/*!
Managing the scope stack. The scopes are tied to lexical scopes, so as
we descend the THIR, we push a scope on the stack, build its
contents, and then pop it off. Every scope is named by a
`region::Scope`.

### SEME Regions

When pushing a new [Scope], we record the current point in the graph (a
basic block); this marks the entry to the scope. We then generate more
stuff in the control-flow graph. Whenever the scope is exited, either
via a `break` or `return` or just by fallthrough, that marks an exit
from the scope. Each lexical scope thus corresponds to a single-entry,
multiple-exit (SEME) region in the control-flow graph.

For now, we record the `region::Scope` to each SEME region for later reference
(see caveat in next paragraph). This is because destruction scopes are tied to
them. This may change in the future so that MIR lowering determines its own
destruction scopes.

### Not so SEME Regions

In the course of building matches, it sometimes happens that certain code
(namely guards) gets executed multiple times. This means that the scope lexical
scope may in fact correspond to multiple, disjoint SEME regions. So in fact our
mapping is from one scope to a vector of SEME regions. Since the SEME regions
are disjoint, the mapping is still one-to-one for the set of SEME regions that
we're currently in.

Also in matches, the scopes assigned to arms are not always even SEME regions!
Each arm has a single region with one entry for each pattern. We manually
manipulate the scheduled drops in this scope to avoid dropping things multiple
times.

### Drops

The primary purpose for scopes is to insert drops: while building
the contents, we also accumulate places that need to be dropped upon
exit from each scope. This is done by calling `schedule_drop`. Once a
drop is scheduled, whenever we branch out we will insert drops of all
those places onto the outgoing edge. Note that we don't know the full
set of scheduled drops up front, and so whenever we exit from the
scope we only drop the values scheduled thus far. For example, consider
the scope S corresponding to this loop:

```
# let cond = true;
loop {
    let x = ..;
    if cond { break; }
    let y = ..;
}
```

When processing the `let x`, we will add one drop to the scope for
`x`. The break will then insert a drop for `x`. When we process `let
y`, we will add another drop (in fact, to a subscope, but let's ignore
that for now); any later drops would also drop `y`.

### Early exit

There are numerous "normal" ways to early exit a scope: `break`,
`continue`, `return` (panics are handled separately). Whenever an
early exit occurs, the method `break_scope` is called. It is given the
current point in execution where the early exit occurs, as well as the
scope you want to branch to (note that all early exits from to some
other enclosing scope). `break_scope` will record the set of drops currently
scheduled in a [DropTree]. Later, before `in_breakable_scope` exits, the drops
will be added to the CFG.

Panics are handled in a similar fashion, except that the drops are added to the
MIR once the rest of the function has finished being lowered. If a terminator
can panic, call `diverge_from(block)` with the block containing the terminator
`block`.

### Breakable scopes

In addition to the normal scope stack, we track a loop scope stack
that contains only loops and breakable blocks. It tracks where a `break`,
`continue` or `return` should go to.

*/

use std::mem;

use interpret::ErrorHandled;
use rustc_data_structures::fx::FxHashMap;
use rustc_hir::HirId;
use rustc_index::{IndexSlice, IndexVec};
use rustc_middle::middle::region;
use rustc_middle::mir::{self, *};
use rustc_middle::thir::{AdtExpr, AdtExprBase, ArmId, ExprId, ExprKind, LintLevel};
use rustc_middle::ty::{self, Ty, TyCtxt, TypeVisitableExt, ValTree};
use rustc_middle::{bug, span_bug};
use rustc_pattern_analysis::rustc::RustcPatCtxt;
use rustc_session::lint::Level;
use rustc_span::source_map::Spanned;
use rustc_span::{DUMMY_SP, Span};
use tracing::{debug, instrument};

use super::matches::BuiltMatchTree;
use crate::builder::{BlockAnd, BlockAndExtension, BlockFrame, Builder, CFG};
use crate::errors::{ConstContinueBadConst, ConstContinueUnknownJumpTarget};

#[derive(Debug)]
pub(crate) struct Scopes<'tcx> {
    scopes: Vec<Scope>,

    /// The current set of breakable scopes. See module comment for more details.
    breakable_scopes: Vec<BreakableScope<'tcx>>,

    const_continuable_scopes: Vec<ConstContinuableScope<'tcx>>,

    /// The scope of the innermost if-then currently being lowered.
    if_then_scope: Option<IfThenScope>,

    /// Drops that need to be done on unwind paths. See the comment on
    /// [DropTree] for more details.
    unwind_drops: DropTree,

    /// Drops that need to be done on paths to the `CoroutineDrop` terminator.
    coroutine_drops: DropTree,
}

#[derive(Debug)]
struct Scope {
    /// The source scope this scope was created in.
    source_scope: SourceScope,

    /// the region span of this scope within source code.
    region_scope: region::Scope,

    /// set of places to drop when exiting this scope. This starts
    /// out empty but grows as variables are declared during the
    /// building process. This is a stack, so we always drop from the
    /// end of the vector (top of the stack) first.
    drops: Vec<DropData>,

    moved_locals: Vec<Local>,

    /// The drop index that will drop everything in and below this scope on an
    /// unwind path.
    cached_unwind_block: Option<DropIdx>,

    /// The drop index that will drop everything in and below this scope on a
    /// coroutine drop path.
    cached_coroutine_drop_block: Option<DropIdx>,
}

#[derive(Clone, Copy, Debug)]
struct DropData {
    /// The `Span` where drop obligation was incurred (typically where place was
    /// declared)
    source_info: SourceInfo,

    /// local to drop
    local: Local,

    /// Whether this is a value Drop or a StorageDead.
    kind: DropKind,
}

#[derive(Debug, Clone, Copy, PartialEq, Eq, Hash)]
pub(crate) enum DropKind {
    Value,
    Storage,
    ForLint,
}

#[derive(Debug)]
struct BreakableScope<'tcx> {
    /// Region scope of the loop
    region_scope: region::Scope,
    /// The destination of the loop/block expression itself (i.e., where to put
    /// the result of a `break` or `return` expression)
    break_destination: Place<'tcx>,
    /// Drops that happen on the `break`/`return` path.
    break_drops: DropTree,
    /// Drops that happen on the `continue` path.
    continue_drops: Option<DropTree>,
}

#[derive(Debug)]
struct ConstContinuableScope<'tcx> {
    /// The scope for the `#[loop_match]` which its `#[const_continue]`s will jump to.
    region_scope: region::Scope,
    /// The place of the state of a `#[loop_match]`, which a `#[const_continue]` must update.
    state_place: Place<'tcx>,

    arms: Box<[ArmId]>,
    built_match_tree: BuiltMatchTree<'tcx>,

    /// Drops that happen on a `#[const_continue]`
    const_continue_drops: DropTree,
}

#[derive(Debug)]
struct IfThenScope {
    /// The if-then scope or arm scope
    region_scope: region::Scope,
    /// Drops that happen on the `else` path.
    else_drops: DropTree,
}

/// The target of an expression that breaks out of a scope
#[derive(Clone, Copy, Debug)]
pub(crate) enum BreakableTarget {
    Continue(region::Scope),
    Break(region::Scope),
    Return,
}

rustc_index::newtype_index! {
    #[orderable]
    struct DropIdx {}
}

const ROOT_NODE: DropIdx = DropIdx::ZERO;

/// A tree of drops that we have deferred lowering. It's used for:
///
/// * Drops on unwind paths
/// * Drops on coroutine drop paths (when a suspended coroutine is dropped)
/// * Drops on return and loop exit paths
/// * Drops on the else path in an `if let` chain
///
/// Once no more nodes could be added to the tree, we lower it to MIR in one go
/// in `build_mir`.
#[derive(Debug)]
struct DropTree {
    /// Nodes in the drop tree, containing drop data and a link to the next node.
    drop_nodes: IndexVec<DropIdx, DropNode>,
    /// Map for finding the index of an existing node, given its contents.
    existing_drops_map: FxHashMap<DropNodeKey, DropIdx>,
    /// Edges into the `DropTree` that need to be added once it's lowered.
    entry_points: Vec<(DropIdx, BasicBlock)>,
}

/// A single node in the drop tree.
#[derive(Debug)]
struct DropNode {
    /// Info about the drop to be performed at this node in the drop tree.
    data: DropData,
    /// Index of the "next" drop to perform (in drop order, not declaration order).
    next: DropIdx,
}

/// Subset of [`DropNode`] used for reverse lookup in a hash table.
#[derive(Debug, PartialEq, Eq, Hash)]
struct DropNodeKey {
    next: DropIdx,
    local: Local,
}

impl Scope {
    /// Whether there's anything to do for the cleanup path, that is,
    /// when unwinding through this scope. This includes destructors,
    /// but not StorageDead statements, which don't get emitted at all
    /// for unwinding, for several reasons:
    ///  * clang doesn't emit llvm.lifetime.end for C++ unwinding
    ///  * LLVM's memory dependency analysis can't handle it atm
    ///  * polluting the cleanup MIR with StorageDead creates
    ///    landing pads even though there's no actual destructors
    ///  * freeing up stack space has no effect during unwinding
    /// Note that for coroutines we do emit StorageDeads, for the
    /// use of optimizations in the MIR coroutine transform.
    fn needs_cleanup(&self) -> bool {
        self.drops.iter().any(|drop| match drop.kind {
            DropKind::Value | DropKind::ForLint => true,
            DropKind::Storage => false,
        })
    }

    fn invalidate_cache(&mut self) {
        self.cached_unwind_block = None;
        self.cached_coroutine_drop_block = None;
    }
}

/// A trait that determined how [DropTree] creates its blocks and
/// links to any entry nodes.
trait DropTreeBuilder<'tcx> {
    /// Create a new block for the tree. This should call either
    /// `cfg.start_new_block()` or `cfg.start_new_cleanup_block()`.
    fn make_block(cfg: &mut CFG<'tcx>) -> BasicBlock;

