it in a file | |
| /// will likely result in incompatible data. See [`OsString`] for more encoding details | |
| /// and [`std::ffi`] for platform-specific, specified conversions. | |
| /// | |
| /// [`std::ffi`]: crate::ffi | |
| #[inline] | |
| #[stable(feature = "os_str_bytes", since = "1.74.0")] | |
| pub fn into_encoded_bytes(self) -> Vec<u8> { | |
| self.inner.into_encoded_bytes() | |
| } | |
| /// Converts the `OsString` into a [`String`] if it contains valid Unicode data. | |
| /// | |
| /// On failure, ownership of the original `OsString` is returned. | |
| /// | |
| /// # Examples | |
| /// | |
| /// ``` | |
| /// use std::ffi::OsString; | |
| /// | |
| /// let os_string = OsString::from("foo"); | |
| /// let string = os_string.into_string(); | |
| /// assert_eq!(string, Ok(String::from("foo"))); | |
| /// ``` | |
| #[stable(feature = "rust1", since = "1.0.0")] | |
| #[inline] | |
| pub fn into_string(self) -> Result<String, OsString> { | |
| self.inner.into_string().map_err(|buf| OsString { inner: buf }) | |
| } | |
| /// Extends the string with the given <code>&[OsStr]</code> slice. | |
| /// | |
| /// # Examples | |
| /// | |
| /// ``` | |
| /// use std::ffi::OsString; | |
| /// | |
| /// let mut os_string = OsString::from("foo"); | |
| /// os_string.push("bar"); | |
| /// assert_eq!(&os_string, "foobar"); | |
| /// ``` | |
| #[stable(feature = "rust1", since = "1.0.0")] | |
| #[inline] | |
| #[rustc_confusables("append", "put")] | |
| pub fn push<T: AsRef<OsStr>>(&mut self, s: T) { | |
| trait SpecPushTo { | |
| fn spec_push_to(&self, buf: &mut OsString); | |
| } | |
| impl<T: AsRef<OsStr>> SpecPushTo for T { | |
| #[inline] | |
| default fn spec_push_to(&self, buf: &mut OsString) { | |
| buf.inner.push_slice(&self.as_ref().inner); | |
| } | |
| } | |
| // Use a more efficient implementation when the string is UTF-8. | |
| macro spec_str($T:ty) { | |
| impl SpecPushTo for $T { | |
| #[inline] | |
| fn spec_push_to(&self, buf: &mut OsString) { | |
| buf.inner.push_str(self); | |
| } | |
| } | |
| } | |
| spec_str!(str); | |
| spec_str!(String); | |
| s.spec_push_to(self) | |
| } | |
| /// Creates a new `OsString` with at least the given capacity. | |
| /// | |
| /// The string will be able to hold at least `capacity` length units of other | |
| /// OS strings without reallocating. This method is allowed to allocate for | |
| /// more units than `capacity`. If `capacity` is 0, the string will not | |
| /// allocate. | |
| /// | |
| /// See the main `OsString` documentation information about encoding and capacity units. | |
| /// | |
| /// # Examples | |
| /// | |
| /// ``` | |
| /// use std::ffi::OsString; | |
| /// | |
| /// let mut os_string = OsString::with_capacity(10); | |
| /// let capacity = os_string.capacity(); | |
| /// | |
| /// // This push is done without reallocating | |
| /// os_string.push("foo"); | |
| /// | |
| /// assert_eq!(capacity, os_string.capacity()); | |
| /// ``` | |
| #[stable(feature = "osstring_simple_functions", since = "1.9.0")] | |
| #[must_use] | |
| #[inline] | |
| pub fn with_capacity(capacity: usize) -> OsString { | |
| OsString { inner: Buf::with_capacity(capacity) } | |
| } | |
| /// Truncates the `OsString` to zero length. | |
| /// | |
| /// # Examples | |
| /// | |
| /// ``` | |
| /// use std::ffi::OsString; | |
| /// | |
| /// let mut os_string = OsString::from("foo"); | |
| /// assert_eq!(&os_string, "foo"); | |
| /// | |
| /// os_string.clear(); | |
| /// assert_eq!(&os_string, ""); | |
| /// ``` | |
| #[stable(feature = "osstring_simple_functions", since = "1.9.0")] | |
| #[inline] | |
| pub fn clear(&mut self) { | |
| self.inner.clear() | |
| } | |
| /// Returns the capacity this `OsString` can hold without reallocating. | |
| /// | |
| /// See the main `OsString` documentation information about encoding and capacity units. | |
| /// | |
| /// # Examples | |
| /// | |
| /// ``` | |
| /// use std::ffi::OsString; | |
| /// | |
| /// let os_string = OsString::with_capacity(10); | |
| /// assert!(os_string.capacity() >= 10); | |
| /// ``` | |
| #[stable(feature = "osstring_simple_functions", since = "1.9.0")] | |
| #[must_use] | |
| #[inline] | |
| pub fn capacity(&self) -> usize { | |
| self.inner.capacity() | |
| } | |
| /// Reserves capacity for at least `additional` more capacity to be inserted | |
| /// in the given `OsString`. Does nothing if the capacity is | |
| /// already sufficient. | |
| /// | |
| /// The collection may reserve more space to speculatively avoid frequent reallocations. | |
| /// | |
| /// See the main `OsString` documentation information about encoding and capacity units. | |
| /// | |
| /// # Examples | |
| /// | |
| /// ``` | |
| /// use std::ffi::OsString; | |
| /// | |
| /// let mut s = OsString::new(); | |
| /// s.reserve(10); | |
| /// assert!(s.capacity() >= 10); | |
| /// ``` | |
| #[stable(feature = "osstring_simple_functions", since = "1.9.0")] | |
| #[inline] | |
| pub fn reserve(&mut self, additional: usize) { | |
| self.inner.reserve(additional) | |
| } | |
| /// Tries to reserve capacity for at least `additional` more length units | |
| /// in the given `OsString`. The string may reserve more space to speculatively avoid | |
| /// frequent reallocations. After calling `try_reserve`, capacity will be | |
| /// greater than or equal to `self.len() + additional` if it returns `Ok(())`. | |
| /// Does nothing if capacity is already sufficient. This method preserves | |
| /// the contents even if an error occurs. | |
| /// | |
| /// See the main `OsString` documentation information about encoding and capacity units. | |
| /// | |
| /// # Errors | |
| /// | |
| /// If the capacity overflows, or the allocator reports a failure, then an error | |
| /// is returned. | |
| /// | |
| /// # Examples | |
| /// | |
| /// ``` | |
| /// use std::ffi::{OsStr, OsString}; | |
| /// use std::collections::TryReserveError; | |
| /// | |
| /// fn process_data(data: &str) -> Result<OsString, TryReserveError> { | |
| /// let mut s = OsString::new(); | |
| /// | |
| /// // Pre-reserve the memory, exiting if we can't | |
| /// s.try_reserve(OsStr::new(data).len())?; | |
| /// | |
| /// // Now we know this can't OOM in the middle of our complex work | |
| /// s.push(data); | |
| /// | |
| /// Ok(s) | |
| /// } | |
| /// # process_data("123").expect("why is the test harness OOMing on 3 bytes?"); | |
| /// ``` | |
| #[stable(feature = "try_reserve_2", since = "1.63.0")] | |
| #[inline] | |
| pub fn try_reserve(&mut self, additional: usize) -> Result<(), TryReserveError> { | |
| self.inner.try_reserve(additional) | |
| } | |
| /// Reserves the minimum capacity for at least `additional` more capacity to | |
| /// be inserted in the given `OsString`. Does nothing if the capacity is | |
