libgo/go/internal/poll/splice_linux.go - rust-lang/gcc - Git at Google

 // Copyright 2018 The Go Authors. All rights reserved.
 // Use of this source code is governed by a BSD-style
 // license that can be found in the LICENSE file.

 package poll

 import (
 	"runtime"
 	"sync"
 	"sync/atomic"
 	"syscall"
 	"unsafe"
 )

 const (
 	// spliceNonblock makes calls to splice(2) non-blocking.
 	spliceNonblock = 0x2

 	// maxSpliceSize is the maximum amount of data Splice asks
 	// the kernel to move in a single call to splice(2).
 	maxSpliceSize = 4 << 20
 )

 // Splice transfers at most remain bytes of data from src to dst, using the
 // splice system call to minimize copies of data from and to userspace.
 //
 // Splice gets a pipe buffer from the pool or creates a new one if needed, to serve as a buffer for the data transfer.
 // src and dst must both be stream-oriented sockets.
 //
 // If err != nil, sc is the system call which caused the error.
 func Splice(dst, src *FD, remain int64) (written int64, handled bool, sc string, err error) {
 	p, sc, err := getPipe()
 	if err != nil {
 		return 0, false, sc, err
 	}
 	defer putPipe(p)
 	var inPipe, n int
 	for err == nil && remain > 0 {
 		max := maxSpliceSize
 		if int64(max) > remain {
 			max = int(remain)
 		}
 		inPipe, err = spliceDrain(p.wfd, src, max)
 		// The operation is considered handled if splice returns no
 		// error, or an error other than EINVAL. An EINVAL means the
 		// kernel does not support splice for the socket type of src.
 		// The failed syscall does not consume any data so it is safe
 		// to fall back to a generic copy.
 		//
 		// spliceDrain should never return EAGAIN, so if err != nil,
 		// Splice cannot continue.
 		//
 		// If inPipe == 0 && err == nil, src is at EOF, and the
 		// transfer is complete.
 		handled = handled || (err != syscall.EINVAL)
 		if err != nil || inPipe == 0 {
 			break
 		}
 		p.data += inPipe

 		n, err = splicePump(dst, p.rfd, inPipe)
 		if n > 0 {
 			written += int64(n)
 			remain -= int64(n)
 			p.data -= n
 		}
 	}
 	if err != nil {
 		return written, handled, "splice", err
 	}
 	return written, true, "", nil
 }

 // spliceDrain moves data from a socket to a pipe.
 //
 // Invariant: when entering spliceDrain, the pipe is empty. It is either in its
 // initial state, or splicePump has emptied it previously.
 //
 // Given this, spliceDrain can reasonably assume that the pipe is ready for
 // writing, so if splice returns EAGAIN, it must be because the socket is not
 // ready for reading.
 //
 // If spliceDrain returns (0, nil), src is at EOF.
 func spliceDrain(pipefd int, sock *FD, max int) (int, error) {
 	if err := sock.readLock(); err != nil {
 		return 0, err
 	}
 	defer sock.readUnlock()
 	if err := sock.pd.prepareRead(sock.isFile); err != nil {
 		return 0, err
 	}
 	for {
 		n, err := splice(pipefd, sock.Sysfd, max, spliceNonblock)
 		if err == syscall.EINTR {
 			continue
 		}
 		if err != syscall.EAGAIN {
 			return n, err
 		}
 		if err := sock.pd.waitRead(sock.isFile); err != nil {
 			return n, err
 		}
 	}
 }

 // splicePump moves all the buffered data from a pipe to a socket.
 //
 // Invariant: when entering splicePump, there are exactly inPipe
 // bytes of data in the pipe, from a previous call to spliceDrain.
 //
 // By analogy to the condition from spliceDrain, splicePump
 // only needs to poll the socket for readiness, if splice returns
 // EAGAIN.
 //
 // If splicePump cannot move all the data in a single call to
 // splice(2), it loops over the buffered data until it has written
 // all of it to the socket. This behavior is similar to the Write
 // step of an io.Copy in userspace.
 func splicePump(sock *FD, pipefd int, inPipe int) (int, error) {
 	if err := sock.writeLock(); err != nil {
 		return 0, err
 	}
 	defer sock.writeUnlock()
 	if err := sock.pd.prepareWrite(sock.isFile); err != nil {
 		return 0, err
 	}
 	written := 0
 	for inPipe > 0 {
 		n, err := splice(sock.Sysfd, pipefd, inPipe, spliceNonblock)
 		// Here, the condition n == 0 && err == nil should never be
 		// observed, since Splice controls the write side of the pipe.
 		if n > 0 {
 			inPipe -= n
 			written += n
 			continue
 		}
 		if err != syscall.EAGAIN {
 			return written, err
 		}
 		if err := sock.pd.waitWrite(sock.isFile); err != nil {
 			return written, err
 		}
 	}
 	return written, nil
 }

