; NOTE: Assertions have been autogenerated by utils/update_analyze_test_checks.py
; RUN: opt -passes='print<scalar-evolution>' -disable-output %s 2>&1 | FileCheck %s

; Test case for PR40961. The loop guard limit the max backedge-taken count.

define void @test_guard_less_than_16(i32* nocapture %a, i64 %i) {
; CHECK-LABEL: 'test_guard_less_than_16'
; CHECK-NEXT:  Classifying expressions for: @test_guard_less_than_16
; CHECK-NEXT:    %iv = phi i64 [ %iv.next, %loop ], [ %i, %entry ]
; CHECK-NEXT:    --> {%i,+,1}<nuw><nsw><%loop> U: full-set S: full-set Exits: 15 LoopDispositions: { %loop: Computable }
; CHECK-NEXT:    %idx = getelementptr inbounds i32, i32* %a, i64 %iv
; CHECK-NEXT:    --> {((4 * %i) + %a),+,4}<nw><%loop> U: full-set S: full-set Exits: (60 + %a) LoopDispositions: { %loop: Computable }
; CHECK-NEXT:    %iv.next = add nuw nsw i64 %iv, 1
; CHECK-NEXT:    --> {(1 + %i),+,1}<nuw><nsw><%loop> U: full-set S: full-set Exits: 16 LoopDispositions: { %loop: Computable }
; CHECK-NEXT:  Determining loop execution counts for: @test_guard_less_than_16
; CHECK-NEXT:  Loop %loop: backedge-taken count is (15 + (-1 * %i))
; CHECK-NEXT:  Loop %loop: max backedge-taken count is 15
; CHECK-NEXT:  Loop %loop: Predicated backedge-taken count is (15 + (-1 * %i))
; CHECK-NEXT:   Predicates:
; CHECK:       Loop %loop: Trip multiple is 1
;
entry:
  %cmp3 = icmp ult i64 %i, 16
  br i1 %cmp3, label %loop, label %exit

loop:
  %iv = phi i64 [ %iv.next, %loop ], [ %i, %entry ]
  %idx = getelementptr inbounds i32, i32* %a, i64 %iv
  store i32 1, i32* %idx, align 4
  %iv.next = add nuw nsw i64 %iv, 1
  %exitcond = icmp eq i64 %iv.next, 16
  br i1 %exitcond, label %exit, label %loop

exit:
  ret void
}

define void @test_guard_less_than_16_operands_swapped(i32* nocapture %a, i64 %i) {
; CHECK-LABEL: 'test_guard_less_than_16_operands_swapped'
; CHECK-NEXT:  Classifying expressions for: @test_guard_less_than_16_operands_swapped
; CHECK-NEXT:    %iv = phi i64 [ %iv.next, %loop ], [ %i, %entry ]
; CHECK-NEXT:    --> {%i,+,1}<nuw><nsw><%loop> U: full-set S: full-set Exits: 15 LoopDispositions: { %loop: Computable }
; CHECK-NEXT:    %idx = getelementptr inbounds i32, i32* %a, i64 %iv
; CHECK-NEXT:    --> {((4 * %i) + %a),+,4}<nw><%loop> U: full-set S: full-set Exits: (60 + %a) LoopDispositions: { %loop: Computable }
; CHECK-NEXT:    %iv.next = add nuw nsw i64 %iv, 1
; CHECK-NEXT:    --> {(1 + %i),+,1}<nuw><nsw><%loop> U: full-set S: full-set Exits: 16 LoopDispositions: { %loop: Computable }
; CHECK-NEXT:  Determining loop execution counts for: @test_guard_less_than_16_operands_swapped
; CHECK-NEXT:  Loop %loop: backedge-taken count is (15 + (-1 * %i))
; CHECK-NEXT:  Loop %loop: max backedge-taken count is 15
; CHECK-NEXT:  Loop %loop: Predicated backedge-taken count is (15 + (-1 * %i))
; CHECK-NEXT:   Predicates:
; CHECK:       Loop %loop: Trip multiple is 1
;
entry:
  %cmp3 = icmp ugt i64 16, %i
  br i1 %cmp3, label %loop, label %exit

loop:
  %iv = phi i64 [ %iv.next, %loop ], [ %i, %entry ]
  %idx = getelementptr inbounds i32, i32* %a, i64 %iv
  store i32 1, i32* %idx, align 4
  %iv.next = add nuw nsw i64 %iv, 1
  %exitcond = icmp eq i64 %iv.next, 16
  br i1 %exitcond, label %exit, label %loop

exit:
  ret void
}

define void @test_guard_less_than_16_branches_flipped(i32* nocapture %a, i64 %i) {
; CHECK-LABEL: 'test_guard_less_than_16_branches_flipped'
; CHECK-NEXT:  Classifying expressions for: @test_guard_less_than_16_branches_flipped
; CHECK-NEXT:    %iv = phi i64 [ %iv.next, %loop ], [ %i, %entry ]
; CHECK-NEXT:    --> {%i,+,1}<nuw><nsw><%loop> U: full-set S: full-set Exits: 15 LoopDispositions: { %loop: Computable }
; CHECK-NEXT:    %idx = getelementptr inbounds i32, i32* %a, i64 %iv
; CHECK-NEXT:    --> {((4 * %i) + %a),+,4}<nw><%loop> U: full-set S: full-set Exits: (60 + %a) LoopDispositions: { %loop: Computable }
; CHECK-NEXT:    %iv.next = add nuw nsw i64 %iv, 1
; CHECK-NEXT:    --> {(1 + %i),+,1}<nuw><nsw><%loop> U: full-set S: full-set Exits: 16 LoopDispositions: { %loop: Computable }
; CHECK-NEXT:  Determining loop execution counts for: @test_guard_less_than_16_branches_flipped
; CHECK-NEXT:  Loop %loop: backedge-taken count is (15 + (-1 * %i))
; CHECK-NEXT:  Loop %loop: max backedge-taken count is -1
; CHECK-NEXT:  Loop %loop: Predicated backedge-taken count is (15 + (-1 * %i))
; CHECK-NEXT:   Predicates:
; CHECK:       Loop %loop: Trip multiple is 1
;
entry:
  %cmp3 = icmp ult i64 %i, 16
  br i1 %cmp3, label %exit, label %loop

loop:
  %iv = phi i64 [ %iv.next, %loop ], [ %i, %entry ]
  %idx = getelementptr inbounds i32, i32* %a, i64 %iv
  store i32 1, i32* %idx, align 4
  %iv.next = add nuw nsw i64 %iv, 1
  %exitcond = icmp eq i64 %iv.next, 16
  br i1 %exitcond, label %exit, label %loop

exit:
  ret void
}

define void @test_guard_uge_16_branches_flipped(i32* nocapture %a, i64 %i) {
; CHECK-LABEL: 'test_guard_uge_16_branches_flipped'
; CHECK-NEXT:  Classifying expressions for: @test_guard_uge_16_branches_flipped
; CHECK-NEXT:    %iv = phi i64 [ %iv.next, %loop ], [ %i, %entry ]
; CHECK-NEXT:    --> {%i,+,1}<nuw><nsw><%loop> U: full-set S: full-set Exits: 15 LoopDispositions: { %loop: Computable }
; CHECK-NEXT:    %idx = getelementptr inbounds i32, i32* %a, i64 %iv
; CHECK-NEXT:    --> {((4 * %i) + %a),+,4}<nw><%loop> U: full-set S: full-set Exits: (60 + %a) LoopDispositions: { %loop: Computable }
; CHECK-NEXT:    %iv.next = add nuw nsw i64 %iv, 1
; CHECK-NEXT:    --> {(1 + %i),+,1}<nuw><nsw><%loop> U: full-set S: full-set Exits: 16 LoopDispositions: { %loop: Computable }
; CHECK-NEXT:  Determining loop execution counts for: @test_guard_uge_16_branches_flipped
; CHECK-NEXT:  Loop %loop: backedge-taken count is (15 + (-1 * %i))
; CHECK-NEXT:  Loop %loop: max backedge-taken count is 15
; CHECK-NEXT:  Loop %loop: Predicated backedge-taken count is (15 + (-1 * %i))
; CHECK-NEXT:   Predicates:
; CHECK:       Loop %loop: Trip multiple is 1
;
entry:
  %cmp3 = icmp uge i64 %i, 16
  br i1 %cmp3, label %exit, label %loop

loop:
  %iv = phi i64 [ %iv.next, %loop ], [ %i, %entry ]
  %idx = getelementptr inbounds i32, i32* %a, i64 %iv
  store i32 1, i32* %idx, align 4
  %iv.next = add nuw nsw i64 %iv, 1
  %exitcond = icmp eq i64 %iv.next, 16
  br i1 %exitcond, label %exit, label %loop