    /// Links a block outside the drop tree, `from`, to the block `to` inside
    /// the drop tree.
    fn link_entry_point(cfg: &mut CFG<'tcx>, from: BasicBlock, to: BasicBlock);
}

impl DropTree {
    fn new() -> Self {
        // The root node of the tree doesn't represent a drop, but instead
        // represents the block in the tree that should be jumped to once all
        // of the required drops have been performed.
        let fake_source_info = SourceInfo::outermost(DUMMY_SP);
        let fake_data =
            DropData { source_info: fake_source_info, local: Local::MAX, kind: DropKind::Storage };
        let drop_nodes = IndexVec::from_raw(vec![DropNode { data: fake_data, next: DropIdx::MAX }]);
        Self { drop_nodes, entry_points: Vec::new(), existing_drops_map: FxHashMap::default() }
    }

    /// Adds a node to the drop tree, consisting of drop data and the index of
    /// the "next" drop (in drop order), which could be the sentinel [`ROOT_NODE`].
    ///
    /// If there is already an equivalent node in the tree, nothing is added, and
    /// that node's index is returned. Otherwise, the new node's index is returned.
    fn add_drop(&mut self, data: DropData, next: DropIdx) -> DropIdx {
        let drop_nodes = &mut self.drop_nodes;
        *self
            .existing_drops_map
            .entry(DropNodeKey { next, local: data.local })
            // Create a new node, and also add its index to the map.
            .or_insert_with(|| drop_nodes.push(DropNode { data, next }))
    }

    /// Registers `from` as an entry point to this drop tree, at `to`.
    ///
    /// During [`Self::build_mir`], `from` will be linked to the corresponding
    /// block within the drop tree.
    fn add_entry_point(&mut self, from: BasicBlock, to: DropIdx) {
        debug_assert!(to < self.drop_nodes.next_index());
        self.entry_points.push((to, from));
    }

    /// Builds the MIR for a given drop tree.
    fn build_mir<'tcx, T: DropTreeBuilder<'tcx>>(
        &mut self,
        cfg: &mut CFG<'tcx>,
        root_node: Option<BasicBlock>,
    ) -> IndexVec<DropIdx, Option<BasicBlock>> {
        debug!("DropTree::build_mir(drops = {:#?})", self);

        let mut blocks = self.assign_blocks::<T>(cfg, root_node);
        self.link_blocks(cfg, &mut blocks);

        blocks
    }

    /// Assign blocks for all of the drops in the drop tree that need them.
    fn assign_blocks<'tcx, T: DropTreeBuilder<'tcx>>(
        &mut self,
        cfg: &mut CFG<'tcx>,
        root_node: Option<BasicBlock>,
    ) -> IndexVec<DropIdx, Option<BasicBlock>> {
        // StorageDead statements can share blocks with each other and also with
        // a Drop terminator. We iterate through the drops to find which drops
        // need their own block.
        #[derive(Clone, Copy)]
        enum Block {
            // This drop is unreachable
            None,
            // This drop is only reachable through the `StorageDead` with the
            // specified index.
            Shares(DropIdx),
            // This drop has more than one way of being reached, or it is
            // branched to from outside the tree, or its predecessor is a
            // `Value` drop.
            Own,
        }

        let mut blocks = IndexVec::from_elem(None, &self.drop_nodes);
        blocks[ROOT_NODE] = root_node;

        let mut needs_block = IndexVec::from_elem(Block::None, &self.drop_nodes);
        if root_node.is_some() {
            // In some cases (such as drops for `continue`) the root node
            // already has a block. In this case, make sure that we don't
            // override it.
            needs_block[ROOT_NODE] = Block::Own;
        }

        // Sort so that we only need to check the last value.
        let entry_points = &mut self.entry_points;
        entry_points.sort();

        for (drop_idx, drop_node) in self.drop_nodes.iter_enumerated().rev() {
            if entry_points.last().is_some_and(|entry_point| entry_point.0 == drop_idx) {
                let block = *blocks[drop_idx].get_or_insert_with(|| T::make_block(cfg));
                needs_block[drop_idx] = Block::Own;
                while entry_points.last().is_some_and(|entry_point| entry_point.0 == drop_idx) {
                    let entry_block = entry_points.pop().unwrap().1;
                    T::link_entry_point(cfg, entry_block, block);
                }
            }
            match needs_block[drop_idx] {
                Block::None => continue,
                Block::Own => {
                    blocks[drop_idx].get_or_insert_with(|| T::make_block(cfg));
                }
                Block::Shares(pred) => {
                    blocks[drop_idx] = blocks[pred];
                }
            }
            if let DropKind::Value = drop_node.data.kind {
                needs_block[drop_node.next] = Block::Own;
            } else if drop_idx != ROOT_NODE {
                match &mut needs_block[drop_node.next] {
                    pred @ Block::None => *pred = Block::Shares(drop_idx),
                    pred @ Block::Shares(_) => *pred = Block::Own,
                    Block::Own => (),
                }
            }
        }

        debug!("assign_blocks: blocks = {:#?}", blocks);
        assert!(entry_points.is_empty());

        blocks
    }

    fn link_blocks<'tcx>(
        &self,
        cfg: &mut CFG<'tcx>,
        blocks: &IndexSlice<DropIdx, Option<BasicBlock>>,
    ) {
        for (drop_idx, drop_node) in self.drop_nodes.iter_enumerated().rev() {
            let Some(block) = blocks[drop_idx] else { continue };
            match drop_node.data.kind {
                DropKind::Value => {
                    let terminator = TerminatorKind::Drop {
                        target: blocks[drop_node.next].unwrap(),
                        // The caller will handle this if needed.
                        unwind: UnwindAction::Terminate(UnwindTerminateReason::InCleanup),
                        place: drop_node.data.local.into(),
                        replace: false,
                        drop: None,
                        async_fut: None,
                    };
                    cfg.terminate(block, drop_node.data.source_info, terminator);
                }
                DropKind::ForLint => {
                    let stmt = Statement::new(
                        drop_node.data.source_info,
                        StatementKind::BackwardIncompatibleDropHint {
                            place: Box::new(drop_node.data.local.into()),
                            reason: BackwardIncompatibleDropReason::Edition2024,
                        },
                    );
                    cfg.push(block, stmt);
                    let target = blocks[drop_node.next].unwrap();
                    if target != block {
                        // Diagnostics don't use this `Span` but debuginfo
                        // might. Since we don't want breakpoints to be placed
                        // here, especially when this is on an unwind path, we
                        // use `DUMMY_SP`.
                        let source_info =
                            SourceInfo { span: DUMMY_SP, ..drop_node.data.source_info };
                        let terminator = TerminatorKind::Goto { target };
                        cfg.terminate(block, source_info, terminator);
                    }
                }
                // Root nodes don't correspond to a drop.
                DropKind::Storage if drop_idx == ROOT_NODE => {}
                DropKind::Storage => {
                    let stmt = Statement::new(
                        drop_node.data.source_info,
                        StatementKind::StorageDead(drop_node.data.local),
                    );
                    cfg.push(block, stmt);
                    let target = blocks[drop_node.next].unwrap();
                    if target != block {
                        // Diagnostics don't use this `Span` but debuginfo
                        // might. Since we don't want breakpoints to be placed
                        // here, especially when this is on an unwind path, we
                        // use `DUMMY_SP`.
                        let source_info =
                            SourceInfo { span: DUMMY_SP, ..drop_node.data.source_info };
                        let terminator = TerminatorKind::Goto { target };
                        cfg.terminate(block, source_info, terminator);
                    }
                }
            }
        }
    }
}

impl<'tcx> Scopes<'tcx> {
    pub(crate) fn new() -> Self {
        Self {
            scopes: Vec::new(),
            breakable_scopes: Vec::new(),
            const_continuable_scopes: Vec::new(),
            if_then_scope: None,
            unwind_drops: DropTree::new(),
            coroutine_drops: DropTree::new(),
        }
    }

    fn push_scope(&mut self, region_scope: (region::Scope, SourceInfo), vis_scope: SourceScope) {
        debug!("push_scope({:?})", region_scope);
        self.scopes.push(Scope {
            source_scope: vis_scope,
            region_scope: region_scope.0,
            drops: vec![],
            moved_locals: vec![],
            cached_unwind_block: None,
            cached_coroutine_drop_block: None,
        });
    }

    fn pop_scope(&mut self, region_scope: (region::Scope, SourceInfo)) -> Scope {
        let scope = self.scopes.pop().unwrap();
        assert_eq!(scope.region_scope, region_scope.0);
        scope
    }

    fn scope_index(&self, region_scope: region::Scope, span: Span) -> usize {
        self.scopes
            .iter()
            .rposition(|scope| scope.region_scope == region_scope)
            .unwrap_or_else(|| span_bug!(span, "region_scope {:?} does not enclose", region_scope))
    }

    /// Returns the topmost active scope, which is known to be alive until
    /// the next scope expression.
    fn topmost(&self) -> region::Scope {
        self.scopes.last().expect("topmost_scope: no scopes present").region_scope
    }
}

impl<'a, 'tcx> Builder<'a, 'tcx> {
    // Adding and removing scopes
    // ==========================

    ///  Start a breakable scope, which tracks where `continue`, `break` and
    ///  `return` should branch to.
    pub(crate) fn in_breakable_scope<F>(
        &mut self,
        loop_block: Option<BasicBlock>,
        break_destination: Place<'tcx>,
        span: Span,
        f: F,
    ) -> BlockAnd<()>
    where
        F: FnOnce(&mut Builder<'a, 'tcx>) -> Option<BlockAnd<()>>,
    {
        let region_scope = self.scopes.topmost();
        let scope = BreakableScope {
            region_scope,
            break_destination,
            break_drops: DropTree::new(),
            continue_drops: loop_block.map(|_| DropTree::new()),
        };
        self.scopes.breakable_scopes.push(scope);
        let normal_exit_block = f(self);
        let breakable_scope = self.scopes.breakable_scopes.pop().unwrap();
        assert!(breakable_scope.region_scope == region_scope);
        let break_block =
            self.build_exit_tree(breakable_scope.break_drops, region_scope, span, None);
        if let Some(drops) = breakable_scope.continue_drops {
            self.build_exit_tree(drops, region_scope, span, loop_block);
        }
        match (normal_exit_block, break_block) {
            (Some(block), None) | (None, Some(block)) => block,
            (None, None) => self.cfg.start_new_block().unit(),
            (Some(normal_block), Some(exit_block)) => {
                let target = self.cfg.start_new_block();
                let source_info = self.source_info(span);
                self.cfg.terminate(
                    normal_block.into_block(),
                    source_info,
                    TerminatorKind::Goto { target },
                );
                self.cfg.terminate(
                    exit_block.into_block(),
                    source_info,
                    TerminatorKind::Goto { target },
                );
                target.unit()
            }
        }
    }