 // splice wraps the splice system call. Since the current implementation
 // only uses splice on sockets and pipes, the offset arguments are unused.
 // splice returns int instead of int64, because callers never ask it to
 // move more data in a single call than can fit in an int32.
 func splice(out int, in int, max int, flags int) (int, error) {
 	n, err := syscall.Splice(in, nil, out, nil, max, flags)
 	return int(n), err
 }

 type splicePipeFields struct {
 	rfd  int
 	wfd  int
 	data int
 }

 type splicePipe struct {
 	splicePipeFields

 	// We want to use a finalizer, so ensure that the size is
 	// large enough to not use the tiny allocator.
 	_ [24 - unsafe.Sizeof(splicePipeFields{})%24]byte
 }

 // splicePipePool caches pipes to avoid high-frequency construction and destruction of pipe buffers.
 // The garbage collector will free all pipes in the sync.Pool periodically, thus we need to set up
 // a finalizer for each pipe to close its file descriptors before the actual GC.
 var splicePipePool = sync.Pool{New: newPoolPipe}

 func newPoolPipe() any {
 	// Discard the error which occurred during the creation of pipe buffer,
 	// redirecting the data transmission to the conventional way utilizing read() + write() as a fallback.
 	p := newPipe()
 	if p == nil {
 		return nil
 	}
 	runtime.SetFinalizer(p, destroyPipe)
 	return p
 }

 // getPipe tries to acquire a pipe buffer from the pool or create a new one with newPipe() if it gets nil from the cache.
 //
 // Note that it may fail to create a new pipe buffer by newPipe(), in which case getPipe() will return a generic error
 // and system call name splice in a string as the indication.
 func getPipe() (*splicePipe, string, error) {
 	v := splicePipePool.Get()
 	if v == nil {
 		return nil, "splice", syscall.EINVAL
 	}
 	return v.(*splicePipe), "", nil
 }

 func putPipe(p *splicePipe) {
 	// If there is still data left in the pipe,
 	// then close and discard it instead of putting it back into the pool.
 	if p.data != 0 {
 		runtime.SetFinalizer(p, nil)
 		destroyPipe(p)
 		return
 	}
 	splicePipePool.Put(p)
 }

 var disableSplice unsafe.Pointer

 // newPipe sets up a pipe for a splice operation.
 func newPipe() (sp *splicePipe) {
 	p := (*bool)(atomic.LoadPointer(&disableSplice))
 	if p != nil && *p {
 		return nil
 	}

 	var fds [2]int
 	// pipe2 was added in 2.6.27 and our minimum requirement is 2.6.23, so it
 	// might not be implemented. Falling back to pipe is possible, but prior to
 	// 2.6.29 splice returns -EAGAIN instead of 0 when the connection is
 	// closed.
 	const flags = syscall.O_CLOEXEC | syscall.O_NONBLOCK
 	if err := syscall.Pipe2(fds[:], flags); err != nil {
 		return nil
 	}

 	sp = &splicePipe{splicePipeFields: splicePipeFields{rfd: fds[0], wfd: fds[1]}}

 	if p == nil {
 		p = new(bool)
 		defer atomic.StorePointer(&disableSplice, unsafe.Pointer(p))

 		// F_GETPIPE_SZ was added in 2.6.35, which does not have the -EAGAIN bug.
 		if syscall.F_GETPIPE_SZ == 0 {
 			*p = true
 			destroyPipe(sp)
 			return nil
 		}
 		if _, err := fcntl(fds[0], syscall.F_GETPIPE_SZ, 0); err != nil {
 			*p = true
 			destroyPipe(sp)
 			return nil
 		}
 	}

 	return
 }

 // destroyPipe destroys a pipe.
 func destroyPipe(p *splicePipe) {
 	CloseFunc(p.rfd)
 	CloseFunc(p.wfd)
 }
	// Copyright 2018 The Go Authors. All rights reserved.
	// Use of this source code is governed by a BSD-style
	// license that can be found in the LICENSE file.