| /// already sufficient. | |
| /// | |
| /// Note that the allocator may give the collection more space than it | |
| /// requests. Therefore, capacity can not be relied upon to be precisely | |
| /// minimal. Prefer [`reserve`] if future insertions are expected. | |
| /// | |
| /// [`reserve`]: OsString::reserve | |
| /// | |
| /// See the main `OsString` documentation information about encoding and capacity units. | |
| /// | |
| /// # Examples | |
| /// | |
| /// ``` | |
| /// use std::ffi::OsString; | |
| /// | |
| /// let mut s = OsString::new(); | |
| /// s.reserve_exact(10); | |
| /// assert!(s.capacity() >= 10); | |
| /// ``` | |
| #[stable(feature = "osstring_simple_functions", since = "1.9.0")] | |
| #[inline] | |
| pub fn reserve_exact(&mut self, additional: usize) { | |
| self.inner.reserve_exact(additional) | |
| } | |
| /// Tries to reserve the minimum capacity for at least `additional` | |
| /// more length units in the given `OsString`. After calling | |
| /// `try_reserve_exact`, capacity will be greater than or equal to | |
| /// `self.len() + additional` if it returns `Ok(())`. | |
| /// Does nothing if the capacity is already sufficient. | |
| /// | |
| /// Note that the allocator may give the `OsString` more space than it | |
| /// requests. Therefore, capacity can not be relied upon to be precisely | |
| /// minimal. Prefer [`try_reserve`] if future insertions are expected. | |
| /// | |
| /// [`try_reserve`]: OsString::try_reserve | |
| /// | |
| /// See the main `OsString` documentation information about encoding and capacity units. | |
| /// | |
| /// # Errors | |
| /// | |
| /// If the capacity overflows, or the allocator reports a failure, then an error | |
| /// is returned. | |
| /// | |
| /// # Examples | |
| /// | |
| /// ``` | |
| /// use std::ffi::{OsStr, OsString}; | |
| /// use std::collections::TryReserveError; | |
| /// | |
| /// fn process_data(data: &str) -> Result<OsString, TryReserveError> { | |
| /// let mut s = OsString::new(); | |
| /// | |
| /// // Pre-reserve the memory, exiting if we can't | |
| /// s.try_reserve_exact(OsStr::new(data).len())?; | |
| /// | |
| /// // Now we know this can't OOM in the middle of our complex work | |
| /// s.push(data); | |
| /// | |
| /// Ok(s) | |
| /// } | |
| /// # process_data("123").expect("why is the test harness OOMing on 3 bytes?"); | |
| /// ``` | |
| #[stable(feature = "try_reserve_2", since = "1.63.0")] | |
| #[inline] | |
| pub fn try_reserve_exact(&mut self, additional: usize) -> Result<(), TryReserveError> { | |
| self.inner.try_reserve_exact(additional) | |
| } | |
| /// Shrinks the capacity of the `OsString` to match its length. | |
| /// | |
| /// See the main `OsString` documentation information about encoding and capacity units. | |
| /// | |
| /// # Examples | |
| /// | |
| /// ``` | |
| /// use std::ffi::OsString; | |
| /// | |
| /// let mut s = OsString::from("foo"); | |
| /// | |
| /// s.reserve(100); | |
| /// assert!(s.capacity() >= 100); | |
| /// | |
| /// s.shrink_to_fit(); | |
| /// assert_eq!(3, s.capacity()); | |
| /// ``` | |
| #[stable(feature = "osstring_shrink_to_fit", since = "1.19.0")] | |
| #[inline] | |
| pub fn shrink_to_fit(&mut self) { | |
| self.inner.shrink_to_fit() | |
| } | |
| /// Shrinks the capacity of the `OsString` with a lower bound. | |
| /// | |
| /// The capacity will remain at least as large as both the length | |
| /// and the supplied value. | |
| /// | |
| /// If the current capacity is less than the lower limit, this is a no-op. | |
| /// | |
| /// See the main `OsString` documentation information about encoding and capacity units. | |
| /// | |
| /// # Examples | |
| /// | |
| /// ``` | |
| /// use std::ffi::OsString; | |
| /// | |
| /// let mut s = OsString::from("foo"); | |
| /// | |
| /// s.reserve(100); | |
| /// assert!(s.capacity() >= 100); | |
| /// | |
| /// s.shrink_to(10); | |
| /// assert!(s.capacity() >= 10); | |
| /// s.shrink_to(0); | |
| /// assert!(s.capacity() >= 3); | |
| /// ``` | |
| #[inline] | |
| #[stable(feature = "shrink_to", since = "1.56.0")] | |
| pub fn shrink_to(&mut self, min_capacity: usize) { | |
| self.inner.shrink_to(min_capacity) | |
| } | |
| /// Converts this `OsString` into a boxed [`OsStr`]. | |
| /// | |
| /// # Examples | |
| /// | |
| /// ``` | |
| /// use std::ffi::{OsString, OsStr}; | |
| /// | |
| /// let s = OsString::from("hello"); | |
| /// | |
| /// let b: Box<OsStr> = s.into_boxed_os_str(); | |
| /// ``` | |
| #[must_use = "`self` will be dropped if the result is not used"] | |
| #[stable(feature = "into_boxed_os_str", since = "1.20.0")] | |
| pub fn into_boxed_os_str(self) -> Box<OsStr> { | |
| let rw = Box::into_raw(self.inner.into_box()) as *mut OsStr; | |
| unsafe { Box::from_raw(rw) } | |
| } | |
| /// Consumes and leaks the `OsString`, returning a mutable reference to the contents, | |
| /// `&'a mut OsStr`. | |
| /// | |
| /// The caller has free choice over the returned lifetime, including 'static. | |
| /// Indeed, this function is ideally used for data that lives for the remainder of | |
| /// the program’s life, as dropping the returned reference will cause a memory leak. | |
| /// | |
| /// It does not reallocate or shrink the `OsString`, so the leaked allocation may include | |
| /// unused capacity that is not part of the returned slice. If you want to discard excess | |
| /// capacity, call [`into_boxed_os_str`], and then [`Box::leak`] instead. | |
| /// However, keep in mind that trimming the capacity may result in a reallocation and copy. | |
| /// | |
| /// [`into_boxed_os_str`]: Self::into_boxed_os_str | |
| #[stable(feature = "os_string_pathbuf_leak", since = "1.89.0")] | |
| #[inline] | |
| pub fn leak<'a>(self) -> &'a mut OsStr { | |
| OsStr::from_inner_mut(self.inner.leak()) | |
| } | |
| /// Truncate the `OsString` to the specified length. | |
| /// | |
| /// If `new_len` is greater than the string's current length, this has no | |
| /// effect. | |
| /// | |
| /// # Panics | |
| /// | |
| /// Panics if `len` does not lie on a valid `OsStr` boundary | |
| /// (as described in [`OsStr::slice_encoded_bytes`]). | |
| #[inline] | |
| #[unstable(feature = "os_string_truncate", issue = "133262")] | |
| pub fn truncate(&mut self, len: usize) { | |
| if len <= self.len() { | |
| self.as_os_str().inner.check_public_boundary(len); | |
| // SAFETY: The length was just checked to be at a valid boundary. | |
| unsafe { self.inner.truncate_unchecked(len) }; | |
| } | |
| } | |
| /// Provides plumbing to `Vec::extend_from_slice` without giving full | |
| /// mutable access to the `Vec`. | |
| /// | |
| /// # Safety | |
| /// | |
| /// The slice must be valid for the platform encoding (as described in | |