    /// Start a const-continuable scope, which tracks where `#[const_continue] break` should
    /// branch to.
    pub(crate) fn in_const_continuable_scope<F>(
        &mut self,
        arms: Box<[ArmId]>,
        built_match_tree: BuiltMatchTree<'tcx>,
        state_place: Place<'tcx>,
        span: Span,
        f: F,
    ) -> BlockAnd<()>
    where
        F: FnOnce(&mut Builder<'a, 'tcx>) -> BlockAnd<()>,
    {
        let region_scope = self.scopes.topmost();
        let scope = ConstContinuableScope {
            region_scope,
            state_place,
            const_continue_drops: DropTree::new(),
            arms,
            built_match_tree,
        };
        self.scopes.const_continuable_scopes.push(scope);
        let normal_exit_block = f(self);
        let const_continue_scope = self.scopes.const_continuable_scopes.pop().unwrap();
        assert!(const_continue_scope.region_scope == region_scope);

        let break_block = self.build_exit_tree(
            const_continue_scope.const_continue_drops,
            region_scope,
            span,
            None,
        );

        match (normal_exit_block, break_block) {
            (block, None) => block,
            (normal_block, Some(exit_block)) => {
                let target = self.cfg.start_new_block();
                let source_info = self.source_info(span);
                self.cfg.terminate(
                    normal_block.into_block(),
                    source_info,
                    TerminatorKind::Goto { target },
                );
                self.cfg.terminate(
                    exit_block.into_block(),
                    source_info,
                    TerminatorKind::Goto { target },
                );
                target.unit()
            }
        }
    }

    /// Start an if-then scope which tracks drop for `if` expressions and `if`
    /// guards.
    ///
    /// For an if-let chain:
    ///
    /// if let Some(x) = a && let Some(y) = b && let Some(z) = c { ... }
    ///
    /// There are three possible ways the condition can be false and we may have
    /// to drop `x`, `x` and `y`, or neither depending on which binding fails.
    /// To handle this correctly we use a `DropTree` in a similar way to a
    /// `loop` expression and 'break' out on all of the 'else' paths.
    ///
    /// Notes:
    /// - We don't need to keep a stack of scopes in the `Builder` because the
    ///   'else' paths will only leave the innermost scope.
    /// - This is also used for match guards.
    pub(crate) fn in_if_then_scope<F>(
        &mut self,
        region_scope: region::Scope,
        span: Span,
        f: F,
    ) -> (BasicBlock, BasicBlock)
    where
        F: FnOnce(&mut Builder<'a, 'tcx>) -> BlockAnd<()>,
    {
        let scope = IfThenScope { region_scope, else_drops: DropTree::new() };
        let previous_scope = mem::replace(&mut self.scopes.if_then_scope, Some(scope));

        let then_block = f(self).into_block();

        let if_then_scope = mem::replace(&mut self.scopes.if_then_scope, previous_scope).unwrap();
        assert!(if_then_scope.region_scope == region_scope);

        let else_block =
            self.build_exit_tree(if_then_scope.else_drops, region_scope, span, None).map_or_else(
                || self.cfg.start_new_block(),
                |else_block_and| else_block_and.into_block(),
            );

        (then_block, else_block)
    }

    /// Convenience wrapper that pushes a scope and then executes `f`
    /// to build its contents, popping the scope afterwards.
    #[instrument(skip(self, f), level = "debug")]
    pub(crate) fn in_scope<F, R>(
        &mut self,
        region_scope: (region::Scope, SourceInfo),
        lint_level: LintLevel,
        f: F,
    ) -> BlockAnd<R>
    where
        F: FnOnce(&mut Builder<'a, 'tcx>) -> BlockAnd<R>,
    {
        let source_scope = self.source_scope;
        if let LintLevel::Explicit(current_hir_id) = lint_level {
            let parent_id =
                self.source_scopes[source_scope].local_data.as_ref().unwrap_crate_local().lint_root;
            self.maybe_new_source_scope(region_scope.1.span, current_hir_id, parent_id);
        }
        self.push_scope(region_scope);
        let mut block;
        let rv = unpack!(block = f(self));
        block = self.pop_scope(region_scope, block).into_block();
        self.source_scope = source_scope;
        debug!(?block);
        block.and(rv)
    }

    /// Push a scope onto the stack. You can then build code in this
    /// scope and call `pop_scope` afterwards. Note that these two
    /// calls must be paired; using `in_scope` as a convenience
    /// wrapper maybe preferable.
    pub(crate) fn push_scope(&mut self, region_scope: (region::Scope, SourceInfo)) {
        self.scopes.push_scope(region_scope, self.source_scope);
    }

    /// Pops a scope, which should have region scope `region_scope`,
    /// adding any drops onto the end of `block` that are needed.
    /// This must match 1-to-1 with `push_scope`.
    pub(crate) fn pop_scope(
        &mut self,
        region_scope: (region::Scope, SourceInfo),
        mut block: BasicBlock,
    ) -> BlockAnd<()> {
        debug!("pop_scope({:?}, {:?})", region_scope, block);

        block = self.leave_top_scope(block);

        self.scopes.pop_scope(region_scope);

        block.unit()
    }

    /// Sets up the drops for breaking from `block` to `target`.
    pub(crate) fn break_scope(
        &mut self,
        mut block: BasicBlock,
        value: Option<ExprId>,
        target: BreakableTarget,
        source_info: SourceInfo,
    ) -> BlockAnd<()> {
        let span = source_info.span;

        let get_scope_index = |scope: region::Scope| {
            // find the loop-scope by its `region::Scope`.
            self.scopes
                .breakable_scopes
                .iter()
                .rposition(|breakable_scope| breakable_scope.region_scope == scope)
                .unwrap_or_else(|| span_bug!(span, "no enclosing breakable scope found"))
        };
        let (break_index, destination) = match target {
            BreakableTarget::Return => {
                let scope = &self.scopes.breakable_scopes[0];
                if scope.break_destination != Place::return_place() {
                    span_bug!(span, "`return` in item with no return scope");
                }
                (0, Some(scope.break_destination))
            }
            BreakableTarget::Break(scope) => {
                let break_index = get_scope_index(scope);
                let scope = &self.scopes.breakable_scopes[break_index];
                (break_index, Some(scope.break_destination))
            }
            BreakableTarget::Continue(scope) => {
                let break_index = get_scope_index(scope);
                (break_index, None)
            }
        };

        match (destination, value) {
            (Some(destination), Some(value)) => {
                debug!("stmt_expr Break val block_context.push(SubExpr)");
                self.block_context.push(BlockFrame::SubExpr);
                block = self.expr_into_dest(destination, block, value).into_block();
                self.block_context.pop();
            }
            (Some(destination), None) => {
                self.cfg.push_assign_unit(block, source_info, destination, self.tcx)
            }
            (None, Some(_)) => {
                panic!("`return`, `become` and `break` with value and must have a destination")
            }
            (None, None) => {
                if self.tcx.sess.instrument_coverage() {
                    // Normally we wouldn't build any MIR in this case, but that makes it
                    // harder for coverage instrumentation to extract a relevant span for
                    // `continue` expressions. So here we inject a dummy statement with the
                    // desired span.
                    self.cfg.push_coverage_span_marker(block, source_info);
                }
            }
        }

        let region_scope = self.scopes.breakable_scopes[break_index].region_scope;
        let scope_index = self.scopes.scope_index(region_scope, span);
        let drops = if destination.is_some() {
            &mut self.scopes.breakable_scopes[break_index].break_drops
        } else {
            let Some(drops) = self.scopes.breakable_scopes[break_index].continue_drops.as_mut()
            else {
                self.tcx.dcx().span_delayed_bug(
                    source_info.span,
                    "unlabelled `continue` within labelled block",
                );
                self.cfg.terminate(block, source_info, TerminatorKind::Unreachable);

                return self.cfg.start_new_block().unit();
            };
            drops
        };

        let mut drop_idx = ROOT_NODE;
        for scope in &self.scopes.scopes[scope_index + 1..] {
            for drop in &scope.drops {
                drop_idx = drops.add_drop(*drop, drop_idx);
            }
        }
        drops.add_entry_point(block, drop_idx);

        // `build_drop_trees` doesn't have access to our source_info, so we
        // create a dummy terminator now. `TerminatorKind::UnwindResume` is used
        // because MIR type checking will panic if it hasn't been overwritten.
        // (See `<ExitScopes as DropTreeBuilder>::link_entry_point`.)
        self.cfg.terminate(block, source_info, TerminatorKind::UnwindResume);

        self.cfg.start_new_block().unit()
    }

    /// Based on `FunctionCx::eval_unevaluated_mir_constant_to_valtree`.
    fn eval_unevaluated_mir_constant_to_valtree(
        &self,
        constant: ConstOperand<'tcx>,
    ) -> Result<(ty::ValTree<'tcx>, Ty<'tcx>), interpret::ErrorHandled> {
        assert!(!constant.const_.ty().has_param());
        let (uv, ty) = match constant.const_ {
            mir::Const::Unevaluated(uv, ty) => (uv.shrink(), ty),
            mir::Const::Ty(_, c) => match c.kind() {
                // A constant that came from a const generic but was then used as an argument to
                // old-style simd_shuffle (passing as argument instead of as a generic param).
                ty::ConstKind::Value(cv) => return Ok((cv.valtree, cv.ty)),
                other => span_bug!(constant.span, "{other:#?}"),
            },
            mir::Const::Val(mir::ConstValue::Scalar(mir::interpret::Scalar::Int(val)), ty) => {
                return Ok((ValTree::from_scalar_int(self.tcx, val), ty));
            }
            // We should never encounter `Const::Val` unless MIR opts (like const prop) evaluate
            // a constant and write that value back into `Operand`s. This could happen, but is
            // unlikely. Also: all users of `simd_shuffle` are on unstable and already need to take
            // a lot of care around intrinsics. For an issue to happen here, it would require a
            // macro expanding to a `simd_shuffle` call without wrapping the constant argument in a
            // `const {}` block, but the user pass through arbitrary expressions.