exit:
  ret void
}

define void @test_guard_eq_12(i32* nocapture %a, i64 %N) {
; CHECK-LABEL: 'test_guard_eq_12'
; CHECK-NEXT:  Classifying expressions for: @test_guard_eq_12
; CHECK-NEXT:    %iv = phi i64 [ %iv.next, %loop ], [ 0, %entry ]
; CHECK-NEXT:    --> {0,+,1}<nuw><nsw><%loop> U: [0,13) S: [0,13) Exits: %N LoopDispositions: { %loop: Computable }
; CHECK-NEXT:    %idx = getelementptr inbounds i32, i32* %a, i64 %iv
; CHECK-NEXT:    --> {%a,+,4}<nuw><%loop> U: full-set S: full-set Exits: ((4 * %N) + %a) LoopDispositions: { %loop: Computable }
; CHECK-NEXT:    %iv.next = add nuw nsw i64 %iv, 1
; CHECK-NEXT:    --> {1,+,1}<nuw><nsw><%loop> U: [1,14) S: [1,14) Exits: (1 + %N) LoopDispositions: { %loop: Computable }
; CHECK-NEXT:  Determining loop execution counts for: @test_guard_eq_12
; CHECK-NEXT:  Loop %loop: backedge-taken count is %N
; CHECK-NEXT:  Loop %loop: max backedge-taken count is 12
; CHECK-NEXT:  Loop %loop: Predicated backedge-taken count is %N
; CHECK-NEXT:   Predicates:
; CHECK:       Loop %loop: Trip multiple is 1
;
entry:
  %c.1 = icmp eq i64 %N, 12
  br i1 %c.1, label %loop, label %exit

loop:
  %iv = phi i64 [ %iv.next, %loop ], [ 0, %entry ]
  %idx = getelementptr inbounds i32, i32* %a, i64 %iv
  store i32 1, i32* %idx, align 4
  %iv.next = add nuw nsw i64 %iv, 1
  %exitcond = icmp eq i64 %iv, %N
  br i1 %exitcond, label %exit, label %loop

exit:
  ret void
}

define void @test_guard_ule_12(i32* nocapture %a, i64 %N) {
; CHECK-LABEL: 'test_guard_ule_12'
; CHECK-NEXT:  Classifying expressions for: @test_guard_ule_12
; CHECK-NEXT:    %iv = phi i64 [ %iv.next, %loop ], [ 0, %entry ]
; CHECK-NEXT:    --> {0,+,1}<nuw><nsw><%loop> U: [0,13) S: [0,13) Exits: %N LoopDispositions: { %loop: Computable }
; CHECK-NEXT:    %idx = getelementptr inbounds i32, i32* %a, i64 %iv
; CHECK-NEXT:    --> {%a,+,4}<nuw><%loop> U: full-set S: full-set Exits: ((4 * %N) + %a) LoopDispositions: { %loop: Computable }
; CHECK-NEXT:    %iv.next = add nuw nsw i64 %iv, 1
; CHECK-NEXT:    --> {1,+,1}<nuw><nsw><%loop> U: [1,14) S: [1,14) Exits: (1 + %N) LoopDispositions: { %loop: Computable }
; CHECK-NEXT:  Determining loop execution counts for: @test_guard_ule_12
; CHECK-NEXT:  Loop %loop: backedge-taken count is %N
; CHECK-NEXT:  Loop %loop: max backedge-taken count is 12
; CHECK-NEXT:  Loop %loop: Predicated backedge-taken count is %N
; CHECK-NEXT:   Predicates:
; CHECK:       Loop %loop: Trip multiple is 1
;
entry:
  %c.1 = icmp ule i64 %N, 12
  br i1 %c.1, label %loop, label %exit

loop:
  %iv = phi i64 [ %iv.next, %loop ], [ 0, %entry ]
  %idx = getelementptr inbounds i32, i32* %a, i64 %iv
  store i32 1, i32* %idx, align 4
  %iv.next = add nuw nsw i64 %iv, 1
  %exitcond = icmp eq i64 %iv, %N
  br i1 %exitcond, label %exit, label %loop

exit:
  ret void
}

define void @test_guard_ule_12_step2(i32* nocapture %a, i64 %N) {
; CHECK-LABEL: 'test_guard_ule_12_step2'
; CHECK-NEXT:  Classifying expressions for: @test_guard_ule_12_step2
; CHECK-NEXT:    %iv = phi i64 [ %iv.next, %loop ], [ 0, %entry ]
; CHECK-NEXT:    --> {0,+,2}<nuw><nsw><%loop> U: [0,13) S: [0,13) Exits: (2 * (%N /u 2))<nuw> LoopDispositions: { %loop: Computable }
; CHECK-NEXT:    %idx = getelementptr inbounds i32, i32* %a, i64 %iv
; CHECK-NEXT:    --> {%a,+,8}<nuw><%loop> U: full-set S: full-set Exits: ((8 * (%N /u 2)) + %a) LoopDispositions: { %loop: Computable }
; CHECK-NEXT:    %iv.next = add nuw nsw i64 %iv, 2
; CHECK-NEXT:    --> {2,+,2}<nuw><nsw><%loop> U: [2,15) S: [2,15) Exits: (2 + (2 * (%N /u 2))<nuw>) LoopDispositions: { %loop: Computable }
; CHECK-NEXT:  Determining loop execution counts for: @test_guard_ule_12_step2
; CHECK-NEXT:  Loop %loop: backedge-taken count is (%N /u 2)
; CHECK-NEXT:  Loop %loop: max backedge-taken count is 6
; CHECK-NEXT:  Loop %loop: Predicated backedge-taken count is (%N /u 2)
; CHECK-NEXT:   Predicates:
; CHECK:       Loop %loop: Trip multiple is 1
;
entry:
  %c.1 = icmp ule i64 %N, 12
  br i1 %c.1, label %loop, label %exit

loop:
  %iv = phi i64 [ %iv.next, %loop ], [ 0, %entry ]
  %idx = getelementptr inbounds i32, i32* %a, i64 %iv
  store i32 1, i32* %idx, align 4
  %iv.next = add nuw nsw i64 %iv, 2
  %exitcond = icmp eq i64 %iv, %N
  br i1 %exitcond, label %exit, label %loop

exit:
  ret void
}

define void @test_multiple_const_guards_order1(i32* nocapture %a, i64 %i) {
; CHECK-LABEL: 'test_multiple_const_guards_order1'
; CHECK-NEXT:  Classifying expressions for: @test_multiple_const_guards_order1
; CHECK-NEXT:    %iv = phi i64 [ %iv.next, %loop ], [ 0, %guardbb ]
; CHECK-NEXT:    --> {0,+,1}<nuw><nsw><%loop> U: [0,10) S: [0,10) Exits: %i LoopDispositions: { %loop: Computable }
; CHECK-NEXT:    %idx = getelementptr inbounds i32, i32* %a, i64 %iv
; CHECK-NEXT:    --> {%a,+,4}<nuw><%loop> U: full-set S: full-set Exits: ((4 * %i) + %a) LoopDispositions: { %loop: Computable }
; CHECK-NEXT:    %iv.next = add nuw nsw i64 %iv, 1
; CHECK-NEXT:    --> {1,+,1}<nuw><nsw><%loop> U: [1,11) S: [1,11) Exits: (1 + %i) LoopDispositions: { %loop: Computable }
; CHECK-NEXT:  Determining loop execution counts for: @test_multiple_const_guards_order1
; CHECK-NEXT:  Loop %loop: backedge-taken count is %i
; CHECK-NEXT:  Loop %loop: max backedge-taken count is 9
; CHECK-NEXT:  Loop %loop: Predicated backedge-taken count is %i
; CHECK-NEXT:   Predicates:
; CHECK:       Loop %loop: Trip multiple is 1
;
entry:
  %c.1 = icmp ult i64 %i, 16
  br i1 %c.1, label %guardbb, label %exit

guardbb:
  %c.2 = icmp ult i64 %i, 10
  br i1 %c.2, label %loop, label %exit

loop:
  %iv = phi i64 [ %iv.next, %loop ], [ 0, %guardbb ]
  %idx = getelementptr inbounds i32, i32* %a, i64 %iv
  store i32 1, i32* %idx, align 4
  %iv.next = add nuw nsw i64 %iv, 1
  %exitcond = icmp eq i64 %iv, %i
  br i1 %exitcond, label %exit, label %loop

