| use crate::cmp::Ordering; |
| use crate::fmt; |
| use crate::hash; |
| use crate::intrinsics; |
| use crate::marker::Unsize; |
| use crate::mem::{MaybeUninit, SizedTypeProperties}; |
| use crate::num::NonZero; |
| use crate::ops::{CoerceUnsized, DispatchFromDyn}; |
| use crate::ptr; |
| use crate::ptr::Unique; |
| use crate::slice::{self, SliceIndex}; |
| use crate::ub_checks::assert_unsafe_precondition; |
| |
| /// `*mut T` but non-zero and [covariant]. |
| /// |
| /// This is often the correct thing to use when building data structures using |
| /// raw pointers, but is ultimately more dangerous to use because of its additional |
| /// properties. If you're not sure if you should use `NonNull<T>`, just use `*mut T`! |
| /// |
| /// Unlike `*mut T`, the pointer must always be non-null, even if the pointer |
| /// is never dereferenced. This is so that enums may use this forbidden value |
| /// as a discriminant -- `Option<NonNull<T>>` has the same size as `*mut T`. |
| /// However the pointer may still dangle if it isn't dereferenced. |
| /// |
| /// Unlike `*mut T`, `NonNull<T>` was chosen to be covariant over `T`. This makes it |
| /// possible to use `NonNull<T>` when building covariant types, but introduces the |
| /// risk of unsoundness if used in a type that shouldn't actually be covariant. |
| /// (The opposite choice was made for `*mut T` even though technically the unsoundness |
| /// could only be caused by calling unsafe functions.) |
| /// |
| /// Covariance is correct for most safe abstractions, such as `Box`, `Rc`, `Arc`, `Vec`, |
| /// and `LinkedList`. This is the case because they provide a public API that follows the |
| /// normal shared XOR mutable rules of Rust. |
| /// |
| /// If your type cannot safely be covariant, you must ensure it contains some |
| /// additional field to provide invariance. Often this field will be a [`PhantomData`] |
| /// type like `PhantomData<Cell<T>>` or `PhantomData<&'a mut T>`. |
| /// |
| /// Notice that `NonNull<T>` has a `From` instance for `&T`. However, this does |
| /// not change the fact that mutating through a (pointer derived from a) shared |
| /// reference is undefined behavior unless the mutation happens inside an |
| /// [`UnsafeCell<T>`]. The same goes for creating a mutable reference from a shared |
| /// reference. When using this `From` instance without an `UnsafeCell<T>`, |
| /// it is your responsibility to ensure that `as_mut` is never called, and `as_ptr` |
| /// is never used for mutation. |
| /// |
| /// # Representation |
| /// |
| /// Thanks to the [null pointer optimization], |
| /// `NonNull<T>` and `Option<NonNull<T>>` |
| /// are guaranteed to have the same size and alignment: |
| /// |
| /// ``` |
| /// # use std::mem::{size_of, align_of}; |
| /// use std::ptr::NonNull; |
| /// |
| /// assert_eq!(size_of::<NonNull<i16>>(), size_of::<Option<NonNull<i16>>>()); |
| /// assert_eq!(align_of::<NonNull<i16>>(), align_of::<Option<NonNull<i16>>>()); |
| /// |
| /// assert_eq!(size_of::<NonNull<str>>(), size_of::<Option<NonNull<str>>>()); |
| /// assert_eq!(align_of::<NonNull<str>>(), align_of::<Option<NonNull<str>>>()); |
| /// ``` |
| /// |
| /// [covariant]: https://doc.rust-lang.org/reference/subtyping.html |
| /// [`PhantomData`]: crate::marker::PhantomData |
| /// [`UnsafeCell<T>`]: crate::cell::UnsafeCell |
| /// [null pointer optimization]: crate::option#representation |
| #[stable(feature = "nonnull", since = "1.25.0")] |
| #[repr(transparent)] |
| #[rustc_layout_scalar_valid_range_start(1)] |
| #[rustc_nonnull_optimization_guaranteed] |
| #[rustc_diagnostic_item = "NonNull"] |
| pub struct NonNull<T: ?Sized> { |
| pointer: *const T, |
| } |
| |
| /// `NonNull` pointers are not `Send` because the data they reference may be aliased. |
| // N.B., this impl is unnecessary, but should provide better error messages. |
| #[stable(feature = "nonnull", since = "1.25.0")] |
| impl<T: ?Sized> !Send for NonNull<T> {} |
| |
| /// `NonNull` pointers are not `Sync` because the data they reference may be aliased. |
| // N.B., this impl is unnecessary, but should provide better error messages. |
| #[stable(feature = "nonnull", since = "1.25.0")] |
| impl<T: ?Sized> !Sync for NonNull<T> {} |
| |
| impl<T: Sized> NonNull<T> { |
| /// Creates a new `NonNull` that is dangling, but well-aligned. |
| /// |
| /// This is useful for initializing types which lazily allocate, like |
| /// `Vec::new` does. |
| /// |
| /// Note that the pointer value may potentially represent a valid pointer to |
| /// a `T`, which means this must not be used as a "not yet initialized" |
| /// sentinel value. Types that lazily allocate must track initialization by |
| /// some other means. |
| /// |
| /// # Examples |
| /// |
| /// ``` |
| /// use std::ptr::NonNull; |
| /// |
| /// let ptr = NonNull::<u32>::dangling(); |
| /// // Important: don't try to access the value of `ptr` without |
| /// // initializing it first! The pointer is not null but isn't valid either! |
| /// ``` |
| #[stable(feature = "nonnull", since = "1.25.0")] |
| #[rustc_const_stable(feature = "const_nonnull_dangling", since = "1.36.0")] |
| #[must_use] |
| #[inline] |
| pub const fn dangling() -> Self { |
| // SAFETY: mem::align_of() returns a non-zero usize which is then casted |
| // to a *mut T. Therefore, `ptr` is not null and the conditions for |
| // calling new_unchecked() are respected. |
| unsafe { |
| let ptr = crate::ptr::dangling_mut::<T>(); |
| NonNull::new_unchecked(ptr) |
| } |
| } |
| |
| /// Returns a shared references to the value. In contrast to [`as_ref`], this does not require |
| /// that the value has to be initialized. |
| /// |
| /// For the mutable counterpart see [`as_uninit_mut`]. |
| /// |
| /// [`as_ref`]: NonNull::as_ref |
| /// [`as_uninit_mut`]: NonNull::as_uninit_mut |
| /// |
| /// # Safety |
| /// |
| /// When calling this method, you have to ensure that all of the following is true: |
| /// |
| /// * The pointer must be properly aligned. |
| /// |
| /// * It must be "dereferenceable" in the sense defined in [the module documentation]. |
| /// |
| /// * You must enforce Rust's aliasing rules, since the returned lifetime `'a` is |
| /// arbitrarily chosen and does not necessarily reflect the actual lifetime of the data. |
| /// In particular, while this reference exists, the memory the pointer points to must |
| /// not get mutated (except inside `UnsafeCell`). |
| /// |
| /// This applies even if the result of this method is unused! |
| /// |
| /// [the module documentation]: crate::ptr#safety |
| #[inline] |
| #[must_use] |
| #[unstable(feature = "ptr_as_uninit", issue = "75402")] |
| #[rustc_const_unstable(feature = "const_ptr_as_ref", issue = "91822")] |
| pub const unsafe fn as_uninit_ref<'a>(self) -> &'a MaybeUninit<T> { |
| // SAFETY: the caller must guarantee that `self` meets all the |
| // requirements for a reference. |
| unsafe { &*self.cast().as_ptr() } |
| } |
| |
| /// Returns a unique references to the value. In contrast to [`as_mut`], this does not require |
| /// that the value has to be initialized. |
| /// |
| /// For the shared counterpart see [`as_uninit_ref`]. |
| /// |
| /// [`as_mut`]: NonNull::as_mut |
| /// [`as_uninit_ref`]: NonNull::as_uninit_ref |
| /// |
| /// # Safety |
| /// |
| /// When calling this method, you have to ensure that all of the following is true: |
| /// |
| /// * The pointer must be properly aligned. |
| /// |
| /// * It must be "dereferenceable" in the sense defined in [the module documentation]. |
| /// |
| /// * You must enforce Rust's aliasing rules, since the returned lifetime `'a` is |
| /// arbitrarily chosen and does not necessarily reflect the actual lifetime of the data. |
| /// In particular, while this reference exists, the memory the pointer points to must |
| /// not get accessed (read or written) through any other pointer. |
| /// |
| /// This applies even if the result of this method is unused! |
| /// |
| /// [the module documentation]: crate::ptr#safety |
| #[inline] |
| #[must_use] |
| #[unstable(feature = "ptr_as_uninit", issue = "75402")] |
| #[rustc_const_unstable(feature = "const_ptr_as_ref", issue = "91822")] |
| pub const unsafe fn as_uninit_mut<'a>(self) -> &'a mut MaybeUninit<T> { |
| // SAFETY: the caller must guarantee that `self` meets all the |
| // requirements for a reference. |
| unsafe { &mut *self.cast().as_ptr() } |
| } |
| } |
| |
| impl<T: ?Sized> NonNull<T> { |
| /// Creates a new `NonNull`. |
| /// |
| /// # Safety |
| /// |
| /// `ptr` must be non-null. |
| /// |
| /// # Examples |
| /// |
| /// ``` |
| /// use std::ptr::NonNull; |
| /// |
| /// let mut x = 0u32; |
| /// let ptr = unsafe { NonNull::new_unchecked(&mut x as *mut _) }; |
| /// ``` |
| /// |
| /// *Incorrect* usage of this function: |
| /// |
| /// ```rust,no_run |
| /// use std::ptr::NonNull; |
| /// |
| /// // NEVER DO THAT!!! This is undefined behavior. ⚠️ |
| /// let ptr = unsafe { NonNull::<u32>::new_unchecked(std::ptr::null_mut()) }; |
| /// ``` |
| #[stable(feature = "nonnull", since = "1.25.0")] |
| #[rustc_const_stable(feature = "const_nonnull_new_unchecked", since = "1.25.0")] |
| #[inline] |
| pub const unsafe fn new_unchecked(ptr: *mut T) -> Self { |
| // SAFETY: the caller must guarantee that `ptr` is non-null. |
| unsafe { |
| assert_unsafe_precondition!( |
| check_language_ub, |
| "NonNull::new_unchecked requires that the pointer is non-null", |
| (ptr: *mut () = ptr as *mut ()) => !ptr.is_null() |
| ); |
| NonNull { pointer: ptr as _ } |
| } |
| } |
| |