| /// [`OsStr::from_encoded_bytes_unchecked`]). | |
| /// | |
| /// This bypasses the encoding-dependent surrogate joining, so either | |
| /// `self` must not end with a leading surrogate half, or `other` must not | |
| /// start with a trailing surrogate half. | |
| #[inline] | |
| pub(crate) unsafe fn extend_from_slice_unchecked(&mut self, other: &[u8]) { | |
| // SAFETY: Guaranteed by caller. | |
| unsafe { self.inner.extend_from_slice_unchecked(other) }; | |
| } | |
| } | |
| #[stable(feature = "rust1", since = "1.0.0")] | |
| impl From<String> for OsString { | |
| /// Converts a [`String`] into an [`OsString`]. | |
| /// | |
| /// This conversion does not allocate or copy memory. | |
| #[inline] | |
| fn from(s: String) -> OsString { | |
| OsString { inner: Buf::from_string(s) } | |
| } | |
| } | |
| #[stable(feature = "rust1", since = "1.0.0")] | |
| impl<T: ?Sized + AsRef<OsStr>> From<&T> for OsString { | |
| /// Copies any value implementing <code>[AsRef]<[OsStr]></code> | |
| /// into a newly allocated [`OsString`]. | |
| fn from(s: &T) -> OsString { | |
| trait SpecToOsString { | |
| fn spec_to_os_string(&self) -> OsString; | |
| } | |
| impl<T: AsRef<OsStr>> SpecToOsString for T { | |
| #[inline] | |
| default fn spec_to_os_string(&self) -> OsString { | |
| self.as_ref().to_os_string() | |
| } | |
| } | |
| // Preserve the known-UTF-8 property for strings. | |
| macro spec_str($T:ty) { | |
| impl SpecToOsString for $T { | |
| #[inline] | |
| fn spec_to_os_string(&self) -> OsString { | |
| OsString::from(String::from(self)) | |
| } | |
| } | |
| } | |
| spec_str!(str); | |
| spec_str!(String); | |
| s.spec_to_os_string() | |
| } | |
| } | |
| #[stable(feature = "rust1", since = "1.0.0")] | |
| impl ops::Index<ops::RangeFull> for OsString { | |
| type Output = OsStr; | |
| #[inline] | |
| fn index(&self, _index: ops::RangeFull) -> &OsStr { | |
| OsStr::from_inner(self.inner.as_slice()) | |
| } | |
| } | |
| #[stable(feature = "mut_osstr", since = "1.44.0")] | |
| impl ops::IndexMut<ops::RangeFull> for OsString { | |
| #[inline] | |
| fn index_mut(&mut self, _index: ops::RangeFull) -> &mut OsStr { | |
| OsStr::from_inner_mut(self.inner.as_mut_slice()) | |
| } | |
| } | |
| #[stable(feature = "rust1", since = "1.0.0")] | |
| impl ops::Deref for OsString { | |
| type Target = OsStr; | |
| #[inline] | |
| fn deref(&self) -> &OsStr { | |
| &self[..] | |
| } | |
| } | |
| #[stable(feature = "mut_osstr", since = "1.44.0")] | |
| impl ops::DerefMut for OsString { | |
| #[inline] | |
| fn deref_mut(&mut self) -> &mut OsStr { | |
| &mut self[..] | |
| } | |
| } | |
| #[stable(feature = "osstring_default", since = "1.9.0")] | |
| impl Default for OsString { | |
| /// Constructs an empty `OsString`. | |
| #[inline] | |
| fn default() -> OsString { | |
| OsString::new() | |
| } | |
| } | |
| #[stable(feature = "rust1", since = "1.0.0")] | |
| impl Clone for OsString { | |
| #[inline] | |
| fn clone(&self) -> Self { | |
| OsString { inner: self.inner.clone() } | |
| } | |
| /// Clones the contents of `source` into `self`. | |
| /// | |
| /// This method is preferred over simply assigning `source.clone()` to `self`, | |
| /// as it avoids reallocation if possible. | |
| #[inline] | |
| fn clone_from(&mut self, source: &Self) { | |
| self.inner.clone_from(&source.inner) | |
| } | |
| } | |
| #[stable(feature = "rust1", since = "1.0.0")] | |
| impl fmt::Debug for OsString { | |
| fn fmt(&self, formatter: &mut fmt::Formatter<'_>) -> fmt::Result { | |
| fmt::Debug::fmt(&**self, formatter) | |
| } | |
| } | |
| #[stable(feature = "rust1", since = "1.0.0")] | |
| impl PartialEq for OsString { | |
| #[inline] | |
| fn eq(&self, other: &OsString) -> bool { | |
| &**self == &**other | |
| } | |
| } | |
| #[stable(feature = "rust1", since = "1.0.0")] | |
| impl PartialEq<str> for OsString { | |
| #[inline] | |
| fn eq(&self, other: &str) -> bool { | |
| &**self == other | |
| } | |
| } | |
| #[stable(feature = "rust1", since = "1.0.0")] | |
| impl PartialEq<OsString> for str { | |
| #[inline] | |
| fn eq(&self, other: &OsString) -> bool { | |
| &**other == self | |
| } | |
| } | |
| #[stable(feature = "os_str_str_ref_eq", since = "1.29.0")] | |
| impl PartialEq<&str> for OsString { | |
| #[inline] | |
| fn eq(&self, other: &&str) -> bool { | |
| **self == **other | |
| } | |
| } | |
| #[stable(feature = "os_str_str_ref_eq", since = "1.29.0")] | |
| impl<'a> PartialEq<OsString> for &'a str { | |
| #[inline] | |
| fn eq(&self, other: &OsString) -> bool { | |
| **other == **self | |
| } | |
| } | |
| #[stable(feature = "rust1", since = "1.0.0")] | |
| impl Eq for OsString {} | |
| #[stable(feature = "rust1", since = "1.0.0")] | |
| impl PartialOrd for OsString { | |
| #[inline] | |
| fn partial_cmp(&self, other: &OsString) -> Option<cmp::Ordering> { | |
| (&**self).partial_cmp(&**other) | |
| } | |
| #[inline] | |
| fn lt(&self, other: &OsString) -> bool { | |
| &**self < &**other | |
| } | |
| #[inline] | |
| fn le(&self, other: &OsString) -> bool { | |
| &**self <= &**other | |
| } | |
| #[inline] | |
| fn gt(&self, other: &OsString) -> bool { | |
| &**self > &**other | |
| } | |
| #[inline] | |
| fn ge(&self, other: &OsString) -> bool { | |
| &**self >= &**other | |
| } | |
| } | |
| #[stable(feature = "rust1", since = "1.0.0")] | |
| impl PartialOrd<str> for OsString { | |
| #[inline] | |
| fn partial_cmp(&self, other: &str) -> Option<cmp::Ordering> { | |
| (&**self).partial_cmp(other) | |
| } | |
| } | |
| #[stable(feature = "rust1", since = "1.0.0")] | |
| impl Ord for OsString { | |
| #[inline] | |
| fn cmp(&self, other: &OsString) -> cmp::Ordering { | |
| (&**self).cmp(&**other) | |
| } | |
| } | |
| #[stable(feature = "rust1", since = "1.0.0")] | |
| impl Hash for OsString { | |
| #[inline] | |
| fn hash<H: Hasher>(&self, state: &mut H) { | |
| (&**self).hash(state) | |
| } | |
| } | |
| #[stable(feature = "os_string_fmt_write", since = "1.64.0")] | |
| impl fmt::Write for OsString { | |
| fn write_str(&mut self, s: &str) -> fmt::Result { | |
| self.push(s); | |
| Ok(()) | |
| } | |
| } | |
| impl OsStr { | |
| /// Coerces into an `OsStr` slice. | |
| /// | |
| /// # Examples | |
| /// | |
| /// ``` | |
| /// use std::ffi::OsStr; | |
| /// | |
| /// let os_str = OsStr::new("foo"); | |
| /// ``` | |
| #[inline] | |
| #[stable(feature = "rust1", since = "1.0.0")] | |
| #[rustc_const_unstable(feature = "const_convert", issue = "143773")] | |
| pub const fn new<S: [const] AsRef<OsStr> + ?Sized>(s: &S) -> &OsStr { | |
| s.as_ref() | |
| } | |
| /// Converts a slice of bytes to an OS string slice without checking that the string contains | |
| /// valid `OsStr`-encoded data. | |
| /// | |
| /// The byte encoding is an unspecified, platform-specific, self-synchronizing superset of UTF-8. | |