exit:
  ret void
}

define void @test_multiple_const_guards_order2(i32* nocapture %a, i64 %i) {
; CHECK-LABEL: 'test_multiple_const_guards_order2'
; CHECK-NEXT:  Classifying expressions for: @test_multiple_const_guards_order2
; CHECK-NEXT:    %iv = phi i64 [ %iv.next, %loop ], [ 0, %guardbb ]
; CHECK-NEXT:    --> {0,+,1}<nuw><nsw><%loop> U: [0,10) S: [0,10) Exits: %i LoopDispositions: { %loop: Computable }
; CHECK-NEXT:    %idx = getelementptr inbounds i32, i32* %a, i64 %iv
; CHECK-NEXT:    --> {%a,+,4}<nuw><%loop> U: full-set S: full-set Exits: ((4 * %i) + %a) LoopDispositions: { %loop: Computable }
; CHECK-NEXT:    %iv.next = add nuw nsw i64 %iv, 1
; CHECK-NEXT:    --> {1,+,1}<nuw><nsw><%loop> U: [1,11) S: [1,11) Exits: (1 + %i) LoopDispositions: { %loop: Computable }
; CHECK-NEXT:  Determining loop execution counts for: @test_multiple_const_guards_order2
; CHECK-NEXT:  Loop %loop: backedge-taken count is %i
; CHECK-NEXT:  Loop %loop: max backedge-taken count is 9
; CHECK-NEXT:  Loop %loop: Predicated backedge-taken count is %i
; CHECK-NEXT:   Predicates:
; CHECK:       Loop %loop: Trip multiple is 1
;
entry:
  %c.1 = icmp ult i64 %i, 10
  br i1 %c.1, label %guardbb, label %exit

guardbb:
  %c.2 = icmp ult i64 %i, 16
  br i1 %c.2, label %loop, label %exit

loop:
  %iv = phi i64 [ %iv.next, %loop ], [ 0, %guardbb ]
  %idx = getelementptr inbounds i32, i32* %a, i64 %iv
  store i32 1, i32* %idx, align 4
  %iv.next = add nuw nsw i64 %iv, 1
  %exitcond = icmp eq i64 %iv, %i
  br i1 %exitcond, label %exit, label %loop

exit:
  ret void
}

; TODO: Currently we miss getting the tightest max backedge-taken count (11).
define void @test_multiple_var_guards_order1(i32* nocapture %a, i64 %i, i64 %N) {
; CHECK-LABEL: 'test_multiple_var_guards_order1'
; CHECK-NEXT:  Classifying expressions for: @test_multiple_var_guards_order1
; CHECK-NEXT:    %iv = phi i64 [ %iv.next, %loop ], [ 0, %guardbb ]
; CHECK-NEXT:    --> {0,+,1}<nuw><nsw><%loop> U: [0,-9223372036854775808) S: [0,-9223372036854775808) Exits: %i LoopDispositions: { %loop: Computable }
; CHECK-NEXT:    %idx = getelementptr inbounds i32, i32* %a, i64 %iv
; CHECK-NEXT:    --> {%a,+,4}<nuw><%loop> U: full-set S: full-set Exits: ((4 * %i) + %a) LoopDispositions: { %loop: Computable }
; CHECK-NEXT:    %iv.next = add nuw nsw i64 %iv, 1
; CHECK-NEXT:    --> {1,+,1}<nuw><%loop> U: [1,0) S: [1,0) Exits: (1 + %i) LoopDispositions: { %loop: Computable }
; CHECK-NEXT:  Determining loop execution counts for: @test_multiple_var_guards_order1
; CHECK-NEXT:  Loop %loop: backedge-taken count is %i
; CHECK-NEXT:  Loop %loop: max backedge-taken count is -1
; CHECK-NEXT:  Loop %loop: Predicated backedge-taken count is %i
; CHECK-NEXT:   Predicates:
; CHECK:       Loop %loop: Trip multiple is 1
;
entry:
  %c.1 = icmp ult i64 %N, 12
  br i1 %c.1, label %guardbb, label %exit

guardbb:
  %c.2 = icmp ult i64 %i, %N
  br i1 %c.2, label %loop, label %exit

loop:
  %iv = phi i64 [ %iv.next, %loop ], [ 0, %guardbb ]
  %idx = getelementptr inbounds i32, i32* %a, i64 %iv
  store i32 1, i32* %idx, align 4
  %iv.next = add nuw nsw i64 %iv, 1
  %exitcond = icmp eq i64 %iv, %i
  br i1 %exitcond, label %exit, label %loop

exit:
  ret void
}

; TODO: Currently we miss getting the tightest max backedge-taken count (11).
define void @test_multiple_var_guards_order2(i32* nocapture %a, i64 %i, i64 %N) {
; CHECK-LABEL: 'test_multiple_var_guards_order2'
; CHECK-NEXT:  Classifying expressions for: @test_multiple_var_guards_order2
; CHECK-NEXT:    %iv = phi i64 [ %iv.next, %loop ], [ 0, %guardbb ]
; CHECK-NEXT:    --> {0,+,1}<nuw><nsw><%loop> U: [0,-9223372036854775808) S: [0,-9223372036854775808) Exits: %i LoopDispositions: { %loop: Computable }
; CHECK-NEXT:    %idx = getelementptr inbounds i32, i32* %a, i64 %iv
; CHECK-NEXT:    --> {%a,+,4}<nuw><%loop> U: full-set S: full-set Exits: ((4 * %i) + %a) LoopDispositions: { %loop: Computable }
; CHECK-NEXT:    %iv.next = add nuw nsw i64 %iv, 1
; CHECK-NEXT:    --> {1,+,1}<nuw><%loop> U: [1,0) S: [1,0) Exits: (1 + %i) LoopDispositions: { %loop: Computable }
; CHECK-NEXT:  Determining loop execution counts for: @test_multiple_var_guards_order2
; CHECK-NEXT:  Loop %loop: backedge-taken count is %i
; CHECK-NEXT:  Loop %loop: max backedge-taken count is -1
; CHECK-NEXT:  Loop %loop: Predicated backedge-taken count is %i
; CHECK-NEXT:   Predicates:
; CHECK:       Loop %loop: Trip multiple is 1
;
entry:
  %c.1 = icmp ult i64 %i, %N
  br i1 %c.1, label %guardbb, label %exit

guardbb:
  %c.2 = icmp ult i64 %N, 12
  br i1 %c.2, label %loop, label %exit

loop:
  %iv = phi i64 [ %iv.next, %loop ], [ 0, %guardbb ]
  %idx = getelementptr inbounds i32, i32* %a, i64 %iv
  store i32 1, i32* %idx, align 4
  %iv.next = add nuw nsw i64 %iv, 1
  %exitcond = icmp eq i64 %iv, %i
  br i1 %exitcond, label %exit, label %loop

exit:
  ret void
}

; The guards here reference each other in a cycle.
define void @test_multiple_var_guards_cycle(i32* nocapture %a, i64 %i, i64 %N) {
; CHECK-LABEL: 'test_multiple_var_guards_cycle'
; CHECK-NEXT:  Classifying expressions for: @test_multiple_var_guards_cycle
; CHECK-NEXT:    %iv = phi i64 [ %iv.next, %loop ], [ 0, %guardbb ]
; CHECK-NEXT:    --> {0,+,1}<nuw><nsw><%loop> U: [0,-9223372036854775808) S: [0,-9223372036854775808) Exits: %N LoopDispositions: { %loop: Computable }
; CHECK-NEXT:    %idx = getelementptr inbounds i32, i32* %a, i64 %iv
; CHECK-NEXT:    --> {%a,+,4}<nuw><%loop> U: full-set S: full-set Exits: ((4 * %N) + %a) LoopDispositions: { %loop: Computable }
; CHECK-NEXT:    %iv.next = add nuw nsw i64 %iv, 1
; CHECK-NEXT:    --> {1,+,1}<nuw><%loop> U: [1,0) S: [1,0) Exits: (1 + %N) LoopDispositions: { %loop: Computable }
; CHECK-NEXT:  Determining loop execution counts for: @test_multiple_var_guards_cycle
; CHECK-NEXT:  Loop %loop: backedge-taken count is %N
; CHECK-NEXT:  Loop %loop: max backedge-taken count is -1
; CHECK-NEXT:  Loop %loop: Predicated backedge-taken count is %N
; CHECK-NEXT:   Predicates:
; CHECK:       Loop %loop: Trip multiple is 1
;
entry:
  %c.1 = icmp ult i64 %N, %i
  br i1 %c.1, label %guardbb, label %exit