| /// Creates a new `NonNull` if `ptr` is non-null. |
| /// |
| /// # Examples |
| /// |
| /// ``` |
| /// use std::ptr::NonNull; |
| /// |
| /// let mut x = 0u32; |
| /// let ptr = NonNull::<u32>::new(&mut x as *mut _).expect("ptr is null!"); |
| /// |
| /// if let Some(ptr) = NonNull::<u32>::new(std::ptr::null_mut()) { |
| /// unreachable!(); |
| /// } |
| /// ``` |
| #[stable(feature = "nonnull", since = "1.25.0")] |
| #[rustc_const_unstable(feature = "const_nonnull_new", issue = "93235")] |
| #[inline] |
| pub const fn new(ptr: *mut T) -> Option<Self> { |
| if !ptr.is_null() { |
| // SAFETY: The pointer is already checked and is not null |
| Some(unsafe { Self::new_unchecked(ptr) }) |
| } else { |
| None |
| } |
| } |
| |
| /// Performs the same functionality as [`std::ptr::from_raw_parts`], except that a |
| /// `NonNull` pointer is returned, as opposed to a raw `*const` pointer. |
| /// |
| /// See the documentation of [`std::ptr::from_raw_parts`] for more details. |
| /// |
| /// [`std::ptr::from_raw_parts`]: crate::ptr::from_raw_parts |
| #[unstable(feature = "ptr_metadata", issue = "81513")] |
| #[rustc_const_unstable(feature = "ptr_metadata", issue = "81513")] |
| #[inline] |
| pub const fn from_raw_parts( |
| data_pointer: NonNull<()>, |
| metadata: <T as super::Pointee>::Metadata, |
| ) -> NonNull<T> { |
| // SAFETY: The result of `ptr::from::raw_parts_mut` is non-null because `data_pointer` is. |
| unsafe { |
| NonNull::new_unchecked(super::from_raw_parts_mut(data_pointer.as_ptr(), metadata)) |
| } |
| } |
| |
| /// Decompose a (possibly wide) pointer into its data pointer and metadata components. |
| /// |
| /// The pointer can be later reconstructed with [`NonNull::from_raw_parts`]. |
| #[unstable(feature = "ptr_metadata", issue = "81513")] |
| #[rustc_const_unstable(feature = "ptr_metadata", issue = "81513")] |
| #[must_use = "this returns the result of the operation, \ |
| without modifying the original"] |
| #[inline] |
| pub const fn to_raw_parts(self) -> (NonNull<()>, <T as super::Pointee>::Metadata) { |
| (self.cast(), super::metadata(self.as_ptr())) |
| } |
| |
| /// Gets the "address" portion of the pointer. |
| /// |
| /// For more details see the equivalent method on a raw pointer, [`pointer::addr`]. |
| /// |
| /// This API and its claimed semantics are part of the Strict Provenance experiment, |
| /// see the [`ptr` module documentation][crate::ptr]. |
| #[must_use] |
| #[inline] |
| #[unstable(feature = "strict_provenance", issue = "95228")] |
| pub fn addr(self) -> NonZero<usize> { |
| // SAFETY: The pointer is guaranteed by the type to be non-null, |
| // meaning that the address will be non-zero. |
| unsafe { NonZero::new_unchecked(self.pointer.addr()) } |
| } |
| |
| /// Creates a new pointer with the given address. |
| /// |
| /// For more details see the equivalent method on a raw pointer, [`pointer::with_addr`]. |
| /// |
| /// This API and its claimed semantics are part of the Strict Provenance experiment, |
| /// see the [`ptr` module documentation][crate::ptr]. |
| #[must_use] |
| #[inline] |
| #[unstable(feature = "strict_provenance", issue = "95228")] |
| pub fn with_addr(self, addr: NonZero<usize>) -> Self { |
| // SAFETY: The result of `ptr::from::with_addr` is non-null because `addr` is guaranteed to be non-zero. |
| unsafe { NonNull::new_unchecked(self.pointer.with_addr(addr.get()) as *mut _) } |
| } |
| |
| /// Creates a new pointer by mapping `self`'s address to a new one. |
| /// |
| /// For more details see the equivalent method on a raw pointer, [`pointer::map_addr`]. |
| /// |
| /// This API and its claimed semantics are part of the Strict Provenance experiment, |
| /// see the [`ptr` module documentation][crate::ptr]. |
| #[must_use] |
| #[inline] |
| #[unstable(feature = "strict_provenance", issue = "95228")] |
| pub fn map_addr(self, f: impl FnOnce(NonZero<usize>) -> NonZero<usize>) -> Self { |
| self.with_addr(f(self.addr())) |
| } |
| |
| /// Acquires the underlying `*mut` pointer. |
| /// |
| /// # Examples |
| /// |
| /// ``` |
| /// use std::ptr::NonNull; |
| /// |
| /// let mut x = 0u32; |
| /// let ptr = NonNull::new(&mut x).expect("ptr is null!"); |
| /// |
| /// let x_value = unsafe { *ptr.as_ptr() }; |
| /// assert_eq!(x_value, 0); |
| /// |
| /// unsafe { *ptr.as_ptr() += 2; } |
| /// let x_value = unsafe { *ptr.as_ptr() }; |
| /// assert_eq!(x_value, 2); |
| /// ``` |
| #[stable(feature = "nonnull", since = "1.25.0")] |
| #[rustc_const_stable(feature = "const_nonnull_as_ptr", since = "1.32.0")] |
| #[rustc_never_returns_null_ptr] |
| #[must_use] |
| #[inline(always)] |
| pub const fn as_ptr(self) -> *mut T { |
| self.pointer as *mut T |
| } |
| |
| /// Returns a shared reference to the value. If the value may be uninitialized, [`as_uninit_ref`] |
| /// must be used instead. |
| /// |
| /// For the mutable counterpart see [`as_mut`]. |
| /// |
| /// [`as_uninit_ref`]: NonNull::as_uninit_ref |
| /// [`as_mut`]: NonNull::as_mut |
| /// |
| /// # Safety |
| /// |
| /// When calling this method, you have to ensure that all of the following is true: |
| /// |
| /// * The pointer must be properly aligned. |
| /// |
| /// * It must be "dereferenceable" in the sense defined in [the module documentation]. |
| /// |
| /// * The pointer must point to an initialized instance of `T`. |
| /// |
| /// * You must enforce Rust's aliasing rules, since the returned lifetime `'a` is |
| /// arbitrarily chosen and does not necessarily reflect the actual lifetime of the data. |
| /// In particular, while this reference exists, the memory the pointer points to must |
| /// not get mutated (except inside `UnsafeCell`). |
| /// |
| /// This applies even if the result of this method is unused! |
| /// (The part about being initialized is not yet fully decided, but until |
| /// it is, the only safe approach is to ensure that they are indeed initialized.) |
| /// |
| /// # Examples |
| /// |
| /// ``` |
| /// use std::ptr::NonNull; |
| /// |
| /// let mut x = 0u32; |
| /// let ptr = NonNull::new(&mut x as *mut _).expect("ptr is null!"); |
| /// |
| /// let ref_x = unsafe { ptr.as_ref() }; |
| /// println!("{ref_x}"); |
| /// ``` |
| /// |
| /// [the module documentation]: crate::ptr#safety |
| #[stable(feature = "nonnull", since = "1.25.0")] |
| #[rustc_const_stable(feature = "const_nonnull_as_ref", since = "1.73.0")] |
| #[must_use] |
| #[inline(always)] |
| pub const unsafe fn as_ref<'a>(&self) -> &'a T { |
| // SAFETY: the caller must guarantee that `self` meets all the |
| // requirements for a reference. |
| // `cast_const` avoids a mutable raw pointer deref. |
| unsafe { &*self.as_ptr().cast_const() } |
| } |
| |
| /// Returns a unique reference to the value. If the value may be uninitialized, [`as_uninit_mut`] |
| /// must be used instead. |
| /// |
| /// For the shared counterpart see [`as_ref`]. |
| /// |
| /// [`as_uninit_mut`]: NonNull::as_uninit_mut |
| /// [`as_ref`]: NonNull::as_ref |
| /// |
| /// # Safety |
| /// |
| /// When calling this method, you have to ensure that all of the following is true: |
| /// |
| /// * The pointer must be properly aligned. |
| /// |
| /// * It must be "dereferenceable" in the sense defined in [the module documentation]. |
| /// |
| /// * The pointer must point to an initialized instance of `T`. |
| /// |
| /// * You must enforce Rust's aliasing rules, since the returned lifetime `'a` is |
| /// arbitrarily chosen and does not necessarily reflect the actual lifetime of the data. |
| /// In particular, while this reference exists, the memory the pointer points to must |
| /// not get accessed (read or written) through any other pointer. |
| /// |
| /// This applies even if the result of this method is unused! |
| /// (The part about being initialized is not yet fully decided, but until |
| /// it is, the only safe approach is to ensure that they are indeed initialized.) |
| /// # Examples |
| /// |
| /// ``` |
| /// use std::ptr::NonNull; |
| /// |
| /// let mut x = 0u32; |
| /// let mut ptr = NonNull::new(&mut x).expect("null pointer"); |
| /// |
| /// let x_ref = unsafe { ptr.as_mut() }; |
| /// assert_eq!(*x_ref, 0); |
| /// *x_ref += 2; |
| /// assert_eq!(*x_ref, 2); |
| /// ``` |
| /// |
| /// [the module documentation]: crate::ptr#safety |
| #[stable(feature = "nonnull", since = "1.25.0")] |
| #[rustc_const_unstable(feature = "const_ptr_as_ref", issue = "91822")] |
| #[must_use] |
| #[inline(always)] |
| pub const unsafe fn as_mut<'a>(&mut self) -> &'a mut T { |
| // SAFETY: the caller must guarantee that `self` meets all the |
| // requirements for a mutable reference. |
| unsafe { &mut *self.as_ptr() } |
| } |
| |
| /// Casts to a pointer of another type. |
| /// |
| /// # Examples |
| /// |
| /// ``` |
| /// use std::ptr::NonNull; |
| /// |
| /// let mut x = 0u32; |
| /// let ptr = NonNull::new(&mut x as *mut _).expect("null pointer"); |
| /// |
| /// let casted_ptr = ptr.cast::<i8>(); |
| /// let raw_ptr: *mut i8 = casted_ptr.as_ptr(); |
| /// ``` |
| #[stable(feature = "nonnull_cast", since = "1.27.0")] |
| #[rustc_const_stable(feature = "const_nonnull_cast", since = "1.36.0")] |
| #[must_use = "this returns the result of the operation, \ |
| without modifying the original"] |
| #[inline] |
| pub const fn cast<U>(self) -> NonNull<U> { |
| // SAFETY: `self` is a `NonNull` pointer which is necessarily non-null |
| unsafe { NonNull { pointer: self.as_ptr() as *mut U } } |
| } |
| |
| /// Calculates the offset from a pointer. |
| /// |
| /// `count` is in units of T; e.g., a `count` of 3 represents a pointer |