	package poll

	import (
	"runtime"
	"sync"
	"sync/atomic"
	"syscall"
	"unsafe"
	)

	const (
	// spliceNonblock makes calls to splice(2) non-blocking.
	spliceNonblock = 0x2

	// maxSpliceSize is the maximum amount of data Splice asks
	// the kernel to move in a single call to splice(2).
	maxSpliceSize = 4 << 20
	)

	// Splice transfers at most remain bytes of data from src to dst, using the
	// splice system call to minimize copies of data from and to userspace.
	//
	// Splice gets a pipe buffer from the pool or creates a new one if needed, to serve as a buffer for the data transfer.
	// src and dst must both be stream-oriented sockets.
	//
	// If err != nil, sc is the system call which caused the error.
	func Splice(dst, src *FD, remain int64) (written int64, handled bool, sc string, err error) {
	p, sc, err := getPipe()
	if err != nil {
	return 0, false, sc, err
	}
	defer putPipe(p)
	var inPipe, n int
	for err == nil && remain > 0 {
	max := maxSpliceSize
	if int64(max) > remain {
	max = int(remain)
	}
	inPipe, err = spliceDrain(p.wfd, src, max)
	// The operation is considered handled if splice returns no
	// error, or an error other than EINVAL. An EINVAL means the
	// kernel does not support splice for the socket type of src.
	// The failed syscall does not consume any data so it is safe
	// to fall back to a generic copy.
	//
	// spliceDrain should never return EAGAIN, so if err != nil,
	// Splice cannot continue.
	//
	// If inPipe == 0 && err == nil, src is at EOF, and the
	// transfer is complete.
	handled = handled \|\| (err != syscall.EINVAL)
	if err != nil \|\| inPipe == 0 {
	break
	}
	p.data += inPipe

	n, err = splicePump(dst, p.rfd, inPipe)
	if n > 0 {
	written += int64(n)
	remain -= int64(n)
	p.data -= n
	}
	}
	if err != nil {
	return written, handled, "splice", err
	}
	return written, true, "", nil
	}

	// spliceDrain moves data from a socket to a pipe.
	//
	// Invariant: when entering spliceDrain, the pipe is empty. It is either in its
	// initial state, or splicePump has emptied it previously.
	//
	// Given this, spliceDrain can reasonably assume that the pipe is ready for
	// writing, so if splice returns EAGAIN, it must be because the socket is not
	// ready for reading.
	//
	// If spliceDrain returns (0, nil), src is at EOF.
	func spliceDrain(pipefd int, sock *FD, max int) (int, error) {
	if err := sock.readLock(); err != nil {
	return 0, err
	}
	defer sock.readUnlock()
	if err := sock.pd.prepareRead(sock.isFile); err != nil {
	return 0, err
	}
	for {
	n, err := splice(pipefd, sock.Sysfd, max, spliceNonblock)
	if err == syscall.EINTR {
	continue
	}
	if err != syscall.EAGAIN {
	return n, err
	}
	if err := sock.pd.waitRead(sock.isFile); err != nil {
	return n, err
	}
	}
	}

	// splicePump moves all the buffered data from a pipe to a socket.
	//
	// Invariant: when entering splicePump, there are exactly inPipe
	// bytes of data in the pipe, from a previous call to spliceDrain.
	//
	// By analogy to the condition from spliceDrain, splicePump
	// only needs to poll the socket for readiness, if splice returns
	// EAGAIN.
	//
	// If splicePump cannot move all the data in a single call to
	// splice(2), it loops over the buffered data until it has written
	// all of it to the socket. This behavior is similar to the Write
	// step of an io.Copy in userspace.
	func splicePump(sock *FD, pipefd int, inPipe int) (int, error) {
	if err := sock.writeLock(); err != nil {
	return 0, err
	}
	defer sock.writeUnlock()
	if err := sock.pd.prepareWrite(sock.isFile); err != nil {
	return 0, err
	}
	written := 0
	for inPipe > 0 {
	n, err := splice(sock.Sysfd, pipefd, inPipe, spliceNonblock)
	// Here, the condition n == 0 && err == nil should never be
	// observed, since Splice controls the write side of the pipe.
	if n > 0 {
	inPipe -= n
	written += n
	continue
	}
	if err != syscall.EAGAIN {
	return written, err
	}
	if err := sock.pd.waitWrite(sock.isFile); err != nil {
	return written, err
	}
	}
	return written, nil
	}