guardbb:
  %c.2 = icmp ult i64 %i, %N
  br i1 %c.2, label %loop, label %exit

loop:
  %iv = phi i64 [ %iv.next, %loop ], [ 0, %guardbb ]
  %idx = getelementptr inbounds i32, i32* %a, i64 %iv
  store i32 1, i32* %idx, align 4
  %iv.next = add nuw nsw i64 %iv, 1
  %exitcond = icmp eq i64 %iv, %N
  br i1 %exitcond, label %exit, label %loop

exit:
  ret void
}

define void @test_guard_ult_ne(i32* nocapture readonly %data, i64 %count) {
; CHECK-LABEL: 'test_guard_ult_ne'
; CHECK-NEXT:  Classifying expressions for: @test_guard_ult_ne
; CHECK-NEXT:    %iv = phi i64 [ %iv.next, %loop ], [ 0, %guardbb ]
; CHECK-NEXT:    --> {0,+,1}<nuw><%loop> U: [0,4) S: [0,4) Exits: (-1 + %count) LoopDispositions: { %loop: Computable }
; CHECK-NEXT:    %idx = getelementptr inbounds i32, i32* %data, i64 %iv
; CHECK-NEXT:    --> {%data,+,4}<nuw><%loop> U: full-set S: full-set Exits: (-4 + (4 * %count) + %data) LoopDispositions: { %loop: Computable }
; CHECK-NEXT:    %iv.next = add nuw i64 %iv, 1
; CHECK-NEXT:    --> {1,+,1}<nuw><%loop> U: [1,5) S: [1,5) Exits: %count LoopDispositions: { %loop: Computable }
; CHECK-NEXT:  Determining loop execution counts for: @test_guard_ult_ne
; CHECK-NEXT:  Loop %loop: backedge-taken count is (-1 + %count)
; CHECK-NEXT:  Loop %loop: max backedge-taken count is 3
; CHECK-NEXT:  Loop %loop: Predicated backedge-taken count is (-1 + %count)
; CHECK-NEXT:   Predicates:
; CHECK:       Loop %loop: Trip multiple is 1
;
entry:
  %cmp.ult = icmp ult i64 %count, 5
  br i1 %cmp.ult, label %guardbb, label %exit

guardbb:
  %cmp.ne = icmp ne i64 %count, 0
  br i1 %cmp.ne, label %loop, label %exit

loop:
  %iv = phi i64 [ %iv.next, %loop ], [ 0, %guardbb ]
  %idx = getelementptr inbounds i32, i32* %data, i64 %iv
  store i32 1, i32* %idx, align 4
  %iv.next = add nuw i64 %iv, 1
  %exitcond.not = icmp eq i64 %iv.next, %count
  br i1 %exitcond.not, label %exit, label %loop

exit:
  ret void
}

define void @test_guard_ne_ult(i32* nocapture readonly %data, i64 %count) {
; CHECK-LABEL: 'test_guard_ne_ult'
; CHECK-NEXT:  Classifying expressions for: @test_guard_ne_ult
; CHECK-NEXT:    %iv = phi i64 [ %iv.next, %loop ], [ 0, %guardbb ]
; CHECK-NEXT:    --> {0,+,1}<nuw><%loop> U: [0,4) S: [0,4) Exits: (-1 + %count) LoopDispositions: { %loop: Computable }
; CHECK-NEXT:    %idx = getelementptr inbounds i32, i32* %data, i64 %iv
; CHECK-NEXT:    --> {%data,+,4}<nuw><%loop> U: full-set S: full-set Exits: (-4 + (4 * %count) + %data) LoopDispositions: { %loop: Computable }
; CHECK-NEXT:    %iv.next = add nuw i64 %iv, 1
; CHECK-NEXT:    --> {1,+,1}<nuw><%loop> U: [1,5) S: [1,5) Exits: %count LoopDispositions: { %loop: Computable }
; CHECK-NEXT:  Determining loop execution counts for: @test_guard_ne_ult
; CHECK-NEXT:  Loop %loop: backedge-taken count is (-1 + %count)
; CHECK-NEXT:  Loop %loop: max backedge-taken count is 3
; CHECK-NEXT:  Loop %loop: Predicated backedge-taken count is (-1 + %count)
; CHECK-NEXT:   Predicates:
; CHECK:       Loop %loop: Trip multiple is 1
;
entry:
  %cmp.ne = icmp ne i64 %count, 0
  br i1 %cmp.ne, label %guardbb, label %exit

guardbb:
  %cmp.ult = icmp ult i64 %count, 5
  br i1 %cmp.ult, label %loop, label %exit

loop:
  %iv = phi i64 [ %iv.next, %loop ], [ 0, %guardbb ]
  %idx = getelementptr inbounds i32, i32* %data, i64 %iv
  store i32 1, i32* %idx, align 4
  %iv.next = add nuw i64 %iv, 1
  %exitcond.not = icmp eq i64 %iv.next, %count
  br i1 %exitcond.not, label %exit, label %loop

exit:
  ret void
}

define void @test_guard_if_and_enter(i32* nocapture readonly %data, i64 %count) {
; CHECK-LABEL: 'test_guard_if_and_enter'
; CHECK-NEXT:  Classifying expressions for: @test_guard_if_and_enter
; CHECK-NEXT:    %cmp.and = and i1 %cmp.ult, %cmp.ne
; CHECK-NEXT:    --> %cmp.and U: full-set S: full-set
; CHECK-NEXT:    %iv = phi i64 [ %iv.next, %loop ], [ 0, %entry ]
; CHECK-NEXT:    --> {0,+,1}<nuw><%loop> U: [0,4) S: [0,4) Exits: (-1 + %count) LoopDispositions: { %loop: Computable }
; CHECK-NEXT:    %idx = getelementptr inbounds i32, i32* %data, i64 %iv
; CHECK-NEXT:    --> {%data,+,4}<nuw><%loop> U: full-set S: full-set Exits: (-4 + (4 * %count) + %data) LoopDispositions: { %loop: Computable }
; CHECK-NEXT:    %iv.next = add nuw i64 %iv, 1
; CHECK-NEXT:    --> {1,+,1}<nuw><%loop> U: [1,5) S: [1,5) Exits: %count LoopDispositions: { %loop: Computable }
; CHECK-NEXT:  Determining loop execution counts for: @test_guard_if_and_enter
; CHECK-NEXT:  Loop %loop: backedge-taken count is (-1 + %count)
; CHECK-NEXT:  Loop %loop: max backedge-taken count is 3
; CHECK-NEXT:  Loop %loop: Predicated backedge-taken count is (-1 + %count)
; CHECK-NEXT:   Predicates:
; CHECK:       Loop %loop: Trip multiple is 1
;
entry:
  %cmp.ult = icmp ult i64 %count, 5
  %cmp.ne = icmp ne i64 %count, 0
  %cmp.and = and i1 %cmp.ult, %cmp.ne
  br i1 %cmp.and, label %loop, label %exit

loop:
  %iv = phi i64 [ %iv.next, %loop ], [ 0, %entry ]
  %idx = getelementptr inbounds i32, i32* %data, i64 %iv
  store i32 1, i32* %idx, align 4
  %iv.next = add nuw i64 %iv, 1
  %exitcond.not = icmp eq i64 %iv.next, %count
  br i1 %exitcond.not, label %exit, label %loop

exit:
  ret void
}

define void @test_guard_if_and_skip(i32* nocapture readonly %data, i64 %count) {
; CHECK-LABEL: 'test_guard_if_and_skip'
; CHECK-NEXT:  Classifying expressions for: @test_guard_if_and_skip
; CHECK-NEXT:    %cmp.and = and i1 %cmp.ult, %cmp.ne
; CHECK-NEXT:    --> %cmp.and U: full-set S: full-set
; CHECK-NEXT:    %iv = phi i64 [ %iv.next, %loop ], [ 0, %entry ]
; CHECK-NEXT:    --> {0,+,1}<nuw><%loop> U: full-set S: full-set Exits: (-1 + %count) LoopDispositions: { %loop: Computable }
; CHECK-NEXT:    %idx = getelementptr inbounds i32, i32* %data, i64 %iv
; CHECK-NEXT:    --> {%data,+,4}<%loop> U: full-set S: full-set Exits: (-4 + (4 * %count) + %data) LoopDispositions: { %loop: Computable }
; CHECK-NEXT:    %iv.next = add nuw i64 %iv, 1
; CHECK-NEXT:    --> {1,+,1}<nuw><%loop> U: [1,0) S: [1,0) Exits: %count LoopDispositions: { %loop: Computable }
; CHECK-NEXT:  Determining loop execution counts for: @test_guard_if_and_skip
; CHECK-NEXT:  Loop %loop: backedge-taken count is (-1 + %count)
; CHECK-NEXT:  Loop %loop: max backedge-taken count is -1
; CHECK-NEXT:  Loop %loop: Predicated backedge-taken count is (-1 + %count)
; CHECK-NEXT:   Predicates:
; CHECK:       Loop %loop: Trip multiple is 1
;
entry:
  %cmp.ult = icmp ult i64 %count, 5
  %cmp.ne = icmp ne i64 %count, 0
  %cmp.and = and i1 %cmp.ult, %cmp.ne
  br i1 %cmp.and, label %exit, label %loop