| /// offset of `3 * size_of::<T>()` bytes. |
| /// |
| /// # Safety |
| /// |
| /// If any of the following conditions are violated, the result is Undefined |
| /// Behavior: |
| /// |
| /// * Both the starting and resulting pointer must be either in bounds or one |
| /// byte past the end of the same [allocated object]. |
| /// |
| /// * The computed offset, **in bytes**, cannot overflow an `isize`. |
| /// |
| /// * The offset being in bounds cannot rely on "wrapping around" the address |
| /// space. That is, the infinite-precision sum, **in bytes** must fit in a usize. |
| /// |
| /// The compiler and standard library generally tries to ensure allocations |
| /// never reach a size where an offset is a concern. For instance, `Vec` |
| /// and `Box` ensure they never allocate more than `isize::MAX` bytes, so |
| /// `vec.as_ptr().add(vec.len())` is always safe. |
| /// |
| /// Most platforms fundamentally can't even construct such an allocation. |
| /// For instance, no known 64-bit platform can ever serve a request |
| /// for 2<sup>63</sup> bytes due to page-table limitations or splitting the address space. |
| /// However, some 32-bit and 16-bit platforms may successfully serve a request for |
| /// more than `isize::MAX` bytes with things like Physical Address |
| /// Extension. As such, memory acquired directly from allocators or memory |
| /// mapped files *may* be too large to handle with this function. |
| /// |
| /// [allocated object]: crate::ptr#allocated-object |
| /// |
| /// # Examples |
| /// |
| /// ``` |
| /// #![feature(non_null_convenience)] |
| /// use std::ptr::NonNull; |
| /// |
| /// let mut s = [1, 2, 3]; |
| /// let ptr: NonNull<u32> = NonNull::new(s.as_mut_ptr()).unwrap(); |
| /// |
| /// unsafe { |
| /// println!("{}", ptr.offset(1).read()); |
| /// println!("{}", ptr.offset(2).read()); |
| /// } |
| /// ``` |
| #[unstable(feature = "non_null_convenience", issue = "117691")] |
| #[rustc_const_unstable(feature = "non_null_convenience", issue = "117691")] |
| #[must_use = "returns a new pointer rather than modifying its argument"] |
| #[inline(always)] |
| #[cfg_attr(miri, track_caller)] // even without panics, this helps for Miri backtraces |
| pub const unsafe fn offset(self, count: isize) -> NonNull<T> |
| where |
| T: Sized, |
| { |
| // SAFETY: the caller must uphold the safety contract for `offset`. |
| // Additionally safety contract of `offset` guarantees that the resulting pointer is |
| // pointing to an allocation, there can't be an allocation at null, thus it's safe to |
| // construct `NonNull`. |
| unsafe { NonNull { pointer: intrinsics::offset(self.pointer, count) } } |
| } |
| |
| /// Calculates the offset from a pointer in bytes. |
| /// |
| /// `count` is in units of **bytes**. |
| /// |
| /// This is purely a convenience for casting to a `u8` pointer and |
| /// using [offset][pointer::offset] on it. See that method for documentation |
| /// and safety requirements. |
| /// |
| /// For non-`Sized` pointees this operation changes only the data pointer, |
| /// leaving the metadata untouched. |
| #[unstable(feature = "non_null_convenience", issue = "117691")] |
| #[rustc_const_unstable(feature = "non_null_convenience", issue = "117691")] |
| #[must_use] |
| #[inline(always)] |
| #[cfg_attr(miri, track_caller)] // even without panics, this helps for Miri backtraces |
| pub const unsafe fn byte_offset(self, count: isize) -> Self { |
| // SAFETY: the caller must uphold the safety contract for `offset` and `byte_offset` has |
| // the same safety contract. |
| // Additionally safety contract of `offset` guarantees that the resulting pointer is |
| // pointing to an allocation, there can't be an allocation at null, thus it's safe to |
| // construct `NonNull`. |
| unsafe { NonNull { pointer: self.pointer.byte_offset(count) } } |
| } |
| |
| /// Calculates the offset from a pointer (convenience for `.offset(count as isize)`). |
| /// |
| /// `count` is in units of T; e.g., a `count` of 3 represents a pointer |
| /// offset of `3 * size_of::<T>()` bytes. |
| /// |
| /// # Safety |
| /// |
| /// If any of the following conditions are violated, the result is Undefined |
| /// Behavior: |
| /// |
| /// * Both the starting and resulting pointer must be either in bounds or one |
| /// byte past the end of the same [allocated object]. |
| /// |
| /// * The computed offset, **in bytes**, cannot overflow an `isize`. |
| /// |
| /// * The offset being in bounds cannot rely on "wrapping around" the address |
| /// space. That is, the infinite-precision sum must fit in a `usize`. |
| /// |
| /// The compiler and standard library generally tries to ensure allocations |
| /// never reach a size where an offset is a concern. For instance, `Vec` |
| /// and `Box` ensure they never allocate more than `isize::MAX` bytes, so |
| /// `vec.as_ptr().add(vec.len())` is always safe. |
| /// |
| /// Most platforms fundamentally can't even construct such an allocation. |
| /// For instance, no known 64-bit platform can ever serve a request |
| /// for 2<sup>63</sup> bytes due to page-table limitations or splitting the address space. |
| /// However, some 32-bit and 16-bit platforms may successfully serve a request for |
| /// more than `isize::MAX` bytes with things like Physical Address |
| /// Extension. As such, memory acquired directly from allocators or memory |
| /// mapped files *may* be too large to handle with this function. |
| /// |
| /// [allocated object]: crate::ptr#allocated-object |
| /// |
| /// # Examples |
| /// |
| /// ``` |
| /// #![feature(non_null_convenience)] |
| /// use std::ptr::NonNull; |
| /// |
| /// let s: &str = "123"; |
| /// let ptr: NonNull<u8> = NonNull::new(s.as_ptr().cast_mut()).unwrap(); |
| /// |
| /// unsafe { |
| /// println!("{}", ptr.add(1).read() as char); |
| /// println!("{}", ptr.add(2).read() as char); |
| /// } |
| /// ``` |
| #[unstable(feature = "non_null_convenience", issue = "117691")] |
| #[rustc_const_unstable(feature = "non_null_convenience", issue = "117691")] |
| #[must_use = "returns a new pointer rather than modifying its argument"] |
| #[inline(always)] |
| #[cfg_attr(miri, track_caller)] // even without panics, this helps for Miri backtraces |
| pub const unsafe fn add(self, count: usize) -> Self |
| where |
| T: Sized, |
| { |
| // SAFETY: the caller must uphold the safety contract for `offset`. |
| // Additionally safety contract of `offset` guarantees that the resulting pointer is |
| // pointing to an allocation, there can't be an allocation at null, thus it's safe to |
| // construct `NonNull`. |
| unsafe { NonNull { pointer: intrinsics::offset(self.pointer, count) } } |
| } |
| |
| /// Calculates the offset from a pointer in bytes (convenience for `.byte_offset(count as isize)`). |
| /// |
| /// `count` is in units of bytes. |
| /// |
| /// This is purely a convenience for casting to a `u8` pointer and |
| /// using [`add`][NonNull::add] on it. See that method for documentation |
| /// and safety requirements. |
| /// |
| /// For non-`Sized` pointees this operation changes only the data pointer, |
| /// leaving the metadata untouched. |
| #[unstable(feature = "non_null_convenience", issue = "117691")] |
| #[rustc_const_unstable(feature = "non_null_convenience", issue = "117691")] |
| #[must_use] |
| #[inline(always)] |
| #[rustc_allow_const_fn_unstable(set_ptr_value)] |
| #[cfg_attr(miri, track_caller)] // even without panics, this helps for Miri backtraces |
| pub const unsafe fn byte_add(self, count: usize) -> Self { |
| // SAFETY: the caller must uphold the safety contract for `add` and `byte_add` has the same |
| // safety contract. |
| // Additionally safety contract of `add` guarantees that the resulting pointer is pointing |
| // to an allocation, there can't be an allocation at null, thus it's safe to construct |
| // `NonNull`. |
| unsafe { NonNull { pointer: self.pointer.byte_add(count) } } |
| } |
| |
| /// Calculates the offset from a pointer (convenience for |
| /// `.offset((count as isize).wrapping_neg())`). |
| /// |
| /// `count` is in units of T; e.g., a `count` of 3 represents a pointer |
| /// offset of `3 * size_of::<T>()` bytes. |
| /// |
| /// # Safety |
| /// |
| /// If any of the following conditions are violated, the result is Undefined |
| /// Behavior: |
| /// |
| /// * Both the starting and resulting pointer must be either in bounds or one |
| /// byte past the end of the same [allocated object]. |
| /// |
| /// * The computed offset cannot exceed `isize::MAX` **bytes**. |
| /// |
| /// * The offset being in bounds cannot rely on "wrapping around" the address |
| /// space. That is, the infinite-precision sum must fit in a usize. |
| /// |
| /// The compiler and standard library generally tries to ensure allocations |
| /// never reach a size where an offset is a concern. For instance, `Vec` |
| /// and `Box` ensure they never allocate more than `isize::MAX` bytes, so |
| /// `vec.as_ptr().add(vec.len()).sub(vec.len())` is always safe. |
| /// |
| /// Most platforms fundamentally can't even construct such an allocation. |
| /// For instance, no known 64-bit platform can ever serve a request |
| /// for 2<sup>63</sup> bytes due to page-table limitations or splitting the address space. |
| /// However, some 32-bit and 16-bit platforms may successfully serve a request for |
| /// more than `isize::MAX` bytes with things like Physical Address |
| /// Extension. As such, memory acquired directly from allocators or memory |