            // FIXME(oli-obk): Replace the magic const generic argument of `simd_shuffle` with a
            // real const generic, and get rid of this entire function.
            other => span_bug!(constant.span, "{other:#?}"),
        };

        match self.tcx.const_eval_resolve_for_typeck(self.typing_env(), uv, constant.span) {
            Ok(Ok(valtree)) => Ok((valtree, ty)),
            Ok(Err(ty)) => span_bug!(constant.span, "could not convert {ty:?} to a valtree"),
            Err(e) => Err(e),
        }
    }

    /// Sets up the drops for jumping from `block` to `scope`.
    pub(crate) fn break_const_continuable_scope(
        &mut self,
        mut block: BasicBlock,
        value: ExprId,
        scope: region::Scope,
        source_info: SourceInfo,
    ) -> BlockAnd<()> {
        let span = source_info.span;

        // A break can only break out of a scope, so the value should be a scope.
        let rustc_middle::thir::ExprKind::Scope { value, .. } = self.thir[value].kind else {
            span_bug!(span, "break value must be a scope")
        };

        let constant = match &self.thir[value].kind {
            ExprKind::Adt(box AdtExpr { variant_index, fields, base, .. }) => {
                assert!(matches!(base, AdtExprBase::None));
                assert!(fields.is_empty());
                ConstOperand {
                    span: self.thir[value].span,
                    user_ty: None,
                    const_: Const::Ty(
                        self.thir[value].ty,
                        ty::Const::new_value(
                            self.tcx,
                            ValTree::from_branches(
                                self.tcx,
                                [ValTree::from_scalar_int(self.tcx, variant_index.as_u32().into())],
                            ),
                            self.thir[value].ty,
                        ),
                    ),
                }
            }
            _ => self.as_constant(&self.thir[value]),
        };

        let break_index = self
            .scopes
            .const_continuable_scopes
            .iter()
            .rposition(|const_continuable_scope| const_continuable_scope.region_scope == scope)
            .unwrap_or_else(|| span_bug!(span, "no enclosing const-continuable scope found"));

        let scope = &self.scopes.const_continuable_scopes[break_index];

        let state_decl = &self.local_decls[scope.state_place.as_local().unwrap()];
        let state_ty = state_decl.ty;
        let (discriminant_ty, rvalue) = match state_ty.kind() {
            ty::Adt(adt_def, _) if adt_def.is_enum() => {
                (state_ty.discriminant_ty(self.tcx), Rvalue::Discriminant(scope.state_place))
            }
            ty::Uint(_) | ty::Int(_) | ty::Float(_) | ty::Bool | ty::Char => {
                (state_ty, Rvalue::Use(Operand::Copy(scope.state_place)))
            }
            _ => span_bug!(state_decl.source_info.span, "unsupported #[loop_match] state"),
        };

        // The `PatCtxt` is normally used in pattern exhaustiveness checking, but reused
        // here because it performs normalization and const evaluation.
        let dropless_arena = rustc_arena::DroplessArena::default();
        let typeck_results = self.tcx.typeck(self.def_id);
        let cx = RustcPatCtxt {
            tcx: self.tcx,
            typeck_results,
            module: self.tcx.parent_module(self.hir_id).to_def_id(),
            // FIXME(#132279): We're in a body, should handle opaques.
            typing_env: rustc_middle::ty::TypingEnv::non_body_analysis(self.tcx, self.def_id),
            dropless_arena: &dropless_arena,
            match_lint_level: self.hir_id,
            whole_match_span: Some(rustc_span::Span::default()),
            scrut_span: rustc_span::Span::default(),
            refutable: true,
            known_valid_scrutinee: true,
            internal_state: Default::default(),
        };

        let valtree = match self.eval_unevaluated_mir_constant_to_valtree(constant) {
            Ok((valtree, ty)) => {
                // Defensively check that the type is monomorphic.
                assert!(!ty.has_param());

                valtree
            }
            Err(ErrorHandled::Reported(..)) => {
                return block.unit();
            }
            Err(ErrorHandled::TooGeneric(_)) => {
                self.tcx.dcx().emit_fatal(ConstContinueBadConst { span: constant.span });
            }
        };

        let Some(real_target) =
            self.static_pattern_match(&cx, valtree, &*scope.arms, &scope.built_match_tree)
        else {
            self.tcx.dcx().emit_fatal(ConstContinueUnknownJumpTarget { span })
        };

        self.block_context.push(BlockFrame::SubExpr);
        let state_place = scope.state_place;
        block = self.expr_into_dest(state_place, block, value).into_block();
        self.block_context.pop();

        let discr = self.temp(discriminant_ty, source_info.span);
        let scope_index = self
            .scopes
            .scope_index(self.scopes.const_continuable_scopes[break_index].region_scope, span);
        let scope = &mut self.scopes.const_continuable_scopes[break_index];
        self.cfg.push_assign(block, source_info, discr, rvalue);
        let drop_and_continue_block = self.cfg.start_new_block();
        let imaginary_target = self.cfg.start_new_block();
        self.cfg.terminate(
            block,
            source_info,
            TerminatorKind::FalseEdge { real_target: drop_and_continue_block, imaginary_target },
        );

        let drops = &mut scope.const_continue_drops;

        let drop_idx = self.scopes.scopes[scope_index + 1..]
            .iter()
            .flat_map(|scope| &scope.drops)
            .fold(ROOT_NODE, |drop_idx, &drop| drops.add_drop(drop, drop_idx));

        drops.add_entry_point(imaginary_target, drop_idx);

        self.cfg.terminate(imaginary_target, source_info, TerminatorKind::UnwindResume);

        let region_scope = scope.region_scope;
        let scope_index = self.scopes.scope_index(region_scope, span);
        let mut drops = DropTree::new();

        let drop_idx = self.scopes.scopes[scope_index + 1..]
            .iter()
            .flat_map(|scope| &scope.drops)
            .fold(ROOT_NODE, |drop_idx, &drop| drops.add_drop(drop, drop_idx));

        drops.add_entry_point(drop_and_continue_block, drop_idx);

        // `build_drop_trees` doesn't have access to our source_info, so we
        // create a dummy terminator now. `TerminatorKind::UnwindResume` is used
        // because MIR type checking will panic if it hasn't been overwritten.
        // (See `<ExitScopes as DropTreeBuilder>::link_entry_point`.)
        self.cfg.terminate(drop_and_continue_block, source_info, TerminatorKind::UnwindResume);

        self.build_exit_tree(drops, region_scope, span, Some(real_target));

        return self.cfg.start_new_block().unit();
    }

    /// Sets up the drops for breaking from `block` due to an `if` condition
    /// that turned out to be false.
    ///
    /// Must be called in the context of [`Builder::in_if_then_scope`], so that
    /// there is an if-then scope to tell us what the target scope is.
    pub(crate) fn break_for_else(&mut self, block: BasicBlock, source_info: SourceInfo) {
        let if_then_scope = self
            .scopes
            .if_then_scope
            .as_ref()
            .unwrap_or_else(|| span_bug!(source_info.span, "no if-then scope found"));

        let target = if_then_scope.region_scope;
        let scope_index = self.scopes.scope_index(target, source_info.span);

        // Upgrade `if_then_scope` to `&mut`.
        let if_then_scope = self.scopes.if_then_scope.as_mut().expect("upgrading & to &mut");

        let mut drop_idx = ROOT_NODE;
        let drops = &mut if_then_scope.else_drops;
        for scope in &self.scopes.scopes[scope_index + 1..] {
            for drop in &scope.drops {
                drop_idx = drops.add_drop(*drop, drop_idx);
            }
        }
        drops.add_entry_point(block, drop_idx);

        // `build_drop_trees` doesn't have access to our source_info, so we
        // create a dummy terminator now. `TerminatorKind::UnwindResume` is used
        // because MIR type checking will panic if it hasn't been overwritten.
        // (See `<ExitScopes as DropTreeBuilder>::link_entry_point`.)
        self.cfg.terminate(block, source_info, TerminatorKind::UnwindResume);
    }

    /// Sets up the drops for explicit tail calls.
    ///
    /// Unlike other kinds of early exits, tail calls do not go through the drop tree.
    /// Instead, all scheduled drops are immediately added to the CFG.
    pub(crate) fn break_for_tail_call(
        &mut self,
        mut block: BasicBlock,
        args: &[Spanned<Operand<'tcx>>],
        source_info: SourceInfo,
    ) -> BlockAnd<()> {
        let arg_drops: Vec<_> = args
            .iter()
            .rev()
            .filter_map(|arg| match &arg.node {
                Operand::Copy(_) => bug!("copy op in tail call args"),
                Operand::Move(place) => {
                    let local =
                        place.as_local().unwrap_or_else(|| bug!("projection in tail call args"));

                    if !self.local_decls[local].ty.needs_drop(self.tcx, self.typing_env()) {
                        return None;
                    }

                    Some(DropData { source_info, local, kind: DropKind::Value })
                }
                Operand::Constant(_) => None,
            })
            .collect();

        let mut unwind_to = self.diverge_cleanup_target(
            self.scopes.scopes.iter().rev().nth(1).unwrap().region_scope,
            DUMMY_SP,
        );
        let typing_env = self.typing_env();
        let unwind_drops = &mut self.scopes.unwind_drops;