loop:
  %iv = phi i64 [ %iv.next, %loop ], [ 0, %entry ]
  %idx = getelementptr inbounds i32, i32* %data, i64 %iv
  store i32 1, i32* %idx, align 4
  %iv.next = add nuw i64 %iv, 1
  %exitcond.not = icmp eq i64 %iv.next, %count
  br i1 %exitcond.not, label %exit, label %loop

exit:
  ret void
}

define void @test_guard_if_and_and(i32* nocapture readonly %data, i64 %count, i1 %c) {
; CHECK-LABEL: 'test_guard_if_and_and'
; CHECK-NEXT:  Classifying expressions for: @test_guard_if_and_and
; CHECK-NEXT:    %cmp.and1 = and i1 %c, %cmp.ne
; CHECK-NEXT:    --> %cmp.and1 U: full-set S: full-set
; CHECK-NEXT:    %cmp.and = and i1 %cmp.ult, %cmp.and1
; CHECK-NEXT:    --> %cmp.and U: full-set S: full-set
; CHECK-NEXT:    %iv = phi i64 [ %iv.next, %loop ], [ 0, %entry ]
; CHECK-NEXT:    --> {0,+,1}<nuw><%loop> U: [0,4) S: [0,4) Exits: (-1 + %count) LoopDispositions: { %loop: Computable }
; CHECK-NEXT:    %idx = getelementptr inbounds i32, i32* %data, i64 %iv
; CHECK-NEXT:    --> {%data,+,4}<nuw><%loop> U: full-set S: full-set Exits: (-4 + (4 * %count) + %data) LoopDispositions: { %loop: Computable }
; CHECK-NEXT:    %iv.next = add nuw i64 %iv, 1
; CHECK-NEXT:    --> {1,+,1}<nuw><%loop> U: [1,5) S: [1,5) Exits: %count LoopDispositions: { %loop: Computable }
; CHECK-NEXT:  Determining loop execution counts for: @test_guard_if_and_and
; CHECK-NEXT:  Loop %loop: backedge-taken count is (-1 + %count)
; CHECK-NEXT:  Loop %loop: max backedge-taken count is 3
; CHECK-NEXT:  Loop %loop: Predicated backedge-taken count is (-1 + %count)
; CHECK-NEXT:   Predicates:
; CHECK:       Loop %loop: Trip multiple is 1
;
entry:
  %cmp.ult = icmp ult i64 %count, 5
  %cmp.ne = icmp ne i64 %count, 0
  %cmp.and1 = and i1 %c, %cmp.ne
  %cmp.and = and i1 %cmp.ult, %cmp.and1
  br i1 %cmp.and, label %loop, label %exit

loop:
  %iv = phi i64 [ %iv.next, %loop ], [ 0, %entry ]
  %idx = getelementptr inbounds i32, i32* %data, i64 %iv
  store i32 1, i32* %idx, align 4
  %iv.next = add nuw i64 %iv, 1
  %exitcond.not = icmp eq i64 %iv.next, %count
  br i1 %exitcond.not, label %exit, label %loop

exit:
  ret void
}

define void @test_guard_if_and_or(i32* nocapture readonly %data, i64 %count, i1 %c) {
; CHECK-LABEL: 'test_guard_if_and_or'
; CHECK-NEXT:  Classifying expressions for: @test_guard_if_and_or
; CHECK-NEXT:    %cmp.or = or i1 %c, %cmp.ne
; CHECK-NEXT:    --> %cmp.or U: full-set S: full-set
; CHECK-NEXT:    %cmp.and = and i1 %cmp.ult, %cmp.or
; CHECK-NEXT:    --> %cmp.and U: full-set S: full-set
; CHECK-NEXT:    %iv = phi i64 [ %iv.next, %loop ], [ 0, %entry ]
; CHECK-NEXT:    --> {0,+,1}<nuw><%loop> U: full-set S: full-set Exits: (-1 + %count) LoopDispositions: { %loop: Computable }
; CHECK-NEXT:    %idx = getelementptr inbounds i32, i32* %data, i64 %iv
; CHECK-NEXT:    --> {%data,+,4}<%loop> U: full-set S: full-set Exits: (-4 + (4 * %count) + %data) LoopDispositions: { %loop: Computable }
; CHECK-NEXT:    %iv.next = add nuw i64 %iv, 1
; CHECK-NEXT:    --> {1,+,1}<nuw><%loop> U: [1,0) S: [1,0) Exits: %count LoopDispositions: { %loop: Computable }
; CHECK-NEXT:  Determining loop execution counts for: @test_guard_if_and_or
; CHECK-NEXT:  Loop %loop: backedge-taken count is (-1 + %count)
; CHECK-NEXT:  Loop %loop: max backedge-taken count is -1
; CHECK-NEXT:  Loop %loop: Predicated backedge-taken count is (-1 + %count)
; CHECK-NEXT:   Predicates:
; CHECK:       Loop %loop: Trip multiple is 1
;
entry:
  %cmp.ult = icmp ult i64 %count, 5
  %cmp.ne = icmp ne i64 %count, 0
  %cmp.or = or i1 %c, %cmp.ne
  %cmp.and = and i1 %cmp.ult, %cmp.or
  br i1 %cmp.and, label %loop, label %exit

loop:
  %iv = phi i64 [ %iv.next, %loop ], [ 0, %entry ]
  %idx = getelementptr inbounds i32, i32* %data, i64 %iv
  store i32 1, i32* %idx, align 4
  %iv.next = add nuw i64 %iv, 1
  %exitcond.not = icmp eq i64 %iv.next, %count
  br i1 %exitcond.not, label %exit, label %loop

exit:
  ret void
}

define void @test_guard_if_or_skip(i32* nocapture readonly %data, i64 %count) {
; CHECK-LABEL: 'test_guard_if_or_skip'
; CHECK-NEXT:  Classifying expressions for: @test_guard_if_or_skip
; CHECK-NEXT:    %cmp.or = or i1 %cmp.uge, %cmp.eq
; CHECK-NEXT:    --> %cmp.or U: full-set S: full-set
; CHECK-NEXT:    %iv = phi i64 [ %iv.next, %loop ], [ 0, %entry ]
; CHECK-NEXT:    --> {0,+,1}<nuw><%loop> U: [0,4) S: [0,4) Exits: (-1 + %count) LoopDispositions: { %loop: Computable }
; CHECK-NEXT:    %idx = getelementptr inbounds i32, i32* %data, i64 %iv
; CHECK-NEXT:    --> {%data,+,4}<nuw><%loop> U: full-set S: full-set Exits: (-4 + (4 * %count) + %data) LoopDispositions: { %loop: Computable }
; CHECK-NEXT:    %iv.next = add nuw i64 %iv, 1
; CHECK-NEXT:    --> {1,+,1}<nuw><%loop> U: [1,5) S: [1,5) Exits: %count LoopDispositions: { %loop: Computable }
; CHECK-NEXT:  Determining loop execution counts for: @test_guard_if_or_skip
; CHECK-NEXT:  Loop %loop: backedge-taken count is (-1 + %count)
; CHECK-NEXT:  Loop %loop: max backedge-taken count is 3
; CHECK-NEXT:  Loop %loop: Predicated backedge-taken count is (-1 + %count)
; CHECK-NEXT:   Predicates:
; CHECK:       Loop %loop: Trip multiple is 1
;
entry:
  %cmp.uge = icmp uge i64 %count, 5
  %cmp.eq = icmp eq i64 %count, 0
  %cmp.or = or i1 %cmp.uge, %cmp.eq
  br i1 %cmp.or, label %exit, label %loop

loop:
  %iv = phi i64 [ %iv.next, %loop ], [ 0, %entry ]
  %idx = getelementptr inbounds i32, i32* %data, i64 %iv
  store i32 1, i32* %idx, align 4
  %iv.next = add nuw i64 %iv, 1
  %exitcond.not = icmp eq i64 %iv.next, %count
  br i1 %exitcond.not, label %exit, label %loop