| /// mapped files *may* be too large to handle with this function. |
| /// |
| /// [allocated object]: crate::ptr#allocated-object |
| /// |
| /// # Examples |
| /// |
| /// ``` |
| /// #![feature(non_null_convenience)] |
| /// use std::ptr::NonNull; |
| /// |
| /// let s: &str = "123"; |
| /// |
| /// unsafe { |
| /// let end: NonNull<u8> = NonNull::new(s.as_ptr().cast_mut()).unwrap().add(3); |
| /// println!("{}", end.sub(1).read() as char); |
| /// println!("{}", end.sub(2).read() as char); |
| /// } |
| /// ``` |
| #[unstable(feature = "non_null_convenience", issue = "117691")] |
| #[rustc_const_unstable(feature = "non_null_convenience", issue = "117691")] |
| #[must_use = "returns a new pointer rather than modifying its argument"] |
| #[inline(always)] |
| #[cfg_attr(miri, track_caller)] // even without panics, this helps for Miri backtraces |
| pub const unsafe fn sub(self, count: usize) -> Self |
| where |
| T: Sized, |
| { |
| if T::IS_ZST { |
| // Pointer arithmetic does nothing when the pointee is a ZST. |
| self |
| } else { |
| // SAFETY: the caller must uphold the safety contract for `offset`. |
| // Because the pointee is *not* a ZST, that means that `count` is |
| // at most `isize::MAX`, and thus the negation cannot overflow. |
| unsafe { self.offset(intrinsics::unchecked_sub(0, count as isize)) } |
| } |
| } |
| |
| /// Calculates the offset from a pointer in bytes (convenience for |
| /// `.byte_offset((count as isize).wrapping_neg())`). |
| /// |
| /// `count` is in units of bytes. |
| /// |
| /// This is purely a convenience for casting to a `u8` pointer and |
| /// using [`sub`][NonNull::sub] on it. See that method for documentation |
| /// and safety requirements. |
| /// |
| /// For non-`Sized` pointees this operation changes only the data pointer, |
| /// leaving the metadata untouched. |
| #[unstable(feature = "non_null_convenience", issue = "117691")] |
| #[rustc_const_unstable(feature = "non_null_convenience", issue = "117691")] |
| #[must_use] |
| #[inline(always)] |
| #[rustc_allow_const_fn_unstable(set_ptr_value)] |
| #[cfg_attr(miri, track_caller)] // even without panics, this helps for Miri backtraces |
| pub const unsafe fn byte_sub(self, count: usize) -> Self { |
| // SAFETY: the caller must uphold the safety contract for `sub` and `byte_sub` has the same |
| // safety contract. |
| // Additionally safety contract of `sub` guarantees that the resulting pointer is pointing |
| // to an allocation, there can't be an allocation at null, thus it's safe to construct |
| // `NonNull`. |
| unsafe { NonNull { pointer: self.pointer.byte_sub(count) } } |
| } |
| |
| /// Calculates the distance between two pointers. The returned value is in |
| /// units of T: the distance in bytes divided by `mem::size_of::<T>()`. |
| /// |
| /// This is equivalent to `(self as isize - origin as isize) / (mem::size_of::<T>() as isize)`, |
| /// except that it has a lot more opportunities for UB, in exchange for the compiler |
| /// better understanding what you are doing. |
| /// |
| /// The primary motivation of this method is for computing the `len` of an array/slice |
| /// of `T` that you are currently representing as a "start" and "end" pointer |
| /// (and "end" is "one past the end" of the array). |
| /// In that case, `end.offset_from(start)` gets you the length of the array. |
| /// |
| /// All of the following safety requirements are trivially satisfied for this usecase. |
| /// |
| /// [`offset`]: #method.offset |
| /// |
| /// # Safety |
| /// |
| /// If any of the following conditions are violated, the result is Undefined |
| /// Behavior: |
| /// |
| /// * Both `self` and `origin` must be either in bounds or one |
| /// byte past the end of the same [allocated object]. |
| /// |
| /// * Both pointers must be *derived from* a pointer to the same object. |
| /// (See below for an example.) |
| /// |
| /// * The distance between the pointers, in bytes, must be an exact multiple |
| /// of the size of `T`. |
| /// |
| /// * The distance between the pointers, **in bytes**, cannot overflow an `isize`. |
| /// |
| /// * The distance being in bounds cannot rely on "wrapping around" the address space. |
| /// |
| /// Rust types are never larger than `isize::MAX` and Rust allocations never wrap around the |
| /// address space, so two pointers within some value of any Rust type `T` will always satisfy |
| /// the last two conditions. The standard library also generally ensures that allocations |
| /// never reach a size where an offset is a concern. For instance, `Vec` and `Box` ensure they |
| /// never allocate more than `isize::MAX` bytes, so `ptr_into_vec.offset_from(vec.as_ptr())` |
| /// always satisfies the last two conditions. |
| /// |
| /// Most platforms fundamentally can't even construct such a large allocation. |
| /// For instance, no known 64-bit platform can ever serve a request |
| /// for 2<sup>63</sup> bytes due to page-table limitations or splitting the address space. |
| /// However, some 32-bit and 16-bit platforms may successfully serve a request for |
| /// more than `isize::MAX` bytes with things like Physical Address |
| /// Extension. As such, memory acquired directly from allocators or memory |
| /// mapped files *may* be too large to handle with this function. |
| /// (Note that [`offset`] and [`add`] also have a similar limitation and hence cannot be used on |
| /// such large allocations either.) |
| /// |
| /// The requirement for pointers to be derived from the same allocated object is primarily |
| /// needed for `const`-compatibility: the distance between pointers into *different* allocated |
| /// objects is not known at compile-time. However, the requirement also exists at |
| /// runtime and may be exploited by optimizations. If you wish to compute the difference between |
| /// pointers that are not guaranteed to be from the same allocation, use `(self as isize - |
| /// origin as isize) / mem::size_of::<T>()`. |
| // FIXME: recommend `addr()` instead of `as usize` once that is stable. |
| /// |
| /// [`add`]: #method.add |
| /// [allocated object]: crate::ptr#allocated-object |
| /// |
| /// # Panics |
| /// |
| /// This function panics if `T` is a Zero-Sized Type ("ZST"). |
| /// |
| /// # Examples |
| /// |
| /// Basic usage: |
| /// |
| /// ``` |
| /// #![feature(non_null_convenience)] |
| /// use std::ptr::NonNull; |
| /// |
| /// let a = [0; 5]; |
| /// let ptr1: NonNull<u32> = NonNull::from(&a[1]); |
| /// let ptr2: NonNull<u32> = NonNull::from(&a[3]); |
| /// unsafe { |
| /// assert_eq!(ptr2.offset_from(ptr1), 2); |
| /// assert_eq!(ptr1.offset_from(ptr2), -2); |
| /// assert_eq!(ptr1.offset(2), ptr2); |
| /// assert_eq!(ptr2.offset(-2), ptr1); |
| /// } |
| /// ``` |
| /// |
| /// *Incorrect* usage: |
| /// |
| /// ```rust,no_run |
| /// #![feature(non_null_convenience, strict_provenance)] |
| /// use std::ptr::NonNull; |
| /// |
| /// let ptr1 = NonNull::new(Box::into_raw(Box::new(0u8))).unwrap(); |
| /// let ptr2 = NonNull::new(Box::into_raw(Box::new(1u8))).unwrap(); |
| /// let diff = (ptr2.addr().get() as isize).wrapping_sub(ptr1.addr().get() as isize); |
| /// // Make ptr2_other an "alias" of ptr2, but derived from ptr1. |
| /// let ptr2_other = NonNull::new(ptr1.as_ptr().wrapping_byte_offset(diff)).unwrap(); |
| /// assert_eq!(ptr2.addr(), ptr2_other.addr()); |
| /// // Since ptr2_other and ptr2 are derived from pointers to different objects, |
| /// // computing their offset is undefined behavior, even though |
| /// // they point to the same address! |
| /// unsafe { |
| /// let zero = ptr2_other.offset_from(ptr2); // Undefined Behavior |
| /// } |
| /// ``` |
| #[unstable(feature = "non_null_convenience", issue = "117691")] |
| #[rustc_const_unstable(feature = "non_null_convenience", issue = "117691")] |
| #[inline] |
| #[cfg_attr(miri, track_caller)] // even without panics, this helps for Miri backtraces |
| pub const unsafe fn offset_from(self, origin: NonNull<T>) -> isize |
| where |
| T: Sized, |
| { |
| // SAFETY: the caller must uphold the safety contract for `offset_from`. |
| unsafe { self.pointer.offset_from(origin.pointer) } |
| } |
| |
| /// Calculates the distance between two pointers. The returned value is in |
| /// units of **bytes**. |
| /// |
| /// This is purely a convenience for casting to a `u8` pointer and |
| /// using [`offset_from`][NonNull::offset_from] on it. See that method for |
| /// documentation and safety requirements. |
| /// |
| /// For non-`Sized` pointees this operation considers only the data pointers, |
| /// ignoring the metadata. |
| #[unstable(feature = "non_null_convenience", issue = "117691")] |
| #[rustc_const_unstable(feature = "non_null_convenience", issue = "117691")] |
| #[inline(always)] |
| #[cfg_attr(miri, track_caller)] // even without panics, this helps for Miri backtraces |
| pub const unsafe fn byte_offset_from<U: ?Sized>(self, origin: NonNull<U>) -> isize { |
| // SAFETY: the caller must uphold the safety contract for `byte_offset_from`. |
| unsafe { self.pointer.byte_offset_from(origin.pointer) } |
| } |
| |
| // N.B. `wrapping_offset``, `wrapping_add`, etc are not implemented because they can wrap to null |
| |
| /// Calculates the distance between two pointers, *where it's known that |
| /// `self` is equal to or greater than `origin`*. The returned value is in |
| /// units of T: the distance in bytes is divided by `mem::size_of::<T>()`. |
| /// |
| /// This computes the same value that [`offset_from`](#method.offset_from) |