| /// By being a self-synchronizing superset of UTF-8, this encoding is also a superset of 7-bit | |
| /// ASCII. | |
| /// | |
| /// See the [module's toplevel documentation about conversions][conversions] for safe, | |
| /// cross-platform [conversions] from/to native representations. | |
| /// | |
| /// # Safety | |
| /// | |
| /// As the encoding is unspecified, callers must pass in bytes that originated as a mixture of | |
| /// validated UTF-8 and bytes from [`OsStr::as_encoded_bytes`] from within the same Rust version | |
| /// built for the same target platform. For example, reconstructing an `OsStr` from bytes sent | |
| /// over the network or stored in a file will likely violate these safety rules. | |
| /// | |
| /// Due to the encoding being self-synchronizing, the bytes from [`OsStr::as_encoded_bytes`] can be | |
| /// split either immediately before or immediately after any valid non-empty UTF-8 substring. | |
| /// | |
| /// # Example | |
| /// | |
| /// ``` | |
| /// use std::ffi::OsStr; | |
| /// | |
| /// let os_str = OsStr::new("Mary had a little lamb"); | |
| /// let bytes = os_str.as_encoded_bytes(); | |
| /// let words = bytes.split(|b| *b == b' '); | |
| /// let words: Vec<&OsStr> = words.map(|word| { | |
| /// // SAFETY: | |
| /// // - Each `word` only contains content that originated from `OsStr::as_encoded_bytes` | |
| /// // - Only split with ASCII whitespace which is a non-empty UTF-8 substring | |
| /// unsafe { OsStr::from_encoded_bytes_unchecked(word) } | |
| /// }).collect(); | |
| /// ``` | |
| /// | |
| /// [conversions]: super#conversions | |
| #[inline] | |
| #[stable(feature = "os_str_bytes", since = "1.74.0")] | |
| pub unsafe fn from_encoded_bytes_unchecked(bytes: &[u8]) -> &Self { | |
| Self::from_inner(unsafe { Slice::from_encoded_bytes_unchecked(bytes) }) | |
| } | |
| #[inline] | |
| #[rustc_const_unstable(feature = "const_convert", issue = "143773")] | |
| const fn from_inner(inner: &Slice) -> &OsStr { | |
| // SAFETY: OsStr is just a wrapper of Slice, | |
| // therefore converting &Slice to &OsStr is safe. | |
| unsafe { &*(inner as *const Slice as *const OsStr) } | |
| } | |
| #[inline] | |
| #[rustc_const_unstable(feature = "const_convert", issue = "143773")] | |
| const fn from_inner_mut(inner: &mut Slice) -> &mut OsStr { | |
| // SAFETY: OsStr is just a wrapper of Slice, | |
| // therefore converting &mut Slice to &mut OsStr is safe. | |
| // Any method that mutates OsStr must be careful not to | |
| // break platform-specific encoding, in particular Wtf8 on Windows. | |
| unsafe { &mut *(inner as *mut Slice as *mut OsStr) } | |
| } | |
| /// Yields a <code>&[str]</code> slice if the `OsStr` is valid Unicode. | |
| /// | |
| /// This conversion may entail doing a check for UTF-8 validity. | |
| /// | |
| /// # Examples | |
| /// | |
| /// ``` | |
| /// use std::ffi::OsStr; | |
| /// | |
| /// let os_str = OsStr::new("foo"); | |
| /// assert_eq!(os_str.to_str(), Some("foo")); | |
| /// ``` | |
| #[stable(feature = "rust1", since = "1.0.0")] | |
| #[must_use = "this returns the result of the operation, \ | |
| without modifying the original"] | |
| #[inline] | |
| pub fn to_str(&self) -> Option<&str> { | |
| self.inner.to_str().ok() | |
| } | |
| /// Converts an `OsStr` to a <code>[Cow]<[str]></code>. | |
| /// | |
| /// Any non-UTF-8 sequences are replaced with | |
| /// [`U+FFFD REPLACEMENT CHARACTER`][U+FFFD]. | |
| /// | |
| /// [U+FFFD]: crate::char::REPLACEMENT_CHARACTER | |
| /// | |
| /// # Examples | |
| /// | |
| /// Calling `to_string_lossy` on an `OsStr` with invalid unicode: | |
| /// | |
| /// ``` | |
| /// // Note, due to differences in how Unix and Windows represent strings, | |
| /// // we are forced to complicate this example, setting up example `OsStr`s | |
| /// // with different source data and via different platform extensions. | |
| /// // Understand that in reality you could end up with such example invalid | |
| /// // sequences simply through collecting user command line arguments, for | |
| /// // example. | |
| /// | |
| /// #[cfg(unix)] { | |
| /// use std::ffi::OsStr; | |
| /// use std::os::unix::ffi::OsStrExt; | |
| /// | |
| /// // Here, the values 0x66 and 0x6f correspond to 'f' and 'o' | |
| /// // respectively. The value 0x80 is a lone continuation byte, invalid | |
| /// // in a UTF-8 sequence. | |
| /// let source = [0x66, 0x6f, 0x80, 0x6f]; | |
| /// let os_str = OsStr::from_bytes(&source[..]); | |
| /// | |
| /// assert_eq!(os_str.to_string_lossy(), "fo�o"); | |
| /// } | |
| /// #[cfg(windows)] { | |
| /// use std::ffi::OsString; | |
| /// use std::os::windows::prelude::*; | |
| /// | |
| /// // Here the values 0x0066 and 0x006f correspond to 'f' and 'o' | |
| /// // respectively. The value 0xD800 is a lone surrogate half, invalid | |
| /// // in a UTF-16 sequence. | |
| /// let source = [0x0066, 0x006f, 0xD800, 0x006f]; | |
| /// let os_string = OsString::from_wide(&source[..]); | |
| /// let os_str = os_string.as_os_str(); | |
| /// | |
| /// assert_eq!(os_str.to_string_lossy(), "fo�o"); | |
| /// } | |
| /// ``` | |
| #[stable(feature = "rust1", since = "1.0.0")] | |
| #[must_use = "this returns the result of the operation, \ | |
| without modifying the original"] | |
| #[inline] | |
| pub fn to_string_lossy(&self) -> Cow<'_, str> { | |
| self.inner.to_string_lossy() | |
| } | |
| /// Copies the slice into an owned [`OsString`]. | |
| /// | |
| /// # Examples | |
| /// | |
| /// ``` | |
| /// use std::ffi::{OsStr, OsString}; | |
| /// | |
| /// let os_str = OsStr::new("foo"); | |
| /// let os_string = os_str.to_os_string(); | |
| /// assert_eq!(os_string, OsString::from("foo")); | |
| /// ``` | |
| #[stable(feature = "rust1", since = "1.0.0")] | |
| #[must_use = "this returns the result of the operation, \ | |
| without modifying the original"] | |
| #[inline] | |
| #[cfg_attr(not(test), rustc_diagnostic_item = "os_str_to_os_string")] | |
| pub fn to_os_string(&self) -> OsString { | |
| OsString { inner: self.inner.to_owned() } | |
| } | |
| /// Checks whether the `OsStr` is empty. | |
| /// | |
| /// # Examples | |
| /// | |
| /// ``` | |
| /// use std::ffi::OsStr; | |
| /// | |
| /// let os_str = OsStr::new(""); | |
| /// assert!(os_str.is_empty()); | |
| /// | |
| /// let os_str = OsStr::new("foo"); | |
| /// assert!(!os_str.is_empty()); | |
| /// ``` | |
| #[stable(feature = "osstring_simple_functions", since = "1.9.0")] | |
| #[must_use] | |
| #[inline] | |
| pub fn is_empty(&self) -> bool { | |
| self.inner.inner.is_empty() | |
| } | |
| /// Returns the length of this `OsStr`. | |
| /// | |
| /// Note that this does **not** return the number of bytes in the string in | |
| /// OS string form. | |
| /// | |