exit:
  ret void
}

define void @test_guard_if_or_enter(i32* nocapture readonly %data, i64 %count) {
; CHECK-LABEL: 'test_guard_if_or_enter'
; CHECK-NEXT:  Classifying expressions for: @test_guard_if_or_enter
; CHECK-NEXT:    %cmp.or = or i1 %cmp.uge, %cmp.eq
; CHECK-NEXT:    --> %cmp.or U: full-set S: full-set
; CHECK-NEXT:    %iv = phi i64 [ %iv.next, %loop ], [ 0, %entry ]
; CHECK-NEXT:    --> {0,+,1}<nuw><%loop> U: full-set S: full-set Exits: (-1 + %count) LoopDispositions: { %loop: Computable }
; CHECK-NEXT:    %idx = getelementptr inbounds i32, i32* %data, i64 %iv
; CHECK-NEXT:    --> {%data,+,4}<%loop> U: full-set S: full-set Exits: (-4 + (4 * %count) + %data) LoopDispositions: { %loop: Computable }
; CHECK-NEXT:    %iv.next = add nuw i64 %iv, 1
; CHECK-NEXT:    --> {1,+,1}<nuw><%loop> U: [1,0) S: [1,0) Exits: %count LoopDispositions: { %loop: Computable }
; CHECK-NEXT:  Determining loop execution counts for: @test_guard_if_or_enter
; CHECK-NEXT:  Loop %loop: backedge-taken count is (-1 + %count)
; CHECK-NEXT:  Loop %loop: max backedge-taken count is -1
; CHECK-NEXT:  Loop %loop: Predicated backedge-taken count is (-1 + %count)
; CHECK-NEXT:   Predicates:
; CHECK:       Loop %loop: Trip multiple is 1
;
entry:
  %cmp.uge = icmp uge i64 %count, 5
  %cmp.eq = icmp eq i64 %count, 0
  %cmp.or = or i1 %cmp.uge, %cmp.eq
  br i1 %cmp.or, label %loop, label %exit

loop:
  %iv = phi i64 [ %iv.next, %loop ], [ 0, %entry ]
  %idx = getelementptr inbounds i32, i32* %data, i64 %iv
  store i32 1, i32* %idx, align 4
  %iv.next = add nuw i64 %iv, 1
  %exitcond.not = icmp eq i64 %iv.next, %count
  br i1 %exitcond.not, label %exit, label %loop

exit:
  ret void
}

define void @test_guard_if_or_or(i32* nocapture readonly %data, i64 %count, i1 %c) {
; CHECK-LABEL: 'test_guard_if_or_or'
; CHECK-NEXT:  Classifying expressions for: @test_guard_if_or_or
; CHECK-NEXT:    %cmp.or1 = or i1 %c, %cmp.eq
; CHECK-NEXT:    --> %cmp.or1 U: full-set S: full-set
; CHECK-NEXT:    %cmp.or = or i1 %cmp.uge, %cmp.or1
; CHECK-NEXT:    --> %cmp.or U: full-set S: full-set
; CHECK-NEXT:    %iv = phi i64 [ %iv.next, %loop ], [ 0, %entry ]
; CHECK-NEXT:    --> {0,+,1}<nuw><%loop> U: [0,4) S: [0,4) Exits: (-1 + %count) LoopDispositions: { %loop: Computable }
; CHECK-NEXT:    %idx = getelementptr inbounds i32, i32* %data, i64 %iv
; CHECK-NEXT:    --> {%data,+,4}<nuw><%loop> U: full-set S: full-set Exits: (-4 + (4 * %count) + %data) LoopDispositions: { %loop: Computable }
; CHECK-NEXT:    %iv.next = add nuw i64 %iv, 1
; CHECK-NEXT:    --> {1,+,1}<nuw><%loop> U: [1,5) S: [1,5) Exits: %count LoopDispositions: { %loop: Computable }
; CHECK-NEXT:  Determining loop execution counts for: @test_guard_if_or_or
; CHECK-NEXT:  Loop %loop: backedge-taken count is (-1 + %count)
; CHECK-NEXT:  Loop %loop: max backedge-taken count is 3
; CHECK-NEXT:  Loop %loop: Predicated backedge-taken count is (-1 + %count)
; CHECK-NEXT:   Predicates:
; CHECK:       Loop %loop: Trip multiple is 1
;
entry:
  %cmp.uge = icmp uge i64 %count, 5
  %cmp.eq = icmp eq i64 %count, 0
  %cmp.or1 = or i1 %c, %cmp.eq
  %cmp.or = or i1 %cmp.uge, %cmp.or1
  br i1 %cmp.or, label %exit, label %loop

loop:
  %iv = phi i64 [ %iv.next, %loop ], [ 0, %entry ]
  %idx = getelementptr inbounds i32, i32* %data, i64 %iv
  store i32 1, i32* %idx, align 4
  %iv.next = add nuw i64 %iv, 1
  %exitcond.not = icmp eq i64 %iv.next, %count
  br i1 %exitcond.not, label %exit, label %loop

exit:
  ret void
}

define void @test_guard_if_or_and(i32* nocapture readonly %data, i64 %count, i1 %c) {
; CHECK-LABEL: 'test_guard_if_or_and'
; CHECK-NEXT:  Classifying expressions for: @test_guard_if_or_and
; CHECK-NEXT:    %cmp.and = and i1 %c, %cmp.eq
; CHECK-NEXT:    --> %cmp.and U: full-set S: full-set
; CHECK-NEXT:    %cmp.or = or i1 %cmp.uge, %cmp.and
; CHECK-NEXT:    --> %cmp.or U: full-set S: full-set
; CHECK-NEXT:    %iv = phi i64 [ %iv.next, %loop ], [ 0, %entry ]
; CHECK-NEXT:    --> {0,+,1}<nuw><%loop> U: full-set S: full-set Exits: (-1 + %count) LoopDispositions: { %loop: Computable }
; CHECK-NEXT:    %idx = getelementptr inbounds i32, i32* %data, i64 %iv
; CHECK-NEXT:    --> {%data,+,4}<%loop> U: full-set S: full-set Exits: (-4 + (4 * %count) + %data) LoopDispositions: { %loop: Computable }
; CHECK-NEXT:    %iv.next = add nuw i64 %iv, 1
; CHECK-NEXT:    --> {1,+,1}<nuw><%loop> U: [1,0) S: [1,0) Exits: %count LoopDispositions: { %loop: Computable }
; CHECK-NEXT:  Determining loop execution counts for: @test_guard_if_or_and
; CHECK-NEXT:  Loop %loop: backedge-taken count is (-1 + %count)
; CHECK-NEXT:  Loop %loop: max backedge-taken count is -1
; CHECK-NEXT:  Loop %loop: Predicated backedge-taken count is (-1 + %count)
; CHECK-NEXT:   Predicates:
; CHECK:       Loop %loop: Trip multiple is 1
;
entry:
  %cmp.uge = icmp uge i64 %count, 5
  %cmp.eq = icmp eq i64 %count, 0
  %cmp.and = and i1 %c, %cmp.eq
  %cmp.or = or i1 %cmp.uge, %cmp.and
  br i1 %cmp.or, label %exit, label %loop

loop:
  %iv = phi i64 [ %iv.next, %loop ], [ 0, %entry ]
  %idx = getelementptr inbounds i32, i32* %data, i64 %iv
  store i32 1, i32* %idx, align 4
  %iv.next = add nuw i64 %iv, 1
  %exitcond.not = icmp eq i64 %iv.next, %count
  br i1 %exitcond.not, label %exit, label %loop

exit:
  ret void
}

; Test case for PR47247. Both the guard condition and the assume limit the
; max backedge-taken count.