| /// would compute, but with the added precondition that the offset is |
| /// guaranteed to be non-negative. This method is equivalent to |
| /// `usize::try_from(self.offset_from(origin)).unwrap_unchecked()`, |
| /// but it provides slightly more information to the optimizer, which can |
| /// sometimes allow it to optimize slightly better with some backends. |
| /// |
| /// This method can be though of as recovering the `count` that was passed |
| /// to [`add`](#method.add) (or, with the parameters in the other order, |
| /// to [`sub`](#method.sub)). The following are all equivalent, assuming |
| /// that their safety preconditions are met: |
| /// ```rust |
| /// # #![feature(non_null_convenience)] |
| /// # unsafe fn blah(ptr: std::ptr::NonNull<u32>, origin: std::ptr::NonNull<u32>, count: usize) -> bool { |
| /// ptr.sub_ptr(origin) == count |
| /// # && |
| /// origin.add(count) == ptr |
| /// # && |
| /// ptr.sub(count) == origin |
| /// # } |
| /// ``` |
| /// |
| /// # Safety |
| /// |
| /// - The distance between the pointers must be non-negative (`self >= origin`) |
| /// |
| /// - *All* the safety conditions of [`offset_from`](#method.offset_from) |
| /// apply to this method as well; see it for the full details. |
| /// |
| /// Importantly, despite the return type of this method being able to represent |
| /// a larger offset, it's still *not permitted* to pass pointers which differ |
| /// by more than `isize::MAX` *bytes*. As such, the result of this method will |
| /// always be less than or equal to `isize::MAX as usize`. |
| /// |
| /// # Panics |
| /// |
| /// This function panics if `T` is a Zero-Sized Type ("ZST"). |
| /// |
| /// # Examples |
| /// |
| /// ``` |
| /// #![feature(non_null_convenience)] |
| /// use std::ptr::NonNull; |
| /// |
| /// let a = [0; 5]; |
| /// let ptr1: NonNull<u32> = NonNull::from(&a[1]); |
| /// let ptr2: NonNull<u32> = NonNull::from(&a[3]); |
| /// unsafe { |
| /// assert_eq!(ptr2.sub_ptr(ptr1), 2); |
| /// assert_eq!(ptr1.add(2), ptr2); |
| /// assert_eq!(ptr2.sub(2), ptr1); |
| /// assert_eq!(ptr2.sub_ptr(ptr2), 0); |
| /// } |
| /// |
| /// // This would be incorrect, as the pointers are not correctly ordered: |
| /// // ptr1.sub_ptr(ptr2) |
| /// ``` |
| #[unstable(feature = "non_null_convenience", issue = "117691")] |
| #[rustc_const_unstable(feature = "non_null_convenience", issue = "117691")] |
| // #[unstable(feature = "ptr_sub_ptr", issue = "95892")] |
| // #[rustc_const_unstable(feature = "const_ptr_sub_ptr", issue = "95892")] |
| #[inline] |
| #[cfg_attr(miri, track_caller)] // even without panics, this helps for Miri backtraces |
| pub const unsafe fn sub_ptr(self, subtracted: NonNull<T>) -> usize |
| where |
| T: Sized, |
| { |
| // SAFETY: the caller must uphold the safety contract for `sub_ptr`. |
| unsafe { self.pointer.sub_ptr(subtracted.pointer) } |
| } |
| |
| /// Reads the value from `self` without moving it. This leaves the |
| /// memory in `self` unchanged. |
| /// |
| /// See [`ptr::read`] for safety concerns and examples. |
| /// |
| /// [`ptr::read`]: crate::ptr::read() |
| #[unstable(feature = "non_null_convenience", issue = "117691")] |
| #[rustc_const_unstable(feature = "non_null_convenience", issue = "117691")] |
| #[inline] |
| #[cfg_attr(miri, track_caller)] // even without panics, this helps for Miri backtraces |
| pub const unsafe fn read(self) -> T |
| where |
| T: Sized, |
| { |
| // SAFETY: the caller must uphold the safety contract for `read`. |
| unsafe { ptr::read(self.pointer) } |
| } |
| |
| /// Performs a volatile read of the value from `self` without moving it. This |
| /// leaves the memory in `self` unchanged. |
| /// |
| /// Volatile operations are intended to act on I/O memory, and are guaranteed |
| /// to not be elided or reordered by the compiler across other volatile |
| /// operations. |
| /// |
| /// See [`ptr::read_volatile`] for safety concerns and examples. |
| /// |
| /// [`ptr::read_volatile`]: crate::ptr::read_volatile() |
| #[unstable(feature = "non_null_convenience", issue = "117691")] |
| #[inline] |
| #[cfg_attr(miri, track_caller)] // even without panics, this helps for Miri backtraces |
| pub unsafe fn read_volatile(self) -> T |
| where |
| T: Sized, |
| { |
| // SAFETY: the caller must uphold the safety contract for `read_volatile`. |
| unsafe { ptr::read_volatile(self.pointer) } |
| } |
| |
| /// Reads the value from `self` without moving it. This leaves the |
| /// memory in `self` unchanged. |
| /// |
| /// Unlike `read`, the pointer may be unaligned. |
| /// |
| /// See [`ptr::read_unaligned`] for safety concerns and examples. |
| /// |
| /// [`ptr::read_unaligned`]: crate::ptr::read_unaligned() |
| #[unstable(feature = "non_null_convenience", issue = "117691")] |
| #[rustc_const_unstable(feature = "non_null_convenience", issue = "117691")] |
| #[inline] |
| #[cfg_attr(miri, track_caller)] // even without panics, this helps for Miri backtraces |
| pub const unsafe fn read_unaligned(self) -> T |
| where |
| T: Sized, |
| { |
| // SAFETY: the caller must uphold the safety contract for `read_unaligned`. |
| unsafe { ptr::read_unaligned(self.pointer) } |
| } |
| |
| /// Copies `count * size_of<T>` bytes from `self` to `dest`. The source |
| /// and destination may overlap. |
| /// |
| /// NOTE: this has the *same* argument order as [`ptr::copy`]. |
| /// |
| /// See [`ptr::copy`] for safety concerns and examples. |
| /// |
| /// [`ptr::copy`]: crate::ptr::copy() |
| #[unstable(feature = "non_null_convenience", issue = "117691")] |
| #[rustc_const_unstable(feature = "non_null_convenience", issue = "117691")] |
| #[inline(always)] |
| #[cfg_attr(miri, track_caller)] // even without panics, this helps for Miri backtraces |
| pub const unsafe fn copy_to(self, dest: NonNull<T>, count: usize) |
| where |
| T: Sized, |
| { |
| // SAFETY: the caller must uphold the safety contract for `copy`. |
| unsafe { ptr::copy(self.pointer, dest.as_ptr(), count) } |
| } |
| |
| /// Copies `count * size_of<T>` bytes from `self` to `dest`. The source |
| /// and destination may *not* overlap. |
| /// |
| /// NOTE: this has the *same* argument order as [`ptr::copy_nonoverlapping`]. |
| /// |
| /// See [`ptr::copy_nonoverlapping`] for safety concerns and examples. |
| /// |
| /// [`ptr::copy_nonoverlapping`]: crate::ptr::copy_nonoverlapping() |
| #[unstable(feature = "non_null_convenience", issue = "117691")] |
| #[rustc_const_unstable(feature = "non_null_convenience", issue = "117691")] |
| #[inline(always)] |
| #[cfg_attr(miri, track_caller)] // even without panics, this helps for Miri backtraces |
| pub const unsafe fn copy_to_nonoverlapping(self, dest: NonNull<T>, count: usize) |
| where |
| T: Sized, |
| { |
| // SAFETY: the caller must uphold the safety contract for `copy_nonoverlapping`. |
| unsafe { ptr::copy_nonoverlapping(self.pointer, dest.as_ptr(), count) } |
| } |
| |
| /// Copies `count * size_of<T>` bytes from `src` to `self`. The source |
| /// and destination may overlap. |
| /// |
| /// NOTE: this has the *opposite* argument order of [`ptr::copy`]. |
| /// |
| /// See [`ptr::copy`] for safety concerns and examples. |
| /// |
| /// [`ptr::copy`]: crate::ptr::copy() |
| #[unstable(feature = "non_null_convenience", issue = "117691")] |
| #[rustc_const_unstable(feature = "non_null_convenience", issue = "117691")] |
| #[inline(always)] |
| #[cfg_attr(miri, track_caller)] // even without panics, this helps for Miri backtraces |
| pub const unsafe fn copy_from(self, src: NonNull<T>, count: usize) |
| where |
| T: Sized, |
| { |
| // SAFETY: the caller must uphold the safety contract for `copy`. |
| unsafe { ptr::copy(src.pointer, self.as_ptr(), count) } |
| } |
| |
| /// Copies `count * size_of<T>` bytes from `src` to `self`. The source |
| /// and destination may *not* overlap. |
| /// |
| /// NOTE: this has the *opposite* argument order of [`ptr::copy_nonoverlapping`]. |
| /// |
| /// See [`ptr::copy_nonoverlapping`] for safety concerns and examples. |
| /// |
| /// [`ptr::copy_nonoverlapping`]: crate::ptr::copy_nonoverlapping() |
| #[unstable(feature = "non_null_convenience", issue = "117691")] |
| #[rustc_const_unstable(feature = "non_null_convenience", issue = "117691")] |
| #[inline(always)] |
| #[cfg_attr(miri, track_caller)] // even without panics, this helps for Miri backtraces |
| pub const unsafe fn copy_from_nonoverlapping(self, src: NonNull<T>, count: usize) |
| where |
| T: Sized, |
| { |
| // SAFETY: the caller must uphold the safety contract for `copy_nonoverlapping`. |
| unsafe { ptr::copy_nonoverlapping(src.pointer, self.as_ptr(), count) } |
| } |
| |
| /// Executes the destructor (if any) of the pointed-to value. |
| /// |
| /// See [`ptr::drop_in_place`] for safety concerns and examples. |
| /// |
| /// [`ptr::drop_in_place`]: crate::ptr::drop_in_place() |
| #[unstable(feature = "non_null_convenience", issue = "117691")] |
| #[inline(always)] |
| pub unsafe fn drop_in_place(self) { |
| // SAFETY: the caller must uphold the safety contract for `drop_in_place`. |
| unsafe { ptr::drop_in_place(self.as_ptr()) } |
| } |
| |
| /// Overwrites a memory location with the given value without reading or |
| /// dropping the old value. |
| /// |
| /// See [`ptr::write`] for safety concerns and examples. |
| /// |
| /// [`ptr::write`]: crate::ptr::write() |
| #[unstable(feature = "non_null_convenience", issue = "117691")] |
| #[rustc_const_unstable(feature = "non_null_convenience", issue = "117691")] |
| //#[rustc_const_unstable(feature = "const_ptr_write", issue = "86302")] |