| /// The length returned is that of the underlying storage used by `OsStr`. | |
| /// As discussed in the [`OsString`] introduction, [`OsString`] and `OsStr` | |
| /// store strings in a form best suited for cheap inter-conversion between | |
| /// native-platform and Rust string forms, which may differ significantly | |
| /// from both of them, including in storage size and encoding. | |
| /// | |
| /// This number is simply useful for passing to other methods, like | |
| /// [`OsString::with_capacity`] to avoid reallocations. | |
| /// | |
| /// See the main `OsString` documentation information about encoding and capacity units. | |
| /// | |
| /// # Examples | |
| /// | |
| /// ``` | |
| /// use std::ffi::OsStr; | |
| /// | |
| /// let os_str = OsStr::new(""); | |
| /// assert_eq!(os_str.len(), 0); | |
| /// | |
| /// let os_str = OsStr::new("foo"); | |
| /// assert_eq!(os_str.len(), 3); | |
| /// ``` | |
| #[stable(feature = "osstring_simple_functions", since = "1.9.0")] | |
| #[must_use] | |
| #[inline] | |
| pub fn len(&self) -> usize { | |
| self.inner.inner.len() | |
| } | |
| /// Converts a <code>[Box]<[OsStr]></code> into an [`OsString`] without copying or allocating. | |
| #[stable(feature = "into_boxed_os_str", since = "1.20.0")] | |
| #[must_use = "`self` will be dropped if the result is not used"] | |
| pub fn into_os_string(self: Box<Self>) -> OsString { | |
| let boxed = unsafe { Box::from_raw(Box::into_raw(self) as *mut Slice) }; | |
| OsString { inner: Buf::from_box(boxed) } | |
| } | |
| /// Converts an OS string slice to a byte slice. To convert the byte slice back into an OS | |
| /// string slice, use the [`OsStr::from_encoded_bytes_unchecked`] function. | |
| /// | |
| /// The byte encoding is an unspecified, platform-specific, self-synchronizing superset of UTF-8. | |
| /// By being a self-synchronizing superset of UTF-8, this encoding is also a superset of 7-bit | |
| /// ASCII. | |
| /// | |
| /// Note: As the encoding is unspecified, any sub-slice of bytes that is not valid UTF-8 should | |
| /// be treated as opaque and only comparable within the same Rust version built for the same | |
| /// target platform. For example, sending the slice over the network or storing it in a file | |
| /// will likely result in incompatible byte slices. See [`OsString`] for more encoding details | |
| /// and [`std::ffi`] for platform-specific, specified conversions. | |
| /// | |
| /// [`std::ffi`]: crate::ffi | |
| #[inline] | |
| #[stable(feature = "os_str_bytes", since = "1.74.0")] | |
| pub fn as_encoded_bytes(&self) -> &[u8] { | |
| self.inner.as_encoded_bytes() | |
| } | |
| /// Takes a substring based on a range that corresponds to the return value of | |
| /// [`OsStr::as_encoded_bytes`]. | |
| /// | |
| /// The range's start and end must lie on valid `OsStr` boundaries. | |
| /// A valid `OsStr` boundary is one of: | |
| /// - The start of the string | |
| /// - The end of the string | |
| /// - Immediately before a valid non-empty UTF-8 substring | |
| /// - Immediately after a valid non-empty UTF-8 substring | |
| /// | |
| /// # Panics | |
| /// | |
| /// Panics if `range` does not lie on valid `OsStr` boundaries or if it | |
| /// exceeds the end of the string. | |
| /// | |
| /// # Example | |
| /// | |
| /// ``` | |
| /// #![feature(os_str_slice)] | |
| /// | |
| /// use std::ffi::OsStr; | |
| /// | |
| /// let os_str = OsStr::new("foo=bar"); | |
| /// let bytes = os_str.as_encoded_bytes(); | |
| /// if let Some(index) = bytes.iter().position(|b| *b == b'=') { | |
| /// let key = os_str.slice_encoded_bytes(..index); | |
| /// let value = os_str.slice_encoded_bytes(index + 1..); | |
| /// assert_eq!(key, "foo"); | |
| /// assert_eq!(value, "bar"); | |
| /// } | |
| /// ``` | |
| #[unstable(feature = "os_str_slice", issue = "118485")] | |
| pub fn slice_encoded_bytes<R: ops::RangeBounds<usize>>(&self, range: R) -> &Self { | |
| let encoded_bytes = self.as_encoded_bytes(); | |
| let Range { start, end } = slice::range(range, ..encoded_bytes.len()); | |
| // `check_public_boundary` should panic if the index does not lie on an | |
| // `OsStr` boundary as described above. It's possible to do this in an | |
| // encoding-agnostic way, but details of the internal encoding might | |
| // permit a more efficient implementation. | |
| self.inner.check_public_boundary(start); | |
| self.inner.check_public_boundary(end); | |
| // SAFETY: `slice::range` ensures that `start` and `end` are valid | |
| let slice = unsafe { encoded_bytes.get_unchecked(start..end) }; | |
| // SAFETY: `slice` comes from `self` and we validated the boundaries | |
| unsafe { Self::from_encoded_bytes_unchecked(slice) } | |
| } | |
| /// Converts this string to its ASCII lower case equivalent in-place. | |
| /// | |
| /// ASCII letters 'A' to 'Z' are mapped to 'a' to 'z', | |
| /// but non-ASCII letters are unchanged. | |
| /// | |
| /// To return a new lowercased value without modifying the existing one, use | |
| /// [`OsStr::to_ascii_lowercase`]. | |
| /// | |
| /// # Examples | |
| /// | |
| /// ``` | |
| /// use std::ffi::OsString; | |
| /// | |
| /// let mut s = OsString::from("GRÜßE, JÜRGEN ❤"); | |
| /// | |
| /// s.make_ascii_lowercase(); | |
| /// | |
| /// assert_eq!("grÜße, jÜrgen ❤", s); | |
| /// ``` | |
| #[stable(feature = "osstring_ascii", since = "1.53.0")] | |
| #[inline] | |
| pub fn make_ascii_lowercase(&mut self) { | |
| self.inner.make_ascii_lowercase() | |
| } | |
| /// Converts this string to its ASCII upper case equivalent in-place. | |
| /// | |
| /// ASCII letters 'a' to 'z' are mapped to 'A' to 'Z', | |
| /// but non-ASCII letters are unchanged. | |
| /// | |
| /// To return a new uppercased value without modifying the existing one, use | |
| /// [`OsStr::to_ascii_uppercase`]. | |
| /// | |
| /// # Examples | |
| /// | |
| /// ``` | |
| /// use std::ffi::OsString; | |
| /// | |
| /// let mut s = OsString::from("Grüße, Jürgen ❤"); | |
| /// | |
| /// s.make_ascii_uppercase(); | |
| /// | |
| /// assert_eq!("GRüßE, JüRGEN ❤", s); | |
| /// ``` | |
| #[stable(feature = "osstring_ascii", since = "1.53.0")] | |
| #[inline] | |
| pub fn make_ascii_uppercase(&mut self) { | |
| self.inner.make_ascii_uppercase() | |
| } | |
| /// Returns a copy of this string where each character is mapped to its | |
| /// ASCII lower case equivalent. | |
| /// | |
| /// ASCII letters 'A' to 'Z' are mapped to 'a' to 'z', | |
| /// but non-ASCII letters are unchanged. | |
| /// | |
| /// To lowercase the value in-place, use [`OsStr::make_ascii_lowercase`]. | |
| /// | |
| /// # Examples | |
| /// | |
| /// ``` | |
| /// use std::ffi::OsString; | |
| /// let s = OsString::from("Grüße, Jürgen ❤"); | |
| /// | |
| /// assert_eq!("grüße, jürgen ❤", s.to_ascii_lowercase()); | |