        // the innermost scope contains only the destructors for the tail call arguments
        // we only want to drop these in case of a panic, so we skip it
        for scope in self.scopes.scopes[1..].iter().rev().skip(1) {
            // FIXME(explicit_tail_calls) code duplication with `build_scope_drops`
            for drop_data in scope.drops.iter().rev() {
                let source_info = drop_data.source_info;
                let local = drop_data.local;

                if !self.local_decls[local].ty.needs_drop(self.tcx, typing_env) {
                    continue;
                }

                match drop_data.kind {
                    DropKind::Value => {
                        // `unwind_to` should drop the value that we're about to
                        // schedule. If dropping this value panics, then we continue
                        // with the *next* value on the unwind path.
                        debug_assert_eq!(
                            unwind_drops.drop_nodes[unwind_to].data.local,
                            drop_data.local
                        );
                        debug_assert_eq!(
                            unwind_drops.drop_nodes[unwind_to].data.kind,
                            drop_data.kind
                        );
                        unwind_to = unwind_drops.drop_nodes[unwind_to].next;

                        let mut unwind_entry_point = unwind_to;

                        // the tail call arguments must be dropped if any of these drops panic
                        for drop in arg_drops.iter().copied() {
                            unwind_entry_point = unwind_drops.add_drop(drop, unwind_entry_point);
                        }

                        unwind_drops.add_entry_point(block, unwind_entry_point);

                        let next = self.cfg.start_new_block();
                        self.cfg.terminate(
                            block,
                            source_info,
                            TerminatorKind::Drop {
                                place: local.into(),
                                target: next,
                                unwind: UnwindAction::Continue,
                                replace: false,
                                drop: None,
                                async_fut: None,
                            },
                        );
                        block = next;
                    }
                    DropKind::ForLint => {
                        self.cfg.push(
                            block,
                            Statement::new(
                                source_info,
                                StatementKind::BackwardIncompatibleDropHint {
                                    place: Box::new(local.into()),
                                    reason: BackwardIncompatibleDropReason::Edition2024,
                                },
                            ),
                        );
                    }
                    DropKind::Storage => {
                        // Only temps and vars need their storage dead.
                        assert!(local.index() > self.arg_count);
                        self.cfg.push(
                            block,
                            Statement::new(source_info, StatementKind::StorageDead(local)),
                        );
                    }
                }
            }
        }

        block.unit()
    }

    fn is_async_drop_impl(
        tcx: TyCtxt<'tcx>,
        local_decls: &IndexVec<Local, LocalDecl<'tcx>>,
        typing_env: ty::TypingEnv<'tcx>,
        local: Local,
    ) -> bool {
        let ty = local_decls[local].ty;
        if ty.is_async_drop(tcx, typing_env) || ty.is_coroutine() {
            return true;
        }
        ty.needs_async_drop(tcx, typing_env)
    }
    fn is_async_drop(&self, local: Local) -> bool {
        Self::is_async_drop_impl(self.tcx, &self.local_decls, self.typing_env(), local)
    }

    fn leave_top_scope(&mut self, block: BasicBlock) -> BasicBlock {
        // If we are emitting a `drop` statement, we need to have the cached
        // diverge cleanup pads ready in case that drop panics.
        let needs_cleanup = self.scopes.scopes.last().is_some_and(|scope| scope.needs_cleanup());
        let is_coroutine = self.coroutine.is_some();
        let unwind_to = if needs_cleanup { self.diverge_cleanup() } else { DropIdx::MAX };

        let scope = self.scopes.scopes.last().expect("leave_top_scope called with no scopes");
        let has_async_drops = is_coroutine
            && scope.drops.iter().any(|v| v.kind == DropKind::Value && self.is_async_drop(v.local));
        let dropline_to = if has_async_drops { Some(self.diverge_dropline()) } else { None };
        let scope = self.scopes.scopes.last().expect("leave_top_scope called with no scopes");
        let typing_env = self.typing_env();
        build_scope_drops(
            &mut self.cfg,
            &mut self.scopes.unwind_drops,
            &mut self.scopes.coroutine_drops,
            scope,
            block,
            unwind_to,
            dropline_to,
            is_coroutine && needs_cleanup,
            self.arg_count,
            |v: Local| Self::is_async_drop_impl(self.tcx, &self.local_decls, typing_env, v),
        )
        .into_block()
    }

    /// Possibly creates a new source scope if `current_root` and `parent_root`
    /// are different, or if -Zmaximal-hir-to-mir-coverage is enabled.
    pub(crate) fn maybe_new_source_scope(
        &mut self,
        span: Span,
        current_id: HirId,
        parent_id: HirId,
    ) {
        let (current_root, parent_root) =
            if self.tcx.sess.opts.unstable_opts.maximal_hir_to_mir_coverage {
                // Some consumers of rustc need to map MIR locations back to HIR nodes. Currently
                // the only part of rustc that tracks MIR -> HIR is the
                // `SourceScopeLocalData::lint_root` field that tracks lint levels for MIR
                // locations. Normally the number of source scopes is limited to the set of nodes
                // with lint annotations. The -Zmaximal-hir-to-mir-coverage flag changes this
                // behavior to maximize the number of source scopes, increasing the granularity of
                // the MIR->HIR mapping.
                (current_id, parent_id)
            } else {
                // Use `maybe_lint_level_root_bounded` to avoid adding Hir dependencies on our
                // parents. We estimate the true lint roots here to avoid creating a lot of source
                // scopes.
                (
                    self.maybe_lint_level_root_bounded(current_id),
                    if parent_id == self.hir_id {
                        parent_id // this is very common
                    } else {
                        self.maybe_lint_level_root_bounded(parent_id)
                    },
                )
            };

        if current_root != parent_root {
            let lint_level = LintLevel::Explicit(current_root);
            self.source_scope = self.new_source_scope(span, lint_level);
        }
    }

    /// Walks upwards from `orig_id` to find a node which might change lint levels with attributes.
    /// It stops at `self.hir_id` and just returns it if reached.
    fn maybe_lint_level_root_bounded(&mut self, orig_id: HirId) -> HirId {
        // This assertion lets us just store `ItemLocalId` in the cache, rather
        // than the full `HirId`.
        assert_eq!(orig_id.owner, self.hir_id.owner);

        let mut id = orig_id;
        loop {
            if id == self.hir_id {
                // This is a moderately common case, mostly hit for previously unseen nodes.
                break;
            }

            if self.tcx.hir_attrs(id).iter().any(|attr| Level::from_attr(attr).is_some()) {
                // This is a rare case. It's for a node path that doesn't reach the root due to an
                // intervening lint level attribute. This result doesn't get cached.
                return id;
            }

            let next = self.tcx.parent_hir_id(id);
            if next == id {
                bug!("lint traversal reached the root of the crate");
            }
            id = next;

            // This lookup is just an optimization; it can be removed without affecting
            // functionality. It might seem strange to see this at the end of this loop, but the
            // `orig_id` passed in to this function is almost always previously unseen, for which a
            // lookup will be a miss. So we only do lookups for nodes up the parent chain, where
            // cache lookups have a very high hit rate.
            if self.lint_level_roots_cache.contains(id.local_id) {
                break;
            }
        }

        // `orig_id` traced to `self_id`; record this fact. If `orig_id` is a leaf node it will
        // rarely (never?) subsequently be searched for, but it's hard to know if that is the case.
        // The performance wins from the cache all come from caching non-leaf nodes.
        self.lint_level_roots_cache.insert(orig_id.local_id);
        self.hir_id
    }

    /// Creates a new source scope, nested in the current one.
    pub(crate) fn new_source_scope(&mut self, span: Span, lint_level: LintLevel) -> SourceScope {
        let parent = self.source_scope;
        debug!(
            "new_source_scope({:?}, {:?}) - parent({:?})={:?}",
            span,
            lint_level,
            parent,
            self.source_scopes.get(parent)
        );
        let scope_local_data = SourceScopeLocalData {
            lint_root: if let LintLevel::Explicit(lint_root) = lint_level {
                lint_root
            } else {
                self.source_scopes[parent].local_data.as_ref().unwrap_crate_local().lint_root
            },
        };
        self.source_scopes.push(SourceScopeData {
            span,
            parent_scope: Some(parent),
            inlined: None,
            inlined_parent_scope: None,
            local_data: ClearCrossCrate::Set(scope_local_data),
        })
    }

    /// Given a span and the current source scope, make a SourceInfo.
    pub(crate) fn source_info(&self, span: Span) -> SourceInfo {
        SourceInfo { span, scope: self.source_scope }
    }

    // Finding scopes
    // ==============

    /// Returns the scope that we should use as the lifetime of an
    /// operand. Basically, an operand must live until it is consumed.
    /// This is similar to, but not quite the same as, the temporary
    /// scope (which can be larger or smaller).
    ///
    /// Consider:
    /// ```ignore (illustrative)
    /// let x = foo(bar(X, Y));
    /// ```
    /// We wish to pop the storage for X and Y after `bar()` is
    /// called, not after the whole `let` is completed.
    ///
    /// As another example, if the second argument diverges:
    /// ```ignore (illustrative)
    /// foo(Box::new(2), panic!())
    /// ```
    /// We would allocate the box but then free it on the unwinding
    /// path; we would also emit a free on the 'success' path from
    /// panic, but that will turn out to be removed as dead-code.
    pub(crate) fn local_scope(&self) -> region::Scope {
        self.scopes.topmost()
    }

    // Scheduling drops
    // ================

    pub(crate) fn schedule_drop_storage_and_value(
        &mut self,
        span: Span,
        region_scope: region::Scope,
        local: Local,
    ) {
        self.schedule_drop(span, region_scope, local, DropKind::Storage);
        self.schedule_drop(span, region_scope, local, DropKind::Value);
    }