| #[inline(always)] |
| #[cfg_attr(miri, track_caller)] // even without panics, this helps for Miri backtraces |
| pub const unsafe fn write(self, val: T) |
| where |
| T: Sized, |
| { |
| // SAFETY: the caller must uphold the safety contract for `write`. |
| unsafe { ptr::write(self.as_ptr(), val) } |
| } |
| |
| /// Invokes memset on the specified pointer, setting `count * size_of::<T>()` |
| /// bytes of memory starting at `self` to `val`. |
| /// |
| /// See [`ptr::write_bytes`] for safety concerns and examples. |
| /// |
| /// [`ptr::write_bytes`]: crate::ptr::write_bytes() |
| #[doc(alias = "memset")] |
| #[unstable(feature = "non_null_convenience", issue = "117691")] |
| #[rustc_const_unstable(feature = "non_null_convenience", issue = "117691")] |
| //#[rustc_const_unstable(feature = "const_ptr_write", issue = "86302")] |
| #[inline(always)] |
| #[cfg_attr(miri, track_caller)] // even without panics, this helps for Miri backtraces |
| pub const unsafe fn write_bytes(self, val: u8, count: usize) |
| where |
| T: Sized, |
| { |
| // SAFETY: the caller must uphold the safety contract for `write_bytes`. |
| unsafe { ptr::write_bytes(self.as_ptr(), val, count) } |
| } |
| |
| /// Performs a volatile write of a memory location with the given value without |
| /// reading or dropping the old value. |
| /// |
| /// Volatile operations are intended to act on I/O memory, and are guaranteed |
| /// to not be elided or reordered by the compiler across other volatile |
| /// operations. |
| /// |
| /// See [`ptr::write_volatile`] for safety concerns and examples. |
| /// |
| /// [`ptr::write_volatile`]: crate::ptr::write_volatile() |
| #[unstable(feature = "non_null_convenience", issue = "117691")] |
| #[inline(always)] |
| #[cfg_attr(miri, track_caller)] // even without panics, this helps for Miri backtraces |
| pub unsafe fn write_volatile(self, val: T) |
| where |
| T: Sized, |
| { |
| // SAFETY: the caller must uphold the safety contract for `write_volatile`. |
| unsafe { ptr::write_volatile(self.as_ptr(), val) } |
| } |
| |
| /// Overwrites a memory location with the given value without reading or |
| /// dropping the old value. |
| /// |
| /// Unlike `write`, the pointer may be unaligned. |
| /// |
| /// See [`ptr::write_unaligned`] for safety concerns and examples. |
| /// |
| /// [`ptr::write_unaligned`]: crate::ptr::write_unaligned() |
| #[unstable(feature = "non_null_convenience", issue = "117691")] |
| #[rustc_const_unstable(feature = "non_null_convenience", issue = "117691")] |
| //#[rustc_const_unstable(feature = "const_ptr_write", issue = "86302")] |
| #[inline(always)] |
| #[cfg_attr(miri, track_caller)] // even without panics, this helps for Miri backtraces |
| pub const unsafe fn write_unaligned(self, val: T) |
| where |
| T: Sized, |
| { |
| // SAFETY: the caller must uphold the safety contract for `write_unaligned`. |
| unsafe { ptr::write_unaligned(self.as_ptr(), val) } |
| } |
| |
| /// Replaces the value at `self` with `src`, returning the old |
| /// value, without dropping either. |
| /// |
| /// See [`ptr::replace`] for safety concerns and examples. |
| /// |
| /// [`ptr::replace`]: crate::ptr::replace() |
| #[unstable(feature = "non_null_convenience", issue = "117691")] |
| #[inline(always)] |
| pub unsafe fn replace(self, src: T) -> T |
| where |
| T: Sized, |
| { |
| // SAFETY: the caller must uphold the safety contract for `replace`. |
| unsafe { ptr::replace(self.as_ptr(), src) } |
| } |
| |
| /// Swaps the values at two mutable locations of the same type, without |
| /// deinitializing either. They may overlap, unlike `mem::swap` which is |
| /// otherwise equivalent. |
| /// |
| /// See [`ptr::swap`] for safety concerns and examples. |
| /// |
| /// [`ptr::swap`]: crate::ptr::swap() |
| #[unstable(feature = "non_null_convenience", issue = "117691")] |
| #[rustc_const_unstable(feature = "non_null_convenience", issue = "117691")] |
| //#[rustc_const_unstable(feature = "const_swap", issue = "83163")] |
| #[inline(always)] |
| pub const unsafe fn swap(self, with: NonNull<T>) |
| where |
| T: Sized, |
| { |
| // SAFETY: the caller must uphold the safety contract for `swap`. |
| unsafe { ptr::swap(self.as_ptr(), with.as_ptr()) } |
| } |
| |
| /// Computes the offset that needs to be applied to the pointer in order to make it aligned to |
| /// `align`. |
| /// |
| /// If it is not possible to align the pointer, the implementation returns |
| /// `usize::MAX`. It is permissible for the implementation to *always* |
| /// return `usize::MAX`. Only your algorithm's performance can depend |
| /// on getting a usable offset here, not its correctness. |
| /// |
| /// The offset is expressed in number of `T` elements, and not bytes. |
| /// |
| /// There are no guarantees whatsoever that offsetting the pointer will not overflow or go |
| /// beyond the allocation that the pointer points into. It is up to the caller to ensure that |
| /// the returned offset is correct in all terms other than alignment. |
| /// |
| /// # Panics |
| /// |
| /// The function panics if `align` is not a power-of-two. |
| /// |
| /// # Examples |
| /// |
| /// Accessing adjacent `u8` as `u16` |
| /// |
| /// ``` |
| /// #![feature(non_null_convenience)] |
| /// use std::mem::align_of; |
| /// use std::ptr::NonNull; |
| /// |
| /// # unsafe { |
| /// let x = [5_u8, 6, 7, 8, 9]; |
| /// let ptr = NonNull::new(x.as_ptr() as *mut u8).unwrap(); |
| /// let offset = ptr.align_offset(align_of::<u16>()); |
| /// |
| /// if offset < x.len() - 1 { |
| /// let u16_ptr = ptr.add(offset).cast::<u16>(); |
| /// assert!(u16_ptr.read() == u16::from_ne_bytes([5, 6]) || u16_ptr.read() == u16::from_ne_bytes([6, 7])); |
| /// } else { |
| /// // while the pointer can be aligned via `offset`, it would point |
| /// // outside the allocation |
| /// } |
| /// # } |
| /// ``` |
| #[unstable(feature = "non_null_convenience", issue = "117691")] |
| #[rustc_const_unstable(feature = "non_null_convenience", issue = "117691")] |
| //#[rustc_const_unstable(feature = "const_align_offset", issue = "90962")] |
| #[must_use] |
| #[inline] |
| pub const fn align_offset(self, align: usize) -> usize |
| where |
| T: Sized, |
| { |
| if !align.is_power_of_two() { |
| panic!("align_offset: align is not a power-of-two"); |
| } |
| |
| { |
| // SAFETY: `align` has been checked to be a power of 2 above. |
| unsafe { ptr::align_offset(self.pointer, align) } |
| } |
| } |
| |
| /// Returns whether the pointer is properly aligned for `T`. |
| /// |
| /// # Examples |
| /// |
| /// ``` |
| /// use std::ptr::NonNull; |
| /// |
| /// // On some platforms, the alignment of i32 is less than 4. |
| /// #[repr(align(4))] |
| /// struct AlignedI32(i32); |
| /// |
| /// let data = AlignedI32(42); |
| /// let ptr = NonNull::<AlignedI32>::from(&data); |
| /// |
| /// assert!(ptr.is_aligned()); |
| /// assert!(!NonNull::new(ptr.as_ptr().wrapping_byte_add(1)).unwrap().is_aligned()); |
| /// ``` |
| /// |
| /// # At compiletime |
| /// **Note: Alignment at compiletime is experimental and subject to change. See the |
| /// [tracking issue] for details.** |
| /// |
| /// At compiletime, the compiler may not know where a value will end up in memory. |
| /// Calling this function on a pointer created from a reference at compiletime will only |
| /// return `true` if the pointer is guaranteed to be aligned. This means that the pointer |
| /// is never aligned if cast to a type with a stricter alignment than the reference's |
| /// underlying allocation. |
| /// |
| /// ``` |
| /// #![feature(const_pointer_is_aligned)] |
| /// #![feature(non_null_convenience)] |
| /// #![feature(const_option)] |
| /// #![feature(const_nonnull_new)] |
| /// use std::ptr::NonNull; |
| /// |
| /// // On some platforms, the alignment of primitives is less than their size. |
| /// #[repr(align(4))] |
| /// struct AlignedI32(i32); |
| /// #[repr(align(8))] |
| /// struct AlignedI64(i64); |
| /// |
| /// const _: () = { |
| /// let data = [AlignedI32(42), AlignedI32(42)]; |
| /// let ptr = NonNull::<AlignedI32>::new(&data[0] as *const _ as *mut _).unwrap(); |
| /// assert!(ptr.is_aligned()); |
| /// |
| /// // At runtime either `ptr1` or `ptr2` would be aligned, but at compiletime neither is aligned. |
| /// let ptr1 = ptr.cast::<AlignedI64>(); |
| /// let ptr2 = unsafe { ptr.add(1).cast::<AlignedI64>() }; |
| /// assert!(!ptr1.is_aligned()); |
| /// assert!(!ptr2.is_aligned()); |
| /// }; |
| /// ``` |
| /// |
| /// Due to this behavior, it is possible that a runtime pointer derived from a compiletime |
| /// pointer is aligned, even if the compiletime pointer wasn't aligned. |
| /// |
| /// ``` |
| /// #![feature(const_pointer_is_aligned)] |
| /// |
| /// // On some platforms, the alignment of primitives is less than their size. |
| /// #[repr(align(4))] |
| /// struct AlignedI32(i32); |
| /// #[repr(align(8))] |
| /// struct AlignedI64(i64); |
| /// |
| /// // At compiletime, neither `COMPTIME_PTR` nor `COMPTIME_PTR + 1` is aligned. |
| /// const COMPTIME_PTR: *const AlignedI32 = &AlignedI32(42); |
| /// const _: () = assert!(!COMPTIME_PTR.cast::<AlignedI64>().is_aligned()); |
| /// const _: () = assert!(!COMPTIME_PTR.wrapping_add(1).cast::<AlignedI64>().is_aligned()); |
| /// |
| /// // At runtime, either `runtime_ptr` or `runtime_ptr + 1` is aligned. |
| /// let runtime_ptr = COMPTIME_PTR; |
| /// assert_ne!( |
| /// runtime_ptr.cast::<AlignedI64>().is_aligned(), |
| /// runtime_ptr.wrapping_add(1).cast::<AlignedI64>().is_aligned(), |
| /// ); |
| /// ``` |
| /// |