| /// ``` | |
| #[must_use = "to lowercase the value in-place, use `make_ascii_lowercase`"] | |
| #[stable(feature = "osstring_ascii", since = "1.53.0")] | |
| pub fn to_ascii_lowercase(&self) -> OsString { | |
| OsString::from_inner(self.inner.to_ascii_lowercase()) | |
| } | |
| /// Returns a copy of this string where each character is mapped to its | |
| /// ASCII upper case equivalent. | |
| /// | |
| /// ASCII letters 'a' to 'z' are mapped to 'A' to 'Z', | |
| /// but non-ASCII letters are unchanged. | |
| /// | |
| /// To uppercase the value in-place, use [`OsStr::make_ascii_uppercase`]. | |
| /// | |
| /// # Examples | |
| /// | |
| /// ``` | |
| /// use std::ffi::OsString; | |
| /// let s = OsString::from("Grüße, Jürgen ❤"); | |
| /// | |
| /// assert_eq!("GRüßE, JüRGEN ❤", s.to_ascii_uppercase()); | |
| /// ``` | |
| #[must_use = "to uppercase the value in-place, use `make_ascii_uppercase`"] | |
| #[stable(feature = "osstring_ascii", since = "1.53.0")] | |
| pub fn to_ascii_uppercase(&self) -> OsString { | |
| OsString::from_inner(self.inner.to_ascii_uppercase()) | |
| } | |
| /// Checks if all characters in this string are within the ASCII range. | |
| /// | |
| /// An empty string returns `true`. | |
| /// | |
| /// # Examples | |
| /// | |
| /// ``` | |
| /// use std::ffi::OsString; | |
| /// | |
| /// let ascii = OsString::from("hello!\n"); | |
| /// let non_ascii = OsString::from("Grüße, Jürgen ❤"); | |
| /// | |
| /// assert!(ascii.is_ascii()); | |
| /// assert!(!non_ascii.is_ascii()); | |
| /// ``` | |
| #[stable(feature = "osstring_ascii", since = "1.53.0")] | |
| #[must_use] | |
| #[inline] | |
| pub fn is_ascii(&self) -> bool { | |
| self.inner.is_ascii() | |
| } | |
| /// Checks that two strings are an ASCII case-insensitive match. | |
| /// | |
| /// Same as `to_ascii_lowercase(a) == to_ascii_lowercase(b)`, | |
| /// but without allocating and copying temporaries. | |
| /// | |
| /// # Examples | |
| /// | |
| /// ``` | |
| /// use std::ffi::OsString; | |
| /// | |
| /// assert!(OsString::from("Ferris").eq_ignore_ascii_case("FERRIS")); | |
| /// assert!(OsString::from("Ferrös").eq_ignore_ascii_case("FERRöS")); | |
| /// assert!(!OsString::from("Ferrös").eq_ignore_ascii_case("FERRÖS")); | |
| /// ``` | |
| #[stable(feature = "osstring_ascii", since = "1.53.0")] | |
| pub fn eq_ignore_ascii_case<S: AsRef<OsStr>>(&self, other: S) -> bool { | |
| self.inner.eq_ignore_ascii_case(&other.as_ref().inner) | |
| } | |
| /// Returns an object that implements [`Display`] for safely printing an | |
| /// [`OsStr`] that may contain non-Unicode data. This may perform lossy | |
| /// conversion, depending on the platform. If you would like an | |
| /// implementation which escapes the [`OsStr`] please use [`Debug`] | |
| /// instead. | |
| /// | |
| /// [`Display`]: fmt::Display | |
| /// [`Debug`]: fmt::Debug | |
| /// | |
| /// # Examples | |
| /// | |
| /// ``` | |
| /// use std::ffi::OsStr; | |
| /// | |
| /// let s = OsStr::new("Hello, world!"); | |
| /// println!("{}", s.display()); | |
| /// ``` | |
| #[stable(feature = "os_str_display", since = "1.87.0")] | |
| #[must_use = "this does not display the `OsStr`; \ | |
| it returns an object that can be displayed"] | |
| #[inline] | |
| pub fn display(&self) -> Display<'_> { | |
| Display { os_str: self } | |
| } | |
| /// Returns the same string as a string slice `&OsStr`. | |
| /// | |
| /// This method is redundant when used directly on `&OsStr`, but | |
| /// it helps dereferencing other string-like types to string slices, | |
| /// for example references to `Box<OsStr>` or `Arc<OsStr>`. | |
| #[inline] | |
| #[unstable(feature = "str_as_str", issue = "130366")] | |
| pub const fn as_os_str(&self) -> &OsStr { | |
| self | |
| } | |
| } | |
| #[stable(feature = "box_from_os_str", since = "1.17.0")] | |
| impl From<&OsStr> for Box<OsStr> { | |
| /// Copies the string into a newly allocated <code>[Box]<[OsStr]></code>. | |
| #[inline] | |
| fn from(s: &OsStr) -> Box<OsStr> { | |
| Box::clone_from_ref(s) | |
| } | |
| } | |
| #[stable(feature = "box_from_mut_slice", since = "1.84.0")] | |
| impl From<&mut OsStr> for Box<OsStr> { | |
| /// Copies the string into a newly allocated <code>[Box]<[OsStr]></code>. | |
| #[inline] | |
| fn from(s: &mut OsStr) -> Box<OsStr> { | |
| Self::from(&*s) | |
| } | |
| } | |
| #[stable(feature = "box_from_cow", since = "1.45.0")] | |
| impl From<Cow<'_, OsStr>> for Box<OsStr> { | |
| /// Converts a `Cow<'a, OsStr>` into a <code>[Box]<[OsStr]></code>, | |
| /// by copying the contents if they are borrowed. | |
| #[inline] | |
| fn from(cow: Cow<'_, OsStr>) -> Box<OsStr> { | |
| match cow { | |
| Cow::Borrowed(s) => Box::from(s), | |
| Cow::Owned(s) => Box::from(s), | |
| } | |
| } | |
| } | |
| #[stable(feature = "os_string_from_box", since = "1.18.0")] | |
| impl From<Box<OsStr>> for OsString { | |
| /// Converts a <code>[Box]<[OsStr]></code> into an [`OsString`] without copying or | |
| /// allocating. | |
| #[inline] | |
| fn from(boxed: Box<OsStr>) -> OsString { | |
| boxed.into_os_string() | |
| } | |
| } | |
| #[stable(feature = "box_from_os_string", since = "1.20.0")] | |
| impl From<OsString> for Box<OsStr> { | |
| /// Converts an [`OsString`] into a <code>[Box]<[OsStr]></code> without copying or allocating. | |
| #[inline] | |
| fn from(s: OsString) -> Box<OsStr> { | |
| s.into_boxed_os_str() | |
| } | |
| } | |
| #[stable(feature = "more_box_slice_clone", since = "1.29.0")] | |
| impl Clone for Box<OsStr> { | |
| #[inline] | |
| fn clone(&self) -> Self { | |
| self.to_os_string().into_boxed_os_str() | |
| } | |
| } | |
| #[unstable(feature = "clone_to_uninit", issue = "126799")] | |
| unsafe impl CloneToUninit for OsStr { | |
| #[inline] | |
| #[cfg_attr(debug_assertions, track_caller)] | |
| unsafe fn clone_to_uninit(&self, dst: *mut u8) { | |
| // SAFETY: we're just a transparent wrapper around a platform-specific Slice | |
| unsafe { self.inner.clone_to_uninit(dst) } | |
| } | |
| } | |
| #[stable(feature = "shared_from_slice2", since = "1.24.0")] | |
| impl From<OsString> for Arc<OsStr> { | |
| /// Converts an [`OsString`] into an <code>[Arc]<[OsStr]></code> by moving the [`OsString`] | |
| /// data into a new [`Arc`] buffer. | |
| #[inline] | |
| fn from(s: OsString) -> Arc<OsStr> { | |
| let arc = s.inner.into_arc(); | |
| unsafe { Arc::from_raw(Arc::into_raw(arc) as *const OsStr) } | |
| } | |
| } | |
| #[stable(feature = "shared_from_slice2", since = "1.24.0")] | |
| impl From<&OsStr> for Arc<OsStr> { | |
| /// Copies the string into a newly allocated <code>[Arc]<[OsStr]></code>. | |
| #[inline] | |
| fn from(s: &OsStr) -> Arc<OsStr> { | |
| let arc = s.inner.into_arc(); | |
| unsafe { Arc::from_raw(Arc::into_raw(arc) as *const OsStr) } | |