define void @test_guard_and_assume(i32* nocapture readonly %data, i64 %count) {
; CHECK-LABEL: 'test_guard_and_assume'
; CHECK-NEXT:  Classifying expressions for: @test_guard_and_assume
; CHECK-NEXT:    %iv = phi i64 [ %iv.next, %loop ], [ 0, %entry ]
; CHECK-NEXT:    --> {0,+,1}<nuw><%loop> U: [0,4) S: [0,4) Exits: (-1 + %count) LoopDispositions: { %loop: Computable }
; CHECK-NEXT:    %idx = getelementptr inbounds i32, i32* %data, i64 %iv
; CHECK-NEXT:    --> {%data,+,4}<nuw><%loop> U: full-set S: full-set Exits: (-4 + (4 * %count) + %data) LoopDispositions: { %loop: Computable }
; CHECK-NEXT:    %iv.next = add nuw i64 %iv, 1
; CHECK-NEXT:    --> {1,+,1}<nuw><%loop> U: [1,5) S: [1,5) Exits: %count LoopDispositions: { %loop: Computable }
; CHECK-NEXT:  Determining loop execution counts for: @test_guard_and_assume
; CHECK-NEXT:  Loop %loop: backedge-taken count is (-1 + %count)
; CHECK-NEXT:  Loop %loop: max backedge-taken count is 3
; CHECK-NEXT:  Loop %loop: Predicated backedge-taken count is (-1 + %count)
; CHECK-NEXT:   Predicates:
; CHECK:       Loop %loop: Trip multiple is 1
;
entry:
  %cmp = icmp ult i64 %count, 5
  tail call void @llvm.assume(i1 %cmp)
  %cmp18.not = icmp eq i64 %count, 0
  br i1 %cmp18.not, label %exit, label %loop

loop:
  %iv = phi i64 [ %iv.next, %loop ], [ 0, %entry ]
  %idx = getelementptr inbounds i32, i32* %data, i64 %iv
  store i32 1, i32* %idx, align 4
  %iv.next = add nuw i64 %iv, 1
  %exitcond.not = icmp eq i64 %iv.next, %count
  br i1 %exitcond.not, label %exit, label %loop

exit:
  ret void
}

; Function Attrs: nounwind willreturn
declare void @llvm.assume(i1 noundef)

define void @guard_pessimizes_analysis_step1(i1 %c, i32 %N) {
; CHECK-LABEL: 'guard_pessimizes_analysis_step1'
; CHECK-NEXT:  Classifying expressions for: @guard_pessimizes_analysis_step1
; CHECK-NEXT:    %init = phi i32 [ 2, %entry ], [ 3, %bb1 ]
; CHECK-NEXT:    --> %init U: [2,4) S: [2,4)
; CHECK-NEXT:    %iv = phi i32 [ %iv.next, %loop ], [ %init, %loop.ph ]
; CHECK-NEXT:    --> {%init,+,1}<%loop> U: [2,11) S: [2,11) Exits: 9 LoopDispositions: { %loop: Computable }
; CHECK-NEXT:    %iv.next = add i32 %iv, 1
; CHECK-NEXT:    --> {(1 + %init)<nuw><nsw>,+,1}<%loop> U: [3,12) S: [3,12) Exits: 10 LoopDispositions: { %loop: Computable }
; CHECK-NEXT:  Determining loop execution counts for: @guard_pessimizes_analysis_step1
; CHECK-NEXT:  Loop %loop: backedge-taken count is (9 + (-1 * %init)<nsw>)<nsw>
; CHECK-NEXT:  Loop %loop: max backedge-taken count is 7
; CHECK-NEXT:  Loop %loop: Predicated backedge-taken count is (9 + (-1 * %init)<nsw>)<nsw>
; CHECK-NEXT:   Predicates:
; CHECK:       Loop %loop: Trip multiple is 1
;
entry:
  br i1 %c, label %bb1, label %guard

bb1:
  br label %guard

guard:
  %init = phi i32 [ 2, %entry ], [ 3, %bb1 ]
  %c.1 = icmp ult i32 %init, %N
  br i1 %c.1, label %loop.ph, label %exit

loop.ph:
  br label %loop

loop:
  %iv = phi i32 [ %iv.next, %loop ], [ %init, %loop.ph ]
  %iv.next = add i32 %iv, 1
  %exitcond = icmp eq i32 %iv.next, 10
  br i1 %exitcond, label %exit, label %loop

exit:
  ret void
}

define void @guard_pessimizes_analysis_step2(i1 %c, i32 %N) {
; CHECK-LABEL: 'guard_pessimizes_analysis_step2'
; CHECK-NEXT:  Classifying expressions for: @guard_pessimizes_analysis_step2
; CHECK-NEXT:    %init = phi i32 [ 2, %entry ], [ 3, %bb1 ]
; CHECK-NEXT:    --> %init U: [2,4) S: [2,4)
; CHECK-NEXT:    %iv = phi i32 [ %iv.next, %loop ], [ %init, %loop.ph ]
; CHECK-NEXT:    --> {%init,+,2}<nuw><nsw><%loop> U: [2,10) S: [2,10) Exits: ((2 * ((8 + (-1 * %init)<nsw>)<nsw> /u 2))<nuw><nsw> + %init) LoopDispositions: { %loop: Computable }
; CHECK-NEXT:    %iv.next = add nuw nsw i32 %iv, 2
; CHECK-NEXT:    --> {(2 + %init)<nuw><nsw>,+,2}<nuw><nsw><%loop> U: [4,12) S: [4,12) Exits: (2 + (2 * ((8 + (-1 * %init)<nsw>)<nsw> /u 2))<nuw><nsw> + %init) LoopDispositions: { %loop: Computable }
; CHECK-NEXT:  Determining loop execution counts for: @guard_pessimizes_analysis_step2
; CHECK-NEXT:  Loop %loop: backedge-taken count is ((8 + (-1 * %init)<nsw>)<nsw> /u 2)
; CHECK-NEXT:  Loop %loop: max backedge-taken count is 3
; CHECK-NEXT:  Loop %loop: Predicated backedge-taken count is ((8 + (-1 * %init)<nsw>)<nsw> /u 2)
; CHECK-NEXT:   Predicates:
; CHECK:       Loop %loop: Trip multiple is 1
;
entry:
  br i1 %c, label %bb1, label %guard

bb1:
  br label %guard

guard:
  %init = phi i32 [ 2, %entry ], [ 3, %bb1 ]
  %c.1 = icmp ult i32 %init, %N
  br i1 %c.1, label %loop.ph, label %exit

loop.ph:
  br label %loop

loop:
  %iv = phi i32 [ %iv.next, %loop ], [ %init, %loop.ph ]
  %iv.next = add nuw nsw i32 %iv, 2
  %exitcond = icmp eq i32 %iv.next, 10
  br i1 %exitcond, label %exit, label %loop

exit:
  ret void
}
define void @crash(i8* %ptr) {
; CHECK-LABEL: 'crash'
; CHECK-NEXT:  Classifying expressions for: @crash
; CHECK-NEXT:    %text.addr.5 = phi i8* [ %incdec.ptr112, %while.cond111 ], [ null, %while.body ]
; CHECK-NEXT:    --> {null,+,-1}<nw><%while.cond111> U: full-set S: full-set Exits: <<Unknown>> LoopDispositions: { %while.cond111: Computable, %while.body: Variant }
; CHECK-NEXT:    %incdec.ptr112 = getelementptr inbounds i8, i8* %text.addr.5, i64 -1
; CHECK-NEXT:    --> {(-1 + null)<nuw><nsw>,+,-1}<nw><%while.cond111> U: full-set S: full-set Exits: <<Unknown>> LoopDispositions: { %while.cond111: Computable, %while.body: Variant }
; CHECK-NEXT:    %lastout.2271 = phi i8* [ %incdec.ptr126, %while.body125 ], [ %ptr, %while.end117 ]
; CHECK-NEXT:    --> {%ptr,+,1}<nuw><%while.body125> U: full-set S: full-set Exits: {(-2 + (-1 * (ptrtoint i8* %ptr to i64)) + %ptr),+,-1}<nw><%while.cond111> LoopDispositions: { %while.body125: Computable }
; CHECK-NEXT:    %incdec.ptr126 = getelementptr inbounds i8, i8* %lastout.2271, i64 1
; CHECK-NEXT:    --> {(1 + %ptr),+,1}<nuw><%while.body125> U: full-set S: full-set Exits: {(-1 + (-1 * (ptrtoint i8* %ptr to i64)) + %ptr),+,-1}<nw><%while.cond111> LoopDispositions: { %while.body125: Computable }
; CHECK-NEXT:  Determining loop execution counts for: @crash
; CHECK-NEXT:  Loop %while.body125: backedge-taken count is {(-2 + (-1 * (ptrtoint i8* %ptr to i64))),+,-1}<nw><%while.cond111>
; CHECK-NEXT:  Loop %while.body125: max backedge-taken count is -2
; CHECK-NEXT:  Loop %while.body125: Predicated backedge-taken count is {(-2 + (-1 * (ptrtoint i8* %ptr to i64))),+,-1}<nw><%while.cond111>
; CHECK-NEXT:   Predicates:
; CHECK:       Loop %while.body125: Trip multiple is 1
; CHECK-NEXT:  Loop %while.cond111: Unpredictable backedge-taken count.
; CHECK-NEXT:  Loop %while.cond111: Unpredictable max backedge-taken count.
; CHECK-NEXT:  Loop %while.cond111: Unpredictable predicated backedge-taken count.
; CHECK-NEXT:  Loop %while.body: Unpredictable backedge-taken count.
; CHECK-NEXT:  Loop %while.body: Unpredictable max backedge-taken count.
; CHECK-NEXT:  Loop %while.body: Unpredictable predicated backedge-taken count.
;
entry:
  br label %while.body