| /// If a pointer is created from a fixed address, this function behaves the same during |
| /// runtime and compiletime. |
| /// |
| /// ``` |
| /// #![feature(const_pointer_is_aligned)] |
| /// #![feature(const_option)] |
| /// #![feature(const_nonnull_new)] |
| /// use std::ptr::NonNull; |
| /// |
| /// // On some platforms, the alignment of primitives is less than their size. |
| /// #[repr(align(4))] |
| /// struct AlignedI32(i32); |
| /// #[repr(align(8))] |
| /// struct AlignedI64(i64); |
| /// |
| /// const _: () = { |
| /// let ptr = NonNull::new(40 as *mut AlignedI32).unwrap(); |
| /// assert!(ptr.is_aligned()); |
| /// |
| /// // For pointers with a known address, runtime and compiletime behavior are identical. |
| /// let ptr1 = ptr.cast::<AlignedI64>(); |
| /// let ptr2 = NonNull::new(ptr.as_ptr().wrapping_add(1)).unwrap().cast::<AlignedI64>(); |
| /// assert!(ptr1.is_aligned()); |
| /// assert!(!ptr2.is_aligned()); |
| /// }; |
| /// ``` |
| /// |
| /// [tracking issue]: https://github.com/rust-lang/rust/issues/104203 |
| #[stable(feature = "pointer_is_aligned", since = "1.79.0")] |
| #[rustc_const_unstable(feature = "const_pointer_is_aligned", issue = "104203")] |
| #[must_use] |
| #[inline] |
| pub const fn is_aligned(self) -> bool |
| where |
| T: Sized, |
| { |
| self.pointer.is_aligned() |
| } |
| |
| /// Returns whether the pointer is aligned to `align`. |
| /// |
| /// For non-`Sized` pointees this operation considers only the data pointer, |
| /// ignoring the metadata. |
| /// |
| /// # Panics |
| /// |
| /// The function panics if `align` is not a power-of-two (this includes 0). |
| /// |
| /// # Examples |
| /// |
| /// ``` |
| /// #![feature(pointer_is_aligned_to)] |
| /// |
| /// // On some platforms, the alignment of i32 is less than 4. |
| /// #[repr(align(4))] |
| /// struct AlignedI32(i32); |
| /// |
| /// let data = AlignedI32(42); |
| /// let ptr = &data as *const AlignedI32; |
| /// |
| /// assert!(ptr.is_aligned_to(1)); |
| /// assert!(ptr.is_aligned_to(2)); |
| /// assert!(ptr.is_aligned_to(4)); |
| /// |
| /// assert!(ptr.wrapping_byte_add(2).is_aligned_to(2)); |
| /// assert!(!ptr.wrapping_byte_add(2).is_aligned_to(4)); |
| /// |
| /// assert_ne!(ptr.is_aligned_to(8), ptr.wrapping_add(1).is_aligned_to(8)); |
| /// ``` |
| /// |
| /// # At compiletime |
| /// **Note: Alignment at compiletime is experimental and subject to change. See the |
| /// [tracking issue] for details.** |
| /// |
| /// At compiletime, the compiler may not know where a value will end up in memory. |
| /// Calling this function on a pointer created from a reference at compiletime will only |
| /// return `true` if the pointer is guaranteed to be aligned. This means that the pointer |
| /// cannot be stricter aligned than the reference's underlying allocation. |
| /// |
| /// ``` |
| /// #![feature(pointer_is_aligned_to)] |
| /// #![feature(const_pointer_is_aligned)] |
| /// |
| /// // On some platforms, the alignment of i32 is less than 4. |
| /// #[repr(align(4))] |
| /// struct AlignedI32(i32); |
| /// |
| /// const _: () = { |
| /// let data = AlignedI32(42); |
| /// let ptr = &data as *const AlignedI32; |
| /// |
| /// assert!(ptr.is_aligned_to(1)); |
| /// assert!(ptr.is_aligned_to(2)); |
| /// assert!(ptr.is_aligned_to(4)); |
| /// |
| /// // At compiletime, we know for sure that the pointer isn't aligned to 8. |
| /// assert!(!ptr.is_aligned_to(8)); |
| /// assert!(!ptr.wrapping_add(1).is_aligned_to(8)); |
| /// }; |
| /// ``` |
| /// |
| /// Due to this behavior, it is possible that a runtime pointer derived from a compiletime |
| /// pointer is aligned, even if the compiletime pointer wasn't aligned. |
| /// |
| /// ``` |
| /// #![feature(pointer_is_aligned_to)] |
| /// #![feature(const_pointer_is_aligned)] |
| /// |
| /// // On some platforms, the alignment of i32 is less than 4. |
| /// #[repr(align(4))] |
| /// struct AlignedI32(i32); |
| /// |
| /// // At compiletime, neither `COMPTIME_PTR` nor `COMPTIME_PTR + 1` is aligned. |
| /// const COMPTIME_PTR: *const AlignedI32 = &AlignedI32(42); |
| /// const _: () = assert!(!COMPTIME_PTR.is_aligned_to(8)); |
| /// const _: () = assert!(!COMPTIME_PTR.wrapping_add(1).is_aligned_to(8)); |
| /// |
| /// // At runtime, either `runtime_ptr` or `runtime_ptr + 1` is aligned. |
| /// let runtime_ptr = COMPTIME_PTR; |
| /// assert_ne!( |
| /// runtime_ptr.is_aligned_to(8), |
| /// runtime_ptr.wrapping_add(1).is_aligned_to(8), |
| /// ); |
| /// ``` |
| /// |
| /// If a pointer is created from a fixed address, this function behaves the same during |
| /// runtime and compiletime. |
| /// |
| /// ``` |
| /// #![feature(pointer_is_aligned_to)] |
| /// #![feature(const_pointer_is_aligned)] |
| /// |
| /// const _: () = { |
| /// let ptr = 40 as *const u8; |
| /// assert!(ptr.is_aligned_to(1)); |
| /// assert!(ptr.is_aligned_to(2)); |
| /// assert!(ptr.is_aligned_to(4)); |
| /// assert!(ptr.is_aligned_to(8)); |
| /// assert!(!ptr.is_aligned_to(16)); |
| /// }; |
| /// ``` |
| /// |
| /// [tracking issue]: https://github.com/rust-lang/rust/issues/104203 |
| #[unstable(feature = "pointer_is_aligned_to", issue = "96284")] |
| #[rustc_const_unstable(feature = "const_pointer_is_aligned", issue = "104203")] |
| #[must_use] |
| #[inline] |
| pub const fn is_aligned_to(self, align: usize) -> bool { |
| self.pointer.is_aligned_to(align) |
| } |
| } |
| |
| impl<T> NonNull<[T]> { |
| /// Creates a non-null raw slice from a thin pointer and a length. |
| /// |
| /// The `len` argument is the number of **elements**, not the number of bytes. |
| /// |
| /// This function is safe, but dereferencing the return value is unsafe. |
| /// See the documentation of [`slice::from_raw_parts`] for slice safety requirements. |
| /// |
| /// # Examples |
| /// |
| /// ```rust |
| /// use std::ptr::NonNull; |
| /// |
| /// // create a slice pointer when starting out with a pointer to the first element |
| /// let mut x = [5, 6, 7]; |
| /// let nonnull_pointer = NonNull::new(x.as_mut_ptr()).unwrap(); |
| /// let slice = NonNull::slice_from_raw_parts(nonnull_pointer, 3); |
| /// assert_eq!(unsafe { slice.as_ref()[2] }, 7); |
| /// ``` |
| /// |
| /// (Note that this example artificially demonstrates a use of this method, |
| /// but `let slice = NonNull::from(&x[..]);` would be a better way to write code like this.) |
| #[stable(feature = "nonnull_slice_from_raw_parts", since = "1.70.0")] |
| #[rustc_const_unstable(feature = "const_slice_from_raw_parts_mut", issue = "67456")] |
| #[must_use] |
| #[inline] |
| pub const fn slice_from_raw_parts(data: NonNull<T>, len: usize) -> Self { |
| // SAFETY: `data` is a `NonNull` pointer which is necessarily non-null |
| unsafe { Self::new_unchecked(super::slice_from_raw_parts_mut(data.as_ptr(), len)) } |
| } |
| |
| /// Returns the length of a non-null raw slice. |
| /// |
| /// The returned value is the number of **elements**, not the number of bytes. |
| /// |
| /// This function is safe, even when the non-null raw slice cannot be dereferenced to a slice |
| /// because the pointer does not have a valid address. |
| /// |
| /// # Examples |
| /// |
| /// ```rust |
| /// use std::ptr::NonNull; |
| /// |
| /// let slice: NonNull<[i8]> = NonNull::slice_from_raw_parts(NonNull::dangling(), 3); |
| /// assert_eq!(slice.len(), 3); |
| /// ``` |
| #[stable(feature = "slice_ptr_len_nonnull", since = "1.63.0")] |
| #[rustc_const_stable(feature = "const_slice_ptr_len_nonnull", since = "1.63.0")] |
| #[must_use] |
| #[inline] |
| pub const fn len(self) -> usize { |
| self.as_ptr().len() |
| } |
| |
| /// Returns `true` if the non-null raw slice has a length of 0. |
| /// |
| /// # Examples |
| /// |
| /// ```rust |
| /// use std::ptr::NonNull; |
| /// |
| /// let slice: NonNull<[i8]> = NonNull::slice_from_raw_parts(NonNull::dangling(), 3); |
| /// assert!(!slice.is_empty()); |
| /// ``` |
| #[stable(feature = "slice_ptr_is_empty_nonnull", since = "1.79.0")] |
| #[rustc_const_stable( |
| feature = "const_slice_ptr_is_empty_nonnull", |
| since = "1.79.0" |
| )] |
| #[must_use] |
| #[inline] |
| pub const fn is_empty(self) -> bool { |
| self.len() == 0 |
| } |
| |
| /// Returns a non-null pointer to the slice's buffer. |
| /// |
| /// # Examples |
| /// |
| /// ```rust |
| /// #![feature(slice_ptr_get)] |
| /// use std::ptr::NonNull; |
| /// |
| /// let slice: NonNull<[i8]> = NonNull::slice_from_raw_parts(NonNull::dangling(), 3); |
| /// assert_eq!(slice.as_non_null_ptr(), NonNull::<i8>::dangling()); |
| /// ``` |
| #[inline] |
| #[must_use] |
| #[unstable(feature = "slice_ptr_get", issue = "74265")] |
| #[rustc_const_unstable(feature = "slice_ptr_get", issue = "74265")] |
| pub const fn as_non_null_ptr(self) -> NonNull<T> { |
| self.cast() |
| } |
| |
| /// Returns a raw pointer to the slice's buffer. |
| /// |
| /// # Examples |
| /// |
| /// ```rust |
| /// #![feature(slice_ptr_get)] |
| /// use std::ptr::NonNull; |
| /// |
| /// let slice: NonNull<[i8]> = NonNull::slice_from_raw_parts(NonNull::dangling(), 3); |
| /// assert_eq!(slice.as_mut_ptr(), NonNull::<i8>::dangling().as_ptr()); |
| /// ``` |
| #[inline] |
| #[must_use] |
| #[unstable(feature = "slice_ptr_get", issue = "74265")] |
| #[rustc_const_unstable(feature = "slice_ptr_get", issue = "74265")] |
| #[rustc_never_returns_null_ptr] |
| pub const fn as_mut_ptr(self) -> *mut T { |
| self.as_non_null_ptr().as_ptr() |
| } |
| |
| /// Returns a shared reference to a slice of possibly uninitialized values. In contrast to |
| /// [`as_ref`], this does not require that the value has to be initialized. |