    /// Indicates that `place` should be dropped on exit from `region_scope`.
    ///
    /// When called with `DropKind::Storage`, `place` shouldn't be the return
    /// place, or a function parameter.
    pub(crate) fn schedule_drop(
        &mut self,
        span: Span,
        region_scope: region::Scope,
        local: Local,
        drop_kind: DropKind,
    ) {
        let needs_drop = match drop_kind {
            DropKind::Value | DropKind::ForLint => {
                if !self.local_decls[local].ty.needs_drop(self.tcx, self.typing_env()) {
                    return;
                }
                true
            }
            DropKind::Storage => {
                if local.index() <= self.arg_count {
                    span_bug!(
                        span,
                        "`schedule_drop` called with body argument {:?} \
                        but its storage does not require a drop",
                        local,
                    )
                }
                false
            }
        };

        // When building drops, we try to cache chains of drops to reduce the
        // number of `DropTree::add_drop` calls. This, however, means that
        // whenever we add a drop into a scope which already had some entries
        // in the drop tree built (and thus, cached) for it, we must invalidate
        // all caches which might branch into the scope which had a drop just
        // added to it. This is necessary, because otherwise some other code
        // might use the cache to branch into already built chain of drops,
        // essentially ignoring the newly added drop.
        //
        // For example consider there’s two scopes with a drop in each. These
        // are built and thus the caches are filled:
        //
        // +--------------------------------------------------------+
        // | +---------------------------------+                    |
        // | | +--------+     +-------------+  |  +---------------+ |
        // | | | return | <-+ | drop(outer) | <-+ |  drop(middle) | |
        // | | +--------+     +-------------+  |  +---------------+ |
        // | +------------|outer_scope cache|--+                    |
        // +------------------------------|middle_scope cache|------+
        //
        // Now, a new, innermost scope is added along with a new drop into
        // both innermost and outermost scopes:
        //
        // +------------------------------------------------------------+
        // | +----------------------------------+                       |
        // | | +--------+      +-------------+  |   +---------------+   | +-------------+
        // | | | return | <+   | drop(new)   | <-+  |  drop(middle) | <--+| drop(inner) |
        // | | +--------+  |   | drop(outer) |  |   +---------------+   | +-------------+
        // | |             +-+ +-------------+  |                       |
        // | +---|invalid outer_scope cache|----+                       |
        // +----=----------------|invalid middle_scope cache|-----------+
        //
        // If, when adding `drop(new)` we do not invalidate the cached blocks for both
        // outer_scope and middle_scope, then, when building drops for the inner (rightmost)
        // scope, the old, cached blocks, without `drop(new)` will get used, producing the
        // wrong results.
        //
        // Note that this code iterates scopes from the innermost to the outermost,
        // invalidating caches of each scope visited. This way bare minimum of the
        // caches gets invalidated. i.e., if a new drop is added into the middle scope, the
        // cache of outer scope stays intact.
        //
        // Since we only cache drops for the unwind path and the coroutine drop
        // path, we only need to invalidate the cache for drops that happen on
        // the unwind or coroutine drop paths. This means that for
        // non-coroutines we don't need to invalidate caches for `DropKind::Storage`.
        let invalidate_caches = needs_drop || self.coroutine.is_some();
        for scope in self.scopes.scopes.iter_mut().rev() {
            if invalidate_caches {
                scope.invalidate_cache();
            }

            if scope.region_scope == region_scope {
                let region_scope_span = region_scope.span(self.tcx, self.region_scope_tree);
                // Attribute scope exit drops to scope's closing brace.
                let scope_end = self.tcx.sess.source_map().end_point(region_scope_span);

                scope.drops.push(DropData {
                    source_info: SourceInfo { span: scope_end, scope: scope.source_scope },
                    local,
                    kind: drop_kind,
                });

                return;
            }
        }

        span_bug!(span, "region scope {:?} not in scope to drop {:?}", region_scope, local);
    }

    /// Schedule emission of a backwards incompatible drop lint hint.
    /// Applicable only to temporary values for now.
    #[instrument(level = "debug", skip(self))]
    pub(crate) fn schedule_backwards_incompatible_drop(
        &mut self,
        span: Span,
        region_scope: region::Scope,
        local: Local,
    ) {
        // Note that we are *not* gating BIDs here on whether they have significant destructor.
        // We need to know all of them so that we can capture potential borrow-checking errors.
        for scope in self.scopes.scopes.iter_mut().rev() {
            // Since we are inserting linting MIR statement, we have to invalidate the caches
            scope.invalidate_cache();
            if scope.region_scope == region_scope {
                let region_scope_span = region_scope.span(self.tcx, self.region_scope_tree);
                let scope_end = self.tcx.sess.source_map().end_point(region_scope_span);

                scope.drops.push(DropData {
                    source_info: SourceInfo { span: scope_end, scope: scope.source_scope },
                    local,
                    kind: DropKind::ForLint,
                });

                return;
            }
        }
        span_bug!(
            span,
            "region scope {:?} not in scope to drop {:?} for linting",
            region_scope,
            local
        );
    }

    /// Indicates that the "local operand" stored in `local` is
    /// *moved* at some point during execution (see `local_scope` for
    /// more information about what a "local operand" is -- in short,
    /// it's an intermediate operand created as part of preparing some
    /// MIR instruction). We use this information to suppress
    /// redundant drops on the non-unwind paths. This results in less
    /// MIR, but also avoids spurious borrow check errors
    /// (c.f. #64391).
    ///
    /// Example: when compiling the call to `foo` here:
    ///
    /// ```ignore (illustrative)
    /// foo(bar(), ...)
    /// ```
    ///
    /// we would evaluate `bar()` to an operand `_X`. We would also
    /// schedule `_X` to be dropped when the expression scope for
    /// `foo(bar())` is exited. This is relevant, for example, if the
    /// later arguments should unwind (it would ensure that `_X` gets
    /// dropped). However, if no unwind occurs, then `_X` will be
    /// unconditionally consumed by the `call`:
    ///
    /// ```ignore (illustrative)
    /// bb {
    ///   ...
    ///   _R = CALL(foo, _X, ...)
    /// }
    /// ```
    ///
    /// However, `_X` is still registered to be dropped, and so if we
    /// do nothing else, we would generate a `DROP(_X)` that occurs
    /// after the call. This will later be optimized out by the
    /// drop-elaboration code, but in the meantime it can lead to
    /// spurious borrow-check errors -- the problem, ironically, is
    /// not the `DROP(_X)` itself, but the (spurious) unwind pathways
    /// that it creates. See #64391 for an example.
    pub(crate) fn record_operands_moved(&mut self, operands: &[Spanned<Operand<'tcx>>]) {
        let local_scope = self.local_scope();
        let scope = self.scopes.scopes.last_mut().unwrap();

        assert_eq!(scope.region_scope, local_scope, "local scope is not the topmost scope!",);

        // look for moves of a local variable, like `MOVE(_X)`
        let locals_moved = operands.iter().flat_map(|operand| match operand.node {
            Operand::Copy(_) | Operand::Constant(_) => None,
            Operand::Move(place) => place.as_local(),
        });

        for local in locals_moved {
            // check if we have a Drop for this operand and -- if so
            // -- add it to the list of moved operands. Note that this
            // local might not have been an operand created for this
            // call, it could come from other places too.
            if scope.drops.iter().any(|drop| drop.local == local && drop.kind == DropKind::Value) {
                scope.moved_locals.push(local);
            }
        }
    }

    // Other
    // =====

    /// Returns the [DropIdx] for the innermost drop if the function unwound at
    /// this point. The `DropIdx` will be created if it doesn't already exist.
    fn diverge_cleanup(&mut self) -> DropIdx {
        // It is okay to use dummy span because the getting scope index on the topmost scope
        // must always succeed.
        self.diverge_cleanup_target(self.scopes.topmost(), DUMMY_SP)
    }

    /// This is similar to [diverge_cleanup](Self::diverge_cleanup) except its target is set to
    /// some ancestor scope instead of the current scope.
    /// It is possible to unwind to some ancestor scope if some drop panics as
    /// the program breaks out of a if-then scope.
    fn diverge_cleanup_target(&mut self, target_scope: region::Scope, span: Span) -> DropIdx {
        let target = self.scopes.scope_index(target_scope, span);
        let (uncached_scope, mut cached_drop) = self.scopes.scopes[..=target]
            .iter()
            .enumerate()
            .rev()
            .find_map(|(scope_idx, scope)| {
                scope.cached_unwind_block.map(|cached_block| (scope_idx + 1, cached_block))
            })
            .unwrap_or((0, ROOT_NODE));

        if uncached_scope > target {
            return cached_drop;
        }

        let is_coroutine = self.coroutine.is_some();
        for scope in &mut self.scopes.scopes[uncached_scope..=target] {
            for drop in &scope.drops {
                if is_coroutine || drop.kind == DropKind::Value {
                    cached_drop = self.scopes.unwind_drops.add_drop(*drop, cached_drop);
                }
            }
            scope.cached_unwind_block = Some(cached_drop);
        }

        cached_drop
    }

    /// Prepares to create a path that performs all required cleanup for a
    /// terminator that can unwind at the given basic block.
    ///
    /// This path terminates in Resume. The path isn't created until after all
    /// of the non-unwind paths in this item have been lowered.
    pub(crate) fn diverge_from(&mut self, start: BasicBlock) {
        debug_assert!(
            matches!(
                self.cfg.block_data(start).terminator().kind,
                TerminatorKind::Assert { .. }
                    | TerminatorKind::Call { .. }
                    | TerminatorKind::Drop { .. }
                    | TerminatorKind::FalseUnwind { .. }
                    | TerminatorKind::InlineAsm { .. }
            ),
            "diverge_from called on block with terminator that cannot unwind."
        );

        let next_drop = self.diverge_cleanup();
        self.scopes.unwind_drops.add_entry_point(start, next_drop);
    }

    /// Returns the [DropIdx] for the innermost drop for dropline (coroutine drop path).
    /// The `DropIdx` will be created if it doesn't already exist.
    fn diverge_dropline(&mut self) -> DropIdx {
        // It is okay to use dummy span because the getting scope index on the topmost scope
        // must always succeed.
        self.diverge_dropline_target(self.scopes.topmost(), DUMMY_SP)
    }