	// splice wraps the splice system call. Since the current implementation
	// only uses splice on sockets and pipes, the offset arguments are unused.
	// splice returns int instead of int64, because callers never ask it to
	// move more data in a single call than can fit in an int32.
	func splice(out int, in int, max int, flags int) (int, error) {
	n, err := syscall.Splice(in, nil, out, nil, max, flags)
	return int(n), err
	}

	type splicePipeFields struct {
	rfd int
	wfd int
	data int
	}

	type splicePipe struct {
	splicePipeFields

	// We want to use a finalizer, so ensure that the size is
	// large enough to not use the tiny allocator.
	_ [24 - unsafe.Sizeof(splicePipeFields{})%24]byte
	}

	// splicePipePool caches pipes to avoid high-frequency construction and destruction of pipe buffers.
	// The garbage collector will free all pipes in the sync.Pool periodically, thus we need to set up
	// a finalizer for each pipe to close its file descriptors before the actual GC.
	var splicePipePool = sync.Pool{New: newPoolPipe}

	func newPoolPipe() any {
	// Discard the error which occurred during the creation of pipe buffer,
	// redirecting the data transmission to the conventional way utilizing read() + write() as a fallback.
	p := newPipe()
	if p == nil {
	return nil
	}
	runtime.SetFinalizer(p, destroyPipe)
	return p
	}

	// getPipe tries to acquire a pipe buffer from the pool or create a new one with newPipe() if it gets nil from the cache.
	//
	// Note that it may fail to create a new pipe buffer by newPipe(), in which case getPipe() will return a generic error
	// and system call name splice in a string as the indication.
	func getPipe() (*splicePipe, string, error) {
	v := splicePipePool.Get()
	if v == nil {
	return nil, "splice", syscall.EINVAL
	}
	return v.(*splicePipe), "", nil
	}

	func putPipe(p *splicePipe) {
	// If there is still data left in the pipe,
	// then close and discard it instead of putting it back into the pool.
	if p.data != 0 {
	runtime.SetFinalizer(p, nil)
	destroyPipe(p)
	return
	}
	splicePipePool.Put(p)
	}

	var disableSplice unsafe.Pointer

	// newPipe sets up a pipe for a splice operation.
	func newPipe() (sp *splicePipe) {
	p := (*bool)(atomic.LoadPointer(&disableSplice))
	if p != nil && *p {
	return nil
	}

	var fds [2]int
	// pipe2 was added in 2.6.27 and our minimum requirement is 2.6.23, so it
	// might not be implemented. Falling back to pipe is possible, but prior to
	// 2.6.29 splice returns -EAGAIN instead of 0 when the connection is
	// closed.
	const flags = syscall.O_CLOEXEC \| syscall.O_NONBLOCK
	if err := syscall.Pipe2(fds[:], flags); err != nil {
	return nil
	}

	sp = &splicePipe{splicePipeFields: splicePipeFields{rfd: fds[0], wfd: fds[1]}}

	if p == nil {
	p = new(bool)
	defer atomic.StorePointer(&disableSplice, unsafe.Pointer(p))

	// F_GETPIPE_SZ was added in 2.6.35, which does not have the -EAGAIN bug.
	if syscall.F_GETPIPE_SZ == 0 {
	*p = true
	destroyPipe(sp)
	return nil
	}
	if _, err := fcntl(fds[0], syscall.F_GETPIPE_SZ, 0); err != nil {
	*p = true
	destroyPipe(sp)
	return nil
	}
	}

	return
	}

	// destroyPipe destroys a pipe.
	func destroyPipe(p *splicePipe) {
	CloseFunc(p.rfd)
	CloseFunc(p.wfd)
	}