| } | |
| } | |
| #[stable(feature = "shared_from_mut_slice", since = "1.84.0")] | |
| impl From<&mut OsStr> for Arc<OsStr> { | |
| /// Copies the string into a newly allocated <code>[Arc]<[OsStr]></code>. | |
| #[inline] | |
| fn from(s: &mut OsStr) -> Arc<OsStr> { | |
| Arc::from(&*s) | |
| } | |
| } | |
| #[stable(feature = "shared_from_slice2", since = "1.24.0")] | |
| impl From<OsString> for Rc<OsStr> { | |
| /// Converts an [`OsString`] into an <code>[Rc]<[OsStr]></code> by moving the [`OsString`] | |
| /// data into a new [`Rc`] buffer. | |
| #[inline] | |
| fn from(s: OsString) -> Rc<OsStr> { | |
| let rc = s.inner.into_rc(); | |
| unsafe { Rc::from_raw(Rc::into_raw(rc) as *const OsStr) } | |
| } | |
| } | |
| #[stable(feature = "shared_from_slice2", since = "1.24.0")] | |
| impl From<&OsStr> for Rc<OsStr> { | |
| /// Copies the string into a newly allocated <code>[Rc]<[OsStr]></code>. | |
| #[inline] | |
| fn from(s: &OsStr) -> Rc<OsStr> { | |
| let rc = s.inner.into_rc(); | |
| unsafe { Rc::from_raw(Rc::into_raw(rc) as *const OsStr) } | |
| } | |
| } | |
| #[stable(feature = "shared_from_mut_slice", since = "1.84.0")] | |
| impl From<&mut OsStr> for Rc<OsStr> { | |
| /// Copies the string into a newly allocated <code>[Rc]<[OsStr]></code>. | |
| #[inline] | |
| fn from(s: &mut OsStr) -> Rc<OsStr> { | |
| Rc::from(&*s) | |
| } | |
| } | |
| #[stable(feature = "cow_from_osstr", since = "1.28.0")] | |
| impl<'a> From<OsString> for Cow<'a, OsStr> { | |
| /// Moves the string into a [`Cow::Owned`]. | |
| #[inline] | |
| fn from(s: OsString) -> Cow<'a, OsStr> { | |
| Cow::Owned(s) | |
| } | |
| } | |
| #[stable(feature = "cow_from_osstr", since = "1.28.0")] | |
| impl<'a> From<&'a OsStr> for Cow<'a, OsStr> { | |
| /// Converts the string reference into a [`Cow::Borrowed`]. | |
| #[inline] | |
| fn from(s: &'a OsStr) -> Cow<'a, OsStr> { | |
| Cow::Borrowed(s) | |
| } | |
| } | |
| #[stable(feature = "cow_from_osstr", since = "1.28.0")] | |
| impl<'a> From<&'a OsString> for Cow<'a, OsStr> { | |
| /// Converts the string reference into a [`Cow::Borrowed`]. | |
| #[inline] | |
| fn from(s: &'a OsString) -> Cow<'a, OsStr> { | |
| Cow::Borrowed(s.as_os_str()) | |
| } | |
| } | |
| #[stable(feature = "osstring_from_cow_osstr", since = "1.28.0")] | |
| impl<'a> From<Cow<'a, OsStr>> for OsString { | |
| /// Converts a `Cow<'a, OsStr>` into an [`OsString`], | |
| /// by copying the contents if they are borrowed. | |
| #[inline] | |
| fn from(s: Cow<'a, OsStr>) -> Self { | |
| s.into_owned() | |
| } | |
| } | |
| #[stable(feature = "str_tryfrom_osstr_impl", since = "1.72.0")] | |
| impl<'a> TryFrom<&'a OsStr> for &'a str { | |
| type Error = crate::str::Utf8Error; | |
| /// Tries to convert an `&OsStr` to a `&str`. | |
| /// | |
| /// ``` | |
| /// use std::ffi::OsStr; | |
| /// | |
| /// let os_str = OsStr::new("foo"); | |
| /// let as_str = <&str>::try_from(os_str).unwrap(); | |
| /// assert_eq!(as_str, "foo"); | |
| /// ``` | |
| fn try_from(value: &'a OsStr) -> Result<Self, Self::Error> { | |
| value.inner.to_str() | |
| } | |
| } | |
| #[stable(feature = "box_default_extra", since = "1.17.0")] | |
| impl Default for Box<OsStr> { | |
| #[inline] | |
| fn default() -> Box<OsStr> { | |
| let rw = Box::into_raw(Slice::empty_box()) as *mut OsStr; | |
| unsafe { Box::from_raw(rw) } | |
| } | |
| } | |
| #[stable(feature = "osstring_default", since = "1.9.0")] | |
| impl Default for &OsStr { | |
| /// Creates an empty `OsStr`. | |
| #[inline] | |
| fn default() -> Self { | |
| OsStr::new("") | |
| } | |
| } | |
| #[stable(feature = "rust1", since = "1.0.0")] | |
| impl PartialEq for OsStr { | |
| #[inline] | |
| fn eq(&self, other: &OsStr) -> bool { | |
| self.as_encoded_bytes().eq(other.as_encoded_bytes()) | |
| } | |
| } | |
| #[stable(feature = "rust1", since = "1.0.0")] | |
| impl PartialEq<str> for OsStr { | |
| #[inline] | |
| fn eq(&self, other: &str) -> bool { | |
| *self == *OsStr::new(other) | |
| } | |
| } | |
| #[stable(feature = "rust1", since = "1.0.0")] | |
| impl PartialEq<OsStr> for str { | |
| #[inline] | |
| fn eq(&self, other: &OsStr) -> bool { | |
| *other == *OsStr::new(self) | |
| } | |
| } | |
| #[stable(feature = "rust1", since = "1.0.0")] | |
| impl Eq for OsStr {} | |
| #[stable(feature = "rust1", since = "1.0.0")] | |
| impl PartialOrd for OsStr { | |
| #[inline] | |
| fn partial_cmp(&self, other: &OsStr) -> Option<cmp::Ordering> { | |
| self.as_encoded_bytes().partial_cmp(other.as_encoded_bytes()) | |
| } | |
| #[inline] | |
| fn lt(&self, other: &OsStr) -> bool { | |
| self.as_encoded_bytes().lt(other.as_encoded_bytes()) | |
| } | |
| #[inline] | |
| fn le(&self, other: &OsStr) -> bool { | |
| self.as_encoded_bytes().le(other.as_encoded_bytes()) | |
| } | |
| #[inline] | |
| fn gt(&self, other: &OsStr) -> bool { | |
| self.as_encoded_bytes().gt(other.as_encoded_bytes()) | |
| } | |
| #[inline] | |
| fn ge(&self, other: &OsStr) -> bool { | |
| self.as_encoded_bytes().ge(other.as_encoded_bytes()) | |
| } | |
| } | |
| #[stable(feature = "rust1", since = "1.0.0")] | |
| impl PartialOrd<str> for OsStr { | |
| #[inline] | |
| fn partial_cmp(&self, other: &str) -> Option<cmp::Ordering> { | |
| self.partial_cmp(OsStr::new(other)) | |
| } | |
| } | |
| // FIXME (#19470): cannot provide PartialOrd<OsStr> for str until we | |
| // have more flexible coherence rules. | |
| #[stable(feature = "rust1", since = "1.0.0")] | |
| impl Ord for OsStr { | |
| #[inline] | |
| fn cmp(&self, other: &OsStr) -> cmp::Ordering { | |
| self.as_encoded_bytes().cmp(other.as_encoded_bytes()) | |
| } | |
| } | |
| macro_rules! impl_cmp { | |
| ($lhs:ty, $rhs: ty) => { | |
| #[stable(feature = "cmp_os_str", since = "1.8.0")] | |
| impl PartialEq<$rhs> for $lhs { | |
| #[inline] | |
| fn eq(&self, other: &$rhs) -> bool { | |
| <OsStr as PartialEq>::eq(self, other) | |
| } | |
| } | |
| #[stable(feature = "cmp_os_str", since = "1.8.0")] | |
| impl PartialEq<$lhs> for $rhs { | |
| #[inline] | |
| fn eq(&self, other: &$lhs) -> bool { | |
| <OsStr as PartialEq>::eq(self, other) | |
| } | |
| } | |
| #[stable(feature = "cmp_os_str", since = "1.8.0")] | |
| impl PartialOrd<$rhs> for $lhs { | |
| #[inline] | |
| fn partial_cmp(&self, other: &$rhs) -> Option<cmp::Ordering> { | |
| <OsStr as PartialOrd>::partial_cmp(self, other) | |
| } | |
| } | |
| #[stable(feature = "cmp_os_str", since = "1.8.0")] | |
| impl PartialOrd<$lhs> for $rhs { | |
| #[inline] | |
| fn partial_cmp(&self, other: &$lhs) -> Option<cmp::Ordering> { | |
| <OsStr as PartialOrd>::partial_cmp(self, other) | |
| } | |
| } | |
| }; | |
| } | |
| impl_cmp!(OsString, OsStr); | |
| impl_cmp!(OsString, &OsStr); | |
| impl_cmp!(Cow<'_, OsStr>, OsStr); | |