    /// Similar to diverge_cleanup_target, but for dropline (coroutine drop path)
    fn diverge_dropline_target(&mut self, target_scope: region::Scope, span: Span) -> DropIdx {
        debug_assert!(
            self.coroutine.is_some(),
            "diverge_dropline_target is valid only for coroutine"
        );
        let target = self.scopes.scope_index(target_scope, span);
        let (uncached_scope, mut cached_drop) = self.scopes.scopes[..=target]
            .iter()
            .enumerate()
            .rev()
            .find_map(|(scope_idx, scope)| {
                scope.cached_coroutine_drop_block.map(|cached_block| (scope_idx + 1, cached_block))
            })
            .unwrap_or((0, ROOT_NODE));

        if uncached_scope > target {
            return cached_drop;
        }

        for scope in &mut self.scopes.scopes[uncached_scope..=target] {
            for drop in &scope.drops {
                cached_drop = self.scopes.coroutine_drops.add_drop(*drop, cached_drop);
            }
            scope.cached_coroutine_drop_block = Some(cached_drop);
        }

        cached_drop
    }

    /// Sets up a path that performs all required cleanup for dropping a
    /// coroutine, starting from the given block that ends in
    /// [TerminatorKind::Yield].
    ///
    /// This path terminates in CoroutineDrop.
    pub(crate) fn coroutine_drop_cleanup(&mut self, yield_block: BasicBlock) {
        debug_assert!(
            matches!(
                self.cfg.block_data(yield_block).terminator().kind,
                TerminatorKind::Yield { .. }
            ),
            "coroutine_drop_cleanup called on block with non-yield terminator."
        );
        let cached_drop = self.diverge_dropline();
        self.scopes.coroutine_drops.add_entry_point(yield_block, cached_drop);
    }

    /// Utility function for *non*-scope code to build their own drops
    /// Force a drop at this point in the MIR by creating a new block.
    pub(crate) fn build_drop_and_replace(
        &mut self,
        block: BasicBlock,
        span: Span,
        place: Place<'tcx>,
        value: Rvalue<'tcx>,
    ) -> BlockAnd<()> {
        let source_info = self.source_info(span);

        // create the new block for the assignment
        let assign = self.cfg.start_new_block();
        self.cfg.push_assign(assign, source_info, place, value.clone());

        // create the new block for the assignment in the case of unwinding
        let assign_unwind = self.cfg.start_new_cleanup_block();
        self.cfg.push_assign(assign_unwind, source_info, place, value.clone());

        self.cfg.terminate(
            block,
            source_info,
            TerminatorKind::Drop {
                place,
                target: assign,
                unwind: UnwindAction::Cleanup(assign_unwind),
                replace: true,
                drop: None,
                async_fut: None,
            },
        );
        self.diverge_from(block);

        assign.unit()
    }

    /// Creates an `Assert` terminator and return the success block.
    /// If the boolean condition operand is not the expected value,
    /// a runtime panic will be caused with the given message.
    pub(crate) fn assert(
        &mut self,
        block: BasicBlock,
        cond: Operand<'tcx>,
        expected: bool,
        msg: AssertMessage<'tcx>,
        span: Span,
    ) -> BasicBlock {
        let source_info = self.source_info(span);
        let success_block = self.cfg.start_new_block();

        self.cfg.terminate(
            block,
            source_info,
            TerminatorKind::Assert {
                cond,
                expected,
                msg: Box::new(msg),
                target: success_block,
                unwind: UnwindAction::Continue,
            },
        );
        self.diverge_from(block);

        success_block
    }

    /// Unschedules any drops in the top scope.
    ///
    /// This is only needed for `match` arm scopes, because they have one
    /// entrance per pattern, but only one exit.
    pub(crate) fn clear_top_scope(&mut self, region_scope: region::Scope) {
        let top_scope = self.scopes.scopes.last_mut().unwrap();

        assert_eq!(top_scope.region_scope, region_scope);

        top_scope.drops.clear();
        top_scope.invalidate_cache();
    }
}

/// Builds drops for `pop_scope` and `leave_top_scope`.
///
/// # Parameters
///
/// * `unwind_drops`, the drop tree data structure storing what needs to be cleaned up if unwind occurs
/// * `scope`, describes the drops that will occur on exiting the scope in regular execution
/// * `block`, the block to branch to once drops are complete (assuming no unwind occurs)
/// * `unwind_to`, describes the drops that would occur at this point in the code if a
///   panic occurred (a subset of the drops in `scope`, since we sometimes elide StorageDead and other
///   instructions on unwinding)
/// * `dropline_to`, describes the drops that would occur at this point in the code if a
///    coroutine drop occurred.
/// * `storage_dead_on_unwind`, if true, then we should emit `StorageDead` even when unwinding
/// * `arg_count`, number of MIR local variables corresponding to fn arguments (used to assert that we don't drop those)
fn build_scope_drops<'tcx, F>(
    cfg: &mut CFG<'tcx>,
    unwind_drops: &mut DropTree,
    coroutine_drops: &mut DropTree,
    scope: &Scope,
    block: BasicBlock,
    unwind_to: DropIdx,
    dropline_to: Option<DropIdx>,
    storage_dead_on_unwind: bool,
    arg_count: usize,
    is_async_drop: F,
) -> BlockAnd<()>
where
    F: Fn(Local) -> bool,
{
    debug!("build_scope_drops({:?} -> {:?}), dropline_to={:?}", block, scope, dropline_to);

    // Build up the drops in evaluation order. The end result will
    // look like:
    //
    // [SDs, drops[n]] --..> [SDs, drop[1]] -> [SDs, drop[0]] -> [[SDs]]
    //               |                    |                 |
    //               :                    |                 |
    //                                    V                 V
    // [drop[n]] -...-> [drop[1]] ------> [drop[0]] ------> [last_unwind_to]
    //
    // The horizontal arrows represent the execution path when the drops return
    // successfully. The downwards arrows represent the execution path when the
    // drops panic (panicking while unwinding will abort, so there's no need for
    // another set of arrows).
    //
    // For coroutines, we unwind from a drop on a local to its StorageDead
    // statement. For other functions we don't worry about StorageDead. The
    // drops for the unwind path should have already been generated by
    // `diverge_cleanup_gen`.

    // `unwind_to` indicates what needs to be dropped should unwinding occur.
    // This is a subset of what needs to be dropped when exiting the scope.
    // As we unwind the scope, we will also move `unwind_to` backwards to match,
    // so that we can use it should a destructor panic.
    let mut unwind_to = unwind_to;

    // The block that we should jump to after drops complete. We start by building the final drop (`drops[n]`
    // in the diagram above) and then build the drops (e.g., `drop[1]`, `drop[0]`) that come before it.
    // block begins as the successor of `drops[n]` and then becomes `drops[n]` so that `drops[n-1]`
    // will branch to `drops[n]`.
    let mut block = block;

    // `dropline_to` indicates what needs to be dropped should coroutine drop occur.
    let mut dropline_to = dropline_to;

    for drop_data in scope.drops.iter().rev() {
        let source_info = drop_data.source_info;
        let local = drop_data.local;

        match drop_data.kind {
            DropKind::Value => {
                // `unwind_to` should drop the value that we're about to
                // schedule. If dropping this value panics, then we continue
                // with the *next* value on the unwind path.
                //
                // We adjust this BEFORE we create the drop (e.g., `drops[n]`)
                // because `drops[n]` should unwind to `drops[n-1]`.
                debug_assert_eq!(unwind_drops.drop_nodes[unwind_to].data.local, drop_data.local);
                debug_assert_eq!(unwind_drops.drop_nodes[unwind_to].data.kind, drop_data.kind);
                unwind_to = unwind_drops.drop_nodes[unwind_to].next;

                if let Some(idx) = dropline_to {
                    debug_assert_eq!(coroutine_drops.drop_nodes[idx].data.local, drop_data.local);
                    debug_assert_eq!(coroutine_drops.drop_nodes[idx].data.kind, drop_data.kind);
                    dropline_to = Some(coroutine_drops.drop_nodes[idx].next);
                }

                // If the operand has been moved, and we are not on an unwind
                // path, then don't generate the drop. (We only take this into
                // account for non-unwind paths so as not to disturb the
                // caching mechanism.)
                if scope.moved_locals.contains(&local) {
                    continue;
                }

                unwind_drops.add_entry_point(block, unwind_to);
                if let Some(to) = dropline_to
                    && is_async_drop(local)
                {
                    coroutine_drops.add_entry_point(block, to);
                }

                let next = cfg.start_new_block();
                cfg.terminate(
                    block,
                    source_info,
                    TerminatorKind::Drop {
                        place: local.into(),
                        target: next,
                        unwind: UnwindAction::Continue,
                        replace: false,
                        drop: None,
                        async_fut: None,
                    },
                );
                block = next;
            }
            DropKind::ForLint => {
                // As in the `DropKind::Storage` case below:
                // normally lint-related drops are not emitted for unwind,
                // so we can just leave `unwind_to` unmodified, but in some
                // cases we emit things ALSO on the unwind path, so we need to adjust
                // `unwind_to` in that case.
                if storage_dead_on_unwind {
                    debug_assert_eq!(
                        unwind_drops.drop_nodes[unwind_to].data.local,
                        drop_data.local
                    );
                    debug_assert_eq!(unwind_drops.drop_nodes[unwind_to].data.kind, drop_data.kind);
                    unwind_to = unwind_drops.drop_nodes[unwind_to].next;
                }