| /// |
| /// For the mutable counterpart see [`as_uninit_slice_mut`]. |
| /// |
| /// [`as_ref`]: NonNull::as_ref |
| /// [`as_uninit_slice_mut`]: NonNull::as_uninit_slice_mut |
| /// |
| /// # Safety |
| /// |
| /// When calling this method, you have to ensure that all of the following is true: |
| /// |
| /// * The pointer must be [valid] for reads for `ptr.len() * mem::size_of::<T>()` many bytes, |
| /// and it must be properly aligned. This means in particular: |
| /// |
| /// * The entire memory range of this slice must be contained within a single allocated object! |
| /// Slices can never span across multiple allocated objects. |
| /// |
| /// * The pointer must be aligned even for zero-length slices. One |
| /// reason for this is that enum layout optimizations may rely on references |
| /// (including slices of any length) being aligned and non-null to distinguish |
| /// them from other data. You can obtain a pointer that is usable as `data` |
| /// for zero-length slices using [`NonNull::dangling()`]. |
| /// |
| /// * The total size `ptr.len() * mem::size_of::<T>()` of the slice must be no larger than `isize::MAX`. |
| /// See the safety documentation of [`pointer::offset`]. |
| /// |
| /// * You must enforce Rust's aliasing rules, since the returned lifetime `'a` is |
| /// arbitrarily chosen and does not necessarily reflect the actual lifetime of the data. |
| /// In particular, while this reference exists, the memory the pointer points to must |
| /// not get mutated (except inside `UnsafeCell`). |
| /// |
| /// This applies even if the result of this method is unused! |
| /// |
| /// See also [`slice::from_raw_parts`]. |
| /// |
| /// [valid]: crate::ptr#safety |
| #[inline] |
| #[must_use] |
| #[unstable(feature = "ptr_as_uninit", issue = "75402")] |
| #[rustc_const_unstable(feature = "const_ptr_as_ref", issue = "91822")] |
| pub const unsafe fn as_uninit_slice<'a>(self) -> &'a [MaybeUninit<T>] { |
| // SAFETY: the caller must uphold the safety contract for `as_uninit_slice`. |
| unsafe { slice::from_raw_parts(self.cast().as_ptr(), self.len()) } |
| } |
| |
| /// Returns a unique reference to a slice of possibly uninitialized values. In contrast to |
| /// [`as_mut`], this does not require that the value has to be initialized. |
| /// |
| /// For the shared counterpart see [`as_uninit_slice`]. |
| /// |
| /// [`as_mut`]: NonNull::as_mut |
| /// [`as_uninit_slice`]: NonNull::as_uninit_slice |
| /// |
| /// # Safety |
| /// |
| /// When calling this method, you have to ensure that all of the following is true: |
| /// |
| /// * The pointer must be [valid] for reads and writes for `ptr.len() * mem::size_of::<T>()` |
| /// many bytes, and it must be properly aligned. This means in particular: |
| /// |
| /// * The entire memory range of this slice must be contained within a single allocated object! |
| /// Slices can never span across multiple allocated objects. |
| /// |
| /// * The pointer must be aligned even for zero-length slices. One |
| /// reason for this is that enum layout optimizations may rely on references |
| /// (including slices of any length) being aligned and non-null to distinguish |
| /// them from other data. You can obtain a pointer that is usable as `data` |
| /// for zero-length slices using [`NonNull::dangling()`]. |
| /// |
| /// * The total size `ptr.len() * mem::size_of::<T>()` of the slice must be no larger than `isize::MAX`. |
| /// See the safety documentation of [`pointer::offset`]. |
| /// |
| /// * You must enforce Rust's aliasing rules, since the returned lifetime `'a` is |
| /// arbitrarily chosen and does not necessarily reflect the actual lifetime of the data. |
| /// In particular, while this reference exists, the memory the pointer points to must |
| /// not get accessed (read or written) through any other pointer. |
| /// |
| /// This applies even if the result of this method is unused! |
| /// |
| /// See also [`slice::from_raw_parts_mut`]. |
| /// |
| /// [valid]: crate::ptr#safety |
| /// |
| /// # Examples |
| /// |
| /// ```rust |
| /// #![feature(allocator_api, ptr_as_uninit)] |
| /// |
| /// use std::alloc::{Allocator, Layout, Global}; |
| /// use std::mem::MaybeUninit; |
| /// use std::ptr::NonNull; |
| /// |
| /// let memory: NonNull<[u8]> = Global.allocate(Layout::new::<[u8; 32]>())?; |
| /// // This is safe as `memory` is valid for reads and writes for `memory.len()` many bytes. |
| /// // Note that calling `memory.as_mut()` is not allowed here as the content may be uninitialized. |
| /// # #[allow(unused_variables)] |
| /// let slice: &mut [MaybeUninit<u8>] = unsafe { memory.as_uninit_slice_mut() }; |
| /// # Ok::<_, std::alloc::AllocError>(()) |
| /// ``` |
| #[inline] |
| #[must_use] |
| #[unstable(feature = "ptr_as_uninit", issue = "75402")] |
| #[rustc_const_unstable(feature = "const_ptr_as_ref", issue = "91822")] |
| pub const unsafe fn as_uninit_slice_mut<'a>(self) -> &'a mut [MaybeUninit<T>] { |
| // SAFETY: the caller must uphold the safety contract for `as_uninit_slice_mut`. |
| unsafe { slice::from_raw_parts_mut(self.cast().as_ptr(), self.len()) } |
| } |
| |
| /// Returns a raw pointer to an element or subslice, without doing bounds |
| /// checking. |
| /// |
| /// Calling this method with an out-of-bounds index or when `self` is not dereferenceable |
| /// is *[undefined behavior]* even if the resulting pointer is not used. |
| /// |
| /// [undefined behavior]: https://doc.rust-lang.org/reference/behavior-considered-undefined.html |
| /// |
| /// # Examples |
| /// |
| /// ``` |
| /// #![feature(slice_ptr_get)] |
| /// use std::ptr::NonNull; |
| /// |
| /// let x = &mut [1, 2, 4]; |
| /// let x = NonNull::slice_from_raw_parts(NonNull::new(x.as_mut_ptr()).unwrap(), x.len()); |
| /// |
| /// unsafe { |
| /// assert_eq!(x.get_unchecked_mut(1).as_ptr(), x.as_non_null_ptr().as_ptr().add(1)); |
| /// } |
| /// ``` |
| #[unstable(feature = "slice_ptr_get", issue = "74265")] |
| #[inline] |
| pub unsafe fn get_unchecked_mut<I>(self, index: I) -> NonNull<I::Output> |
| where |
| I: SliceIndex<[T]>, |
| { |
| // SAFETY: the caller ensures that `self` is dereferenceable and `index` in-bounds. |
| // As a consequence, the resulting pointer cannot be null. |
| unsafe { NonNull::new_unchecked(self.as_ptr().get_unchecked_mut(index)) } |
| } |
| } |
| |
| #[stable(feature = "nonnull", since = "1.25.0")] |
| impl<T: ?Sized> Clone for NonNull<T> { |
| #[inline(always)] |
| fn clone(&self) -> Self { |
| *self |
| } |
| } |
| |
| #[stable(feature = "nonnull", since = "1.25.0")] |
| impl<T: ?Sized> Copy for NonNull<T> {} |
| |
| #[unstable(feature = "coerce_unsized", issue = "18598")] |
| impl<T: ?Sized, U: ?Sized> CoerceUnsized<NonNull<U>> for NonNull<T> where T: Unsize<U> {} |
| |
| #[unstable(feature = "dispatch_from_dyn", issue = "none")] |
| impl<T: ?Sized, U: ?Sized> DispatchFromDyn<NonNull<U>> for NonNull<T> where T: Unsize<U> {} |
| |
| #[stable(feature = "nonnull", since = "1.25.0")] |
| impl<T: ?Sized> fmt::Debug for NonNull<T> { |
| fn fmt(&self, f: &mut fmt::Formatter<'_>) -> fmt::Result { |
| fmt::Pointer::fmt(&self.as_ptr(), f) |
| } |
| } |
| |
| #[stable(feature = "nonnull", since = "1.25.0")] |
| impl<T: ?Sized> fmt::Pointer for NonNull<T> { |
| fn fmt(&self, f: &mut fmt::Formatter<'_>) -> fmt::Result { |
| fmt::Pointer::fmt(&self.as_ptr(), f) |
| } |
| } |
| |
| #[stable(feature = "nonnull", since = "1.25.0")] |
| impl<T: ?Sized> Eq for NonNull<T> {} |
| |
| #[stable(feature = "nonnull", since = "1.25.0")] |
| impl<T: ?Sized> PartialEq for NonNull<T> { |
| #[inline] |
| #[allow(ambiguous_wide_pointer_comparisons)] |
| fn eq(&self, other: &Self) -> bool { |
| self.as_ptr() == other.as_ptr() |
| } |
| } |
| |
| #[stable(feature = "nonnull", since = "1.25.0")] |
| impl<T: ?Sized> Ord for NonNull<T> { |
| #[inline] |
| #[allow(ambiguous_wide_pointer_comparisons)] |
| fn cmp(&self, other: &Self) -> Ordering { |
| self.as_ptr().cmp(&other.as_ptr()) |
| } |
| } |
| |
| #[stable(feature = "nonnull", since = "1.25.0")] |
| impl<T: ?Sized> PartialOrd for NonNull<T> { |
| #[inline] |
| #[allow(ambiguous_wide_pointer_comparisons)] |
| fn partial_cmp(&self, other: &Self) -> Option<Ordering> { |
| self.as_ptr().partial_cmp(&other.as_ptr()) |
| } |
| } |
| |
| #[stable(feature = "nonnull", since = "1.25.0")] |
| impl<T: ?Sized> hash::Hash for NonNull<T> { |
| #[inline] |
| fn hash<H: hash::Hasher>(&self, state: &mut H) { |
| self.as_ptr().hash(state) |
| } |
| } |
| |
| #[unstable(feature = "ptr_internals", issue = "none")] |
| impl<T: ?Sized> From<Unique<T>> for NonNull<T> { |
| #[inline] |
| fn from(unique: Unique<T>) -> Self { |
| unique.as_non_null_ptr() |
| } |
| } |
| |
| #[stable(feature = "nonnull", since = "1.25.0")] |
| impl<T: ?Sized> From<&mut T> for NonNull<T> { |
| /// Converts a `&mut T` to a `NonNull<T>`. |
| /// |
| /// This conversion is safe and infallible since references cannot be null. |
| #[inline] |
| fn from(reference: &mut T) -> Self { |
| // SAFETY: A mutable reference cannot be null. |
| unsafe { NonNull { pointer: reference as *mut T } } |
| } |
| } |
| |
| #[stable(feature = "nonnull", since = "1.25.0")] |
| impl<T: ?Sized> From<&T> for NonNull<T> { |
| /// Converts a `&T` to a `NonNull<T>`. |
| /// |
| /// This conversion is safe and infallible since references cannot be null. |
| #[inline] |
| fn from(reference: &T) -> Self { |
| // SAFETY: A reference cannot be null. |
| unsafe { NonNull { pointer: reference as *const T } } |
| } |
| } |