//! Random data generation with the Linux kernel.
//!
//! The first interface random data interface to be introduced on Linux were
//! the `/dev/random` and `/dev/urandom` special files. As paths can become
//! unreachable when inside a chroot and when the file descriptors are exhausted,
//! this was not enough to provide userspace with a reliable source of randomness,
//! so when the OpenBSD 5.6 introduced the `getentropy` syscall, Linux 3.17 got
//! its very own `getrandom`  syscall to match.[^1] Unfortunately, even if our
//! minimum supported version were high enough, we still couldn't rely on the
//! syscall being available, as it is blocked in `seccomp` by default.
//!
//! The question is therefore which of the random sources to use. Historically,
//! the kernel contained two pools: the blocking and non-blocking pool. The
//! blocking pool used entropy estimation to limit the amount of available
//! bytes, while the non-blocking pool, once initialized using the blocking
//! pool, uses a CPRNG to return an unlimited number of random bytes. With a
//! strong enough CPRNG however, the entropy estimation didn't contribute that
//! much towards security while being an excellent vector for DoS attacks. Thus,
//! the blocking pool was removed in kernel version 5.6.[^2] That patch did not
//! magically increase the quality of the non-blocking pool, however, so we can
//! safely consider it strong enough even in older kernel versions and use it
//! unconditionally.
//!
//! One additional consideration to make is that the non-blocking pool is not
//! always initialized during early boot. We want the best quality of randomness
//! for the output of `DefaultRandomSource` so we simply wait until it is
//! initialized. When `HashMap` keys however, this represents a potential source
//! of deadlocks, as the additional entropy may only be generated once the
//! program makes forward progress. In that case, we just use the best random
//! data the system has available at the time.
//!
//! So in conclusion, we always want the output of the non-blocking pool, but
//! may need to wait until it is initialized. The default behavior of `getrandom`
//! is to wait until the non-blocking pool is initialized and then draw from there,
//! so if `getrandom` is available, we use its default to generate the bytes. For
//! `HashMap`, however, we need to specify the `GRND_INSECURE` flags, but that
//! is only available starting with kernel version 5.6. Thus, if we detect that
//! the flag is unsupported, we try `GRND_NONBLOCK` instead, which will only
//! succeed if the pool is initialized. If it isn't, we fall back to the file
//! access method.
//!
//! The behavior of `/dev/urandom` is inverse to that of `getrandom`: it always
//! yields data, even when the pool is not initialized. For generating `HashMap`
//! keys, this is not important, so we can use it directly. For secure data
//! however, we need to wait until initialization, which we can do by `poll`ing
//! `/dev/random`.
//!
//! TLDR: our fallback strategies are:
//!
//! Secure data                                 | `HashMap` keys
//! --------------------------------------------|------------------
//! getrandom(0)                                | getrandom(GRND_INSECURE)
//! poll("/dev/random") && read("/dev/urandom") | getrandom(GRND_NONBLOCK)
//!                                             | read("/dev/urandom")
//!
//! [^1]: <https://lwn.net/Articles/606141/>
//! [^2]: <https://lwn.net/Articles/808575/>
//!
// FIXME(in 2040 or so): once the minimum kernel version is 5.6, remove the
// `GRND_NONBLOCK` fallback and use `/dev/random` instead of `/dev/urandom`
// when secure data is required.

use crate::fs::File;
use crate::io::Read;
use crate::os::fd::AsRawFd;
use crate::sync::OnceLock;
use crate::sync::atomic::Ordering::{Acquire, Relaxed, Release};
use crate::sync::atomic::{Atomic, AtomicBool};
use crate::sys::io::errno;
use crate::sys::pal::weak::syscall;

fn getrandom(mut bytes: &mut [u8], insecure: bool) {
    // A weak symbol allows interposition, e.g. for perf measurements that want to
    // disable randomness for consistency. Otherwise, we'll try a raw syscall.
    // (`getrandom` was added in glibc 2.25, musl 1.1.20, android API level 28)
    syscall!(
        fn getrandom(
            buffer: *mut libc::c_void,
            length: libc::size_t,
            flags: libc::c_uint,
        ) -> libc::ssize_t;
    );

    static GETRANDOM_AVAILABLE: Atomic<bool> = AtomicBool::new(true);
    static GRND_INSECURE_AVAILABLE: Atomic<bool> = AtomicBool::new(true);
    static URANDOM_READY: Atomic<bool> = AtomicBool::new(false);
    static DEVICE: OnceLock<File> = OnceLock::new();

    if GETRANDOM_AVAILABLE.load(Relaxed) {
        loop {
            if bytes.is_empty() {
                return;
            }

            let flags = if insecure {
                if GRND_INSECURE_AVAILABLE.load(Relaxed) {
                    libc::GRND_INSECURE
                } else {
                    libc::GRND_NONBLOCK
                }
            } else {
                0
            };

            let ret = unsafe { getrandom(bytes.as_mut_ptr().cast(), bytes.len(), flags) };
            if ret != -1 {
                bytes = &mut bytes[ret as usize..];
            } else {
                match errno() {
                    libc::EINTR => continue,
                    // `GRND_INSECURE` is not available, try
                    // `GRND_NONBLOCK`.
                    libc::EINVAL if flags == libc::GRND_INSECURE => {
                        GRND_INSECURE_AVAILABLE.store(false, Relaxed);
                        continue;
                    }
                    // The pool is not initialized yet, fall back to
                    // /dev/urandom for now.
                    libc::EAGAIN if flags == libc::GRND_NONBLOCK => break,
                    // `getrandom` is unavailable or blocked by seccomp.
                    // Don't try it again and fall back to /dev/urandom.
                    libc::ENOSYS | libc::EPERM => {
                        GETRANDOM_AVAILABLE.store(false, Relaxed);
                        break;
                    }
                    _ => panic!("failed to generate random data"),
                }
            }
        }
    }

    // When we want cryptographic strength, we need to wait for the CPRNG-pool
    // to become initialized. Do this by polling `/dev/random` until it is ready.
    if !insecure {
        if !URANDOM_READY.load(Acquire) {
            let random = File::open("/dev/random").expect("failed to open /dev/random");
            let mut fd = libc::pollfd { fd: random.as_raw_fd(), events: libc::POLLIN, revents: 0 };

            while !URANDOM_READY.load(Acquire) {
                let ret = unsafe { libc::poll(&mut fd, 1, -1) };
                match ret {
                    1 => {
                        assert_eq!(fd.revents, libc::POLLIN);
                        URANDOM_READY.store(true, Release);
                        break;
                    }
                    -1 if errno() == libc::EINTR => continue,
                    _ => panic!("poll(\"/dev/random\") failed"),
                }
            }
        }
    }

    DEVICE
        .get_or_try_init(|| File::open("/dev/urandom"))
        .and_then(|mut dev| dev.read_exact(bytes))
        .expect("failed to generate random data");
}

pub fn fill_bytes(bytes: &mut [u8]) {
    getrandom(bytes, false);
}

pub fn hashmap_random_keys() -> (u64, u64) {
    let mut bytes = [0; 16];
    getrandom(&mut bytes, true);
    let k1 = u64::from_ne_bytes(bytes[..8].try_into().unwrap());
    let k2 = u64::from_ne_bytes(bytes[8..].try_into().unwrap());
    (k1, k2)
}