                // If the operand has been moved, and we are not on an unwind
                // path, then don't generate the drop. (We only take this into
                // account for non-unwind paths so as not to disturb the
                // caching mechanism.)
                if scope.moved_locals.contains(&local) {
                    continue;
                }

                cfg.push(
                    block,
                    Statement::new(
                        source_info,
                        StatementKind::BackwardIncompatibleDropHint {
                            place: Box::new(local.into()),
                            reason: BackwardIncompatibleDropReason::Edition2024,
                        },
                    ),
                );
            }
            DropKind::Storage => {
                // Ordinarily, storage-dead nodes are not emitted on unwind, so we don't
                // need to adjust `unwind_to` on this path. However, in some specific cases
                // we *do* emit storage-dead nodes on the unwind path, and in that case now that
                // the storage-dead has completed, we need to adjust the `unwind_to` pointer
                // so that any future drops we emit will not register storage-dead.
                if storage_dead_on_unwind {
                    debug_assert_eq!(
                        unwind_drops.drop_nodes[unwind_to].data.local,
                        drop_data.local
                    );
                    debug_assert_eq!(unwind_drops.drop_nodes[unwind_to].data.kind, drop_data.kind);
                    unwind_to = unwind_drops.drop_nodes[unwind_to].next;
                }
                if let Some(idx) = dropline_to {
                    debug_assert_eq!(coroutine_drops.drop_nodes[idx].data.local, drop_data.local);
                    debug_assert_eq!(coroutine_drops.drop_nodes[idx].data.kind, drop_data.kind);
                    dropline_to = Some(coroutine_drops.drop_nodes[idx].next);
                }
                // Only temps and vars need their storage dead.
                assert!(local.index() > arg_count);
                cfg.push(block, Statement::new(source_info, StatementKind::StorageDead(local)));
            }
        }
    }
    block.unit()
}

impl<'a, 'tcx: 'a> Builder<'a, 'tcx> {
    /// Build a drop tree for a breakable scope.
    ///
    /// If `continue_block` is `Some`, then the tree is for `continue` inside a
    /// loop. Otherwise this is for `break` or `return`.
    fn build_exit_tree(
        &mut self,
        mut drops: DropTree,
        else_scope: region::Scope,
        span: Span,
        continue_block: Option<BasicBlock>,
    ) -> Option<BlockAnd<()>> {
        let blocks = drops.build_mir::<ExitScopes>(&mut self.cfg, continue_block);
        let is_coroutine = self.coroutine.is_some();

        // Link the exit drop tree to unwind drop tree.
        if drops.drop_nodes.iter().any(|drop_node| drop_node.data.kind == DropKind::Value) {
            let unwind_target = self.diverge_cleanup_target(else_scope, span);
            let mut unwind_indices = IndexVec::from_elem_n(unwind_target, 1);
            for (drop_idx, drop_node) in drops.drop_nodes.iter_enumerated().skip(1) {
                match drop_node.data.kind {
                    DropKind::Storage | DropKind::ForLint => {
                        if is_coroutine {
                            let unwind_drop = self
                                .scopes
                                .unwind_drops
                                .add_drop(drop_node.data, unwind_indices[drop_node.next]);
                            unwind_indices.push(unwind_drop);
                        } else {
                            unwind_indices.push(unwind_indices[drop_node.next]);
                        }
                    }
                    DropKind::Value => {
                        let unwind_drop = self
                            .scopes
                            .unwind_drops
                            .add_drop(drop_node.data, unwind_indices[drop_node.next]);
                        self.scopes.unwind_drops.add_entry_point(
                            blocks[drop_idx].unwrap(),
                            unwind_indices[drop_node.next],
                        );
                        unwind_indices.push(unwind_drop);
                    }
                }
            }
        }
        // Link the exit drop tree to dropline drop tree (coroutine drop path) for async drops
        if is_coroutine
            && drops.drop_nodes.iter().any(|DropNode { data, next: _ }| {
                data.kind == DropKind::Value && self.is_async_drop(data.local)
            })
        {
            let dropline_target = self.diverge_dropline_target(else_scope, span);
            let mut dropline_indices = IndexVec::from_elem_n(dropline_target, 1);
            for (drop_idx, drop_data) in drops.drop_nodes.iter_enumerated().skip(1) {
                let coroutine_drop = self
                    .scopes
                    .coroutine_drops
                    .add_drop(drop_data.data, dropline_indices[drop_data.next]);
                match drop_data.data.kind {
                    DropKind::Storage | DropKind::ForLint => {}
                    DropKind::Value => {
                        if self.is_async_drop(drop_data.data.local) {
                            self.scopes.coroutine_drops.add_entry_point(
                                blocks[drop_idx].unwrap(),
                                dropline_indices[drop_data.next],
                            );
                        }
                    }
                }
                dropline_indices.push(coroutine_drop);
            }
        }
        blocks[ROOT_NODE].map(BasicBlock::unit)
    }

    /// Build the unwind and coroutine drop trees.
    pub(crate) fn build_drop_trees(&mut self) {
        if self.coroutine.is_some() {
            self.build_coroutine_drop_trees();
        } else {
            Self::build_unwind_tree(
                &mut self.cfg,
                &mut self.scopes.unwind_drops,
                self.fn_span,
                &mut None,
            );
        }
    }

    fn build_coroutine_drop_trees(&mut self) {
        // Build the drop tree for dropping the coroutine while it's suspended.
        let drops = &mut self.scopes.coroutine_drops;
        let cfg = &mut self.cfg;
        let fn_span = self.fn_span;
        let blocks = drops.build_mir::<CoroutineDrop>(cfg, None);
        if let Some(root_block) = blocks[ROOT_NODE] {
            cfg.terminate(
                root_block,
                SourceInfo::outermost(fn_span),
                TerminatorKind::CoroutineDrop,
            );
        }

        // Build the drop tree for unwinding in the normal control flow paths.
        let resume_block = &mut None;
        let unwind_drops = &mut self.scopes.unwind_drops;
        Self::build_unwind_tree(cfg, unwind_drops, fn_span, resume_block);

        // Build the drop tree for unwinding when dropping a suspended
        // coroutine.
        //
        // This is a different tree to the standard unwind paths here to
        // prevent drop elaboration from creating drop flags that would have
        // to be captured by the coroutine. I'm not sure how important this
        // optimization is, but it is here.
        for (drop_idx, drop_node) in drops.drop_nodes.iter_enumerated() {
            if let DropKind::Value = drop_node.data.kind
                && let Some(bb) = blocks[drop_idx]
            {
                debug_assert!(drop_node.next < drops.drop_nodes.next_index());
                drops.entry_points.push((drop_node.next, bb));
            }
        }
        Self::build_unwind_tree(cfg, drops, fn_span, resume_block);
    }

    fn build_unwind_tree(
        cfg: &mut CFG<'tcx>,
        drops: &mut DropTree,
        fn_span: Span,
        resume_block: &mut Option<BasicBlock>,
    ) {
        let blocks = drops.build_mir::<Unwind>(cfg, *resume_block);
        if let (None, Some(resume)) = (*resume_block, blocks[ROOT_NODE]) {
            cfg.terminate(resume, SourceInfo::outermost(fn_span), TerminatorKind::UnwindResume);

            *resume_block = blocks[ROOT_NODE];
        }
    }
}

// DropTreeBuilder implementations.

struct ExitScopes;

impl<'tcx> DropTreeBuilder<'tcx> for ExitScopes {
    fn make_block(cfg: &mut CFG<'tcx>) -> BasicBlock {
        cfg.start_new_block()
    }
    fn link_entry_point(cfg: &mut CFG<'tcx>, from: BasicBlock, to: BasicBlock) {
        // There should be an existing terminator with real source info and a
        // dummy TerminatorKind. Replace it with a proper goto.
        // (The dummy is added by `break_scope` and `break_for_else`.)
        let term = cfg.block_data_mut(from).terminator_mut();
        if let TerminatorKind::UnwindResume = term.kind {
            term.kind = TerminatorKind::Goto { target: to };
        } else {
            span_bug!(term.source_info.span, "unexpected dummy terminator kind: {:?}", term.kind);
        }
    }
}

struct CoroutineDrop;

impl<'tcx> DropTreeBuilder<'tcx> for CoroutineDrop {
    fn make_block(cfg: &mut CFG<'tcx>) -> BasicBlock {
        cfg.start_new_block()
    }
    fn link_entry_point(cfg: &mut CFG<'tcx>, from: BasicBlock, to: BasicBlock) {
        let term = cfg.block_data_mut(from).terminator_mut();
        if let TerminatorKind::Yield { ref mut drop, .. } = term.kind {
            *drop = Some(to);
        } else if let TerminatorKind::Drop { ref mut drop, .. } = term.kind {
            *drop = Some(to);
        } else {
            span_bug!(
                term.source_info.span,
                "cannot enter coroutine drop tree from {:?}",
                term.kind
            )
        }
    }
}

struct Unwind;

impl<'tcx> DropTreeBuilder<'tcx> for Unwind {
    fn make_block(cfg: &mut CFG<'tcx>) -> BasicBlock {
        cfg.start_new_cleanup_block()
    }
    fn link_entry_point(cfg: &mut CFG<'tcx>, from: BasicBlock, to: BasicBlock) {
        let term = &mut cfg.block_data_mut(from).terminator_mut();
        match &mut term.kind {
            TerminatorKind::Drop { unwind, .. } => {
                if let UnwindAction::Cleanup(unwind) = *unwind {
                    let source_info = term.source_info;
                    cfg.terminate(unwind, source_info, TerminatorKind::Goto { target: to });
                } else {
                    *unwind = UnwindAction::Cleanup(to);
                }
            }
            TerminatorKind::FalseUnwind { unwind, .. }
            | TerminatorKind::Call { unwind, .. }
            | TerminatorKind::Assert { unwind, .. }
            | TerminatorKind::InlineAsm { unwind, .. } => {
                *unwind = UnwindAction::Cleanup(to);
            }
            TerminatorKind::Goto { .. }
            | TerminatorKind::SwitchInt { .. }
            | TerminatorKind::UnwindResume
            | TerminatorKind::UnwindTerminate(_)
            | TerminatorKind::Return
            | TerminatorKind::TailCall { .. }
            | TerminatorKind::Unreachable
            | TerminatorKind::Yield { .. }
            | TerminatorKind::CoroutineDrop
            | TerminatorKind::FalseEdge { .. } => {
                span_bug!(term.source_info.span, "cannot unwind from {:?}", term.kind)
            }
        }
    }
}