| impl_cmp!(Cow<'_, OsStr>, &OsStr); | |
| impl_cmp!(Cow<'_, OsStr>, OsString); | |
| #[stable(feature = "rust1", since = "1.0.0")] | |
| impl Hash for OsStr { | |
| #[inline] | |
| fn hash<H: Hasher>(&self, state: &mut H) { | |
| self.as_encoded_bytes().hash(state) | |
| } | |
| } | |
| #[stable(feature = "rust1", since = "1.0.0")] | |
| impl fmt::Debug for OsStr { | |
| fn fmt(&self, formatter: &mut fmt::Formatter<'_>) -> fmt::Result { | |
| fmt::Debug::fmt(&self.inner, formatter) | |
| } | |
| } | |
| /// Helper struct for safely printing an [`OsStr`] with [`format!`] and `{}`. | |
| /// | |
| /// An [`OsStr`] might contain non-Unicode data. This `struct` implements the | |
| /// [`Display`] trait in a way that mitigates that. It is created by the | |
| /// [`display`](OsStr::display) method on [`OsStr`]. This may perform lossy | |
| /// conversion, depending on the platform. If you would like an implementation | |
| /// which escapes the [`OsStr`] please use [`Debug`] instead. | |
| /// | |
| /// # Examples | |
| /// | |
| /// ``` | |
| /// use std::ffi::OsStr; | |
| /// | |
| /// let s = OsStr::new("Hello, world!"); | |
| /// println!("{}", s.display()); | |
| /// ``` | |
| /// | |
| /// [`Display`]: fmt::Display | |
| /// [`format!`]: crate::format | |
| #[stable(feature = "os_str_display", since = "1.87.0")] | |
| pub struct Display<'a> { | |
| os_str: &'a OsStr, | |
| } | |
| #[stable(feature = "os_str_display", since = "1.87.0")] | |
| impl fmt::Debug for Display<'_> { | |
| fn fmt(&self, f: &mut fmt::Formatter<'_>) -> fmt::Result { | |
| fmt::Debug::fmt(&self.os_str, f) | |
| } | |
| } | |
| #[stable(feature = "os_str_display", since = "1.87.0")] | |
| impl fmt::Display for Display<'_> { | |
| fn fmt(&self, f: &mut fmt::Formatter<'_>) -> fmt::Result { | |
| fmt::Display::fmt(&self.os_str.inner, f) | |
| } | |
| } | |
| #[unstable(feature = "slice_concat_ext", issue = "27747")] | |
| impl<S: Borrow<OsStr>> alloc::slice::Join<&OsStr> for [S] { | |
| type Output = OsString; | |
| fn join(slice: &Self, sep: &OsStr) -> OsString { | |
| let Some((first, suffix)) = slice.split_first() else { | |
| return OsString::new(); | |
| }; | |
| let first_owned = first.borrow().to_owned(); | |
| suffix.iter().fold(first_owned, |mut a, b| { | |
| a.push(sep); | |
| a.push(b.borrow()); | |
| a | |
| }) | |
| } | |
| } | |
| #[stable(feature = "rust1", since = "1.0.0")] | |
| impl Borrow<OsStr> for OsString { | |
| #[inline] | |
| fn borrow(&self) -> &OsStr { | |
| &self[..] | |
| } | |
| } | |
| #[stable(feature = "rust1", since = "1.0.0")] | |
| impl ToOwned for OsStr { | |
| type Owned = OsString; | |
| #[inline] | |
| fn to_owned(&self) -> OsString { | |
| self.to_os_string() | |
| } | |
| #[inline] | |
| fn clone_into(&self, target: &mut OsString) { | |
| self.inner.clone_into(&mut target.inner) | |
| } | |
| } | |
| #[stable(feature = "rust1", since = "1.0.0")] | |
| #[rustc_const_unstable(feature = "const_convert", issue = "143773")] | |
| impl const AsRef<OsStr> for OsStr { | |
| #[inline] | |
| fn as_ref(&self) -> &OsStr { | |
| self | |
| } | |
| } | |
| #[stable(feature = "rust1", since = "1.0.0")] | |
| impl AsRef<OsStr> for OsString { | |
| #[inline] | |
| fn as_ref(&self) -> &OsStr { | |
| self | |
| } | |
| } | |
| #[stable(feature = "rust1", since = "1.0.0")] | |
| impl AsRef<OsStr> for str { | |
| #[inline] | |
| fn as_ref(&self) -> &OsStr { | |
| OsStr::from_inner(Slice::from_str(self)) | |
| } | |
| } | |
| #[stable(feature = "rust1", since = "1.0.0")] | |
| impl AsRef<OsStr> for String { | |
| #[inline] | |
| fn as_ref(&self) -> &OsStr { | |
| (&**self).as_ref() | |
| } | |
| } | |
| impl FromInner<Buf> for OsString { | |
| #[inline] | |
| fn from_inner(buf: Buf) -> OsString { | |
| OsString { inner: buf } | |
| } | |
| } | |
| impl IntoInner<Buf> for OsString { | |
| #[inline] | |
| fn into_inner(self) -> Buf { | |
| self.inner | |
| } | |
| } | |
| impl AsInner<Slice> for OsStr { | |
| #[inline] | |
| fn as_inner(&self) -> &Slice { | |
| &self.inner | |
| } | |
| } | |
| #[stable(feature = "osstring_from_str", since = "1.45.0")] | |
| impl FromStr for OsString { | |
| type Err = core::convert::Infallible; | |
| #[inline] | |
| fn from_str(s: &str) -> Result<Self, Self::Err> { | |
| Ok(OsString::from(s)) | |
| } | |
| } | |
| #[stable(feature = "osstring_extend", since = "1.52.0")] | |
| impl Extend<OsString> for OsString { | |
| #[inline] | |
| fn extend<T: IntoIterator<Item = OsString>>(&mut self, iter: T) { | |
| for s in iter { | |
| self.push(&s); | |
| } | |
| } | |
| } | |
| #[stable(feature = "osstring_extend", since = "1.52.0")] | |
| impl<'a> Extend<&'a OsStr> for OsString { | |
| #[inline] | |
| fn extend<T: IntoIterator<Item = &'a OsStr>>(&mut self, iter: T) { | |
| for s in iter { | |
| self.push(s); | |
| } | |
| } | |
| } | |
| #[stable(feature = "osstring_extend", since = "1.52.0")] | |
| impl<'a> Extend<Cow<'a, OsStr>> for OsString { | |
| #[inline] | |
| fn extend<T: IntoIterator<Item = Cow<'a, OsStr>>>(&mut self, iter: T) { | |
| for s in iter { | |
| self.push(&s); | |
| } | |
| } | |
| } | |
| #[stable(feature = "osstring_extend", since = "1.52.0")] | |
| impl FromIterator<OsString> for OsString { | |
| #[inline] | |
| fn from_iter<I: IntoIterator<Item = OsString>>(iter: I) -> Self { | |
| let mut iterator = iter.into_iter(); | |
| // Because we're iterating over `OsString`s, we can avoid at least | |
| // one allocation by getting the first string from the iterator | |
| // and appending to it all the subsequent strings. | |
| match iterator.next() { | |
| None => OsString::new(), | |
| Some(mut buf) => { | |
| buf.extend(iterator); | |
| buf | |
| } | |
| } | |
| } | |
| } | |
| #[stable(feature = "osstring_extend", since = "1.52.0")] | |
| impl<'a> FromIterator<&'a OsStr> for OsString { | |
| #[inline] | |
| fn from_iter<I: IntoIterator<Item = &'a OsStr>>(iter: I) -> Self { | |
| let mut buf = Self::new(); | |
| for s in iter { | |
| buf.push(s); | |
| } | |
| buf | |
| } | |
| } | |
| #[stable(feature = "osstring_extend", since = "1.52.0")] | |
| impl<'a> FromIterator<Cow<'a, OsStr>> for OsString { | |
| #[inline] | |
| fn from_iter<I: IntoIterator<Item = Cow<'a, OsStr>>>(iter: I) -> Self { | |
| let mut iterator = iter.into_iter(); | |
| // Because we're iterating over `OsString`s, we can avoid at least | |
| // one allocation by getting the first owned string from the iterator | |
| // and appending to it all the subsequent strings. | |
| match iterator.next() { | |
| None => OsString::new(), | |
| Some(Cow::Owned(mut buf)) => { | |
| buf.extend(iterator); | |
| buf | |
| } | |
| Some(Cow::Borrowed(buf)) => { | |
| let mut buf = OsString::from(buf); | |
| buf.extend(iterator); | |
| buf | |
| } | |
| } | |
| } | |
| } |