while.body:
  br label %while.cond111

while.cond111:
  %text.addr.5 = phi i8* [ %incdec.ptr112, %while.cond111 ], [ null, %while.body ]
  %incdec.ptr112 = getelementptr inbounds i8, i8* %text.addr.5, i64 -1
  br i1 false, label %while.end117, label %while.cond111

while.end117:
  %cmp118 = icmp ult i8* %ptr, %incdec.ptr112
  br i1 %cmp118, label %while.body125, label %while.cond134.preheader


while.cond134.preheader:
  br label %while.body

while.body125:
  %lastout.2271 = phi i8* [ %incdec.ptr126, %while.body125 ], [ %ptr, %while.end117 ]
  %incdec.ptr126 = getelementptr inbounds i8, i8* %lastout.2271, i64 1
  %exitcond.not = icmp eq i8* %incdec.ptr126, %incdec.ptr112
  br i1 %exitcond.not, label %while.end129, label %while.body125

while.end129:                                     ; preds = %while.body125
  ret void
}

define void @test_guard_uge(i32 %blockSize) {
; CHECK-LABEL: 'test_guard_uge'
; CHECK-NEXT:  Classifying expressions for: @test_guard_uge
; CHECK-NEXT:    %shr = lshr i32 %blockSize, 2
; CHECK-NEXT:    --> (%blockSize /u 4) U: [0,1073741824) S: [0,1073741824)
; CHECK-NEXT:    %iv = phi i32 [ %dec, %while.body ], [ %shr, %while.body.preheader ]
; CHECK-NEXT:    --> {(%blockSize /u 4),+,-1}<%while.body> U: [-1073741822,1073741824) S: [-1073741822,1073741824) Exits: 1 LoopDispositions: { %while.body: Computable }
; CHECK-NEXT:    %dec = add i32 %iv, -1
; CHECK-NEXT:    --> {(-1 + (%blockSize /u 4))<nsw>,+,-1}<%while.body> U: [-1073741823,1073741823) S: [-1073741823,1073741823) Exits: 0 LoopDispositions: { %while.body: Computable }
; CHECK-NEXT:  Determining loop execution counts for: @test_guard_uge
; CHECK-NEXT:  Loop %while.body: backedge-taken count is (-1 + (%blockSize /u 4))<nsw>
; CHECK-NEXT:  Loop %while.body: max backedge-taken count is 1073741822
; CHECK-NEXT:  Loop %while.body: Predicated backedge-taken count is (-1 + (%blockSize /u 4))<nsw>
; CHECK-NEXT:   Predicates:
; CHECK:       Loop %while.body: Trip multiple is 1
;
  %shr = lshr i32 %blockSize, 2
  %guard = icmp uge i32 %blockSize, 4
  br i1 %guard, label %while.body.preheader, label %while.end

while.body.preheader:
  br label %while.body

while.body:
  %iv = phi i32 [ %dec, %while.body ], [ %shr, %while.body.preheader ]
  %dec = add i32 %iv, -1
  %cmp.not = icmp eq i32 %dec, 0
  br i1 %cmp.not, label %while.end.loopexit, label %while.body

while.end.loopexit:
  br label %while.end

while.end:
  ret void
}

define void @test_guard_ugt(i32 %blockSize) {
; CHECK-LABEL: 'test_guard_ugt'
; CHECK-NEXT:  Classifying expressions for: @test_guard_ugt
; CHECK-NEXT:    %shr = lshr i32 %blockSize, 2
; CHECK-NEXT:    --> (%blockSize /u 4) U: [0,1073741824) S: [0,1073741824)
; CHECK-NEXT:    %iv = phi i32 [ %dec, %while.body ], [ %shr, %while.body.preheader ]
; CHECK-NEXT:    --> {(%blockSize /u 4),+,-1}<%while.body> U: [-1073741822,1073741824) S: [-1073741822,1073741824) Exits: 1 LoopDispositions: { %while.body: Computable }
; CHECK-NEXT:    %dec = add i32 %iv, -1
; CHECK-NEXT:    --> {(-1 + (%blockSize /u 4))<nsw>,+,-1}<%while.body> U: [-1073741823,1073741823) S: [-1073741823,1073741823) Exits: 0 LoopDispositions: { %while.body: Computable }
; CHECK-NEXT:  Determining loop execution counts for: @test_guard_ugt
; CHECK-NEXT:  Loop %while.body: backedge-taken count is (-1 + (%blockSize /u 4))<nsw>
; CHECK-NEXT:  Loop %while.body: max backedge-taken count is 1073741822
; CHECK-NEXT:  Loop %while.body: Predicated backedge-taken count is (-1 + (%blockSize /u 4))<nsw>
; CHECK-NEXT:   Predicates:
; CHECK:       Loop %while.body: Trip multiple is 1
;
  %shr = lshr i32 %blockSize, 2
  %guard = icmp ugt i32 %blockSize, 3
  br i1 %guard, label %while.body.preheader, label %while.end

while.body.preheader:
  br label %while.body

while.body:
  %iv = phi i32 [ %dec, %while.body ], [ %shr, %while.body.preheader ]
  %dec = add i32 %iv, -1
  %cmp.not = icmp eq i32 %dec, 0
  br i1 %cmp.not, label %while.end.loopexit, label %while.body

while.end.loopexit:
  br label %while.end

while.end:
  ret void
}

define void @test_guard_uge_and_ule(i32 %blockSize) {
; CHECK-LABEL: 'test_guard_uge_and_ule'
; CHECK-NEXT:  Classifying expressions for: @test_guard_uge_and_ule
; CHECK-NEXT:    %shr = lshr i32 %blockSize, 2
; CHECK-NEXT:    --> (%blockSize /u 4) U: [0,1073741824) S: [0,1073741824)
; CHECK-NEXT:    %iv = phi i32 [ %dec, %while.body ], [ %shr, %while.body.preheader ]
; CHECK-NEXT:    --> {(%blockSize /u 4),+,-1}<%while.body> U: [-255,1073741824) S: [-255,1073741824) Exits: 1 LoopDispositions: { %while.body: Computable }
; CHECK-NEXT:    %dec = add i32 %iv, -1
; CHECK-NEXT:    --> {(-1 + (%blockSize /u 4))<nsw>,+,-1}<%while.body> U: [-256,1073741823) S: [-256,1073741823) Exits: 0 LoopDispositions: { %while.body: Computable }
; CHECK-NEXT:  Determining loop execution counts for: @test_guard_uge_and_ule
; CHECK-NEXT:  Loop %while.body: backedge-taken count is (-1 + (%blockSize /u 4))<nsw>
; CHECK-NEXT:  Loop %while.body: max backedge-taken count is 255
; CHECK-NEXT:  Loop %while.body: Predicated backedge-taken count is (-1 + (%blockSize /u 4))<nsw>
; CHECK-NEXT:   Predicates:
; CHECK:       Loop %while.body: Trip multiple is 1
;
  %shr = lshr i32 %blockSize, 2
  %guard1 = icmp uge i32 %blockSize, 4
  br i1 %guard1, label %while.guard, label %while.end

while.guard:
  %guard2 = icmp ule i32 %blockSize, 1024
  br i1 %guard2, label %while.body.preheader, label %while.end

while.body.preheader:
  br label %while.body

while.body:
  %iv = phi i32 [ %dec, %while.body ], [ %shr, %while.body.preheader ]
  %dec = add i32 %iv, -1
  %cmp.not = icmp eq i32 %dec, 0
  br i1 %cmp.not, label %while.end.loopexit, label %while.body

while.end.loopexit:
  br label %while.end

while.end:
  ret void
}

define void @test_guard_ugt_and_ult(i32 %blockSize) {
; CHECK-LABEL: 'test_guard_ugt_and_ult'
; CHECK-NEXT:  Classifying expressions for: @test_guard_ugt_and_ult
; CHECK-NEXT:    %shr = lshr i32 %blockSize, 2
; CHECK-NEXT:    --> (%blockSize /u 4) U: [0,1073741824) S: [0,1073741824)
; CHECK-NEXT:    %iv = phi i32 [ %dec, %while.body ], [ %shr, %while.body.preheader ]
; CHECK-NEXT:    --> {(%blockSize /u 4),+,-1}<%while.body> U: [-255,1073741824) S: [-255,1073741824) Exits: 1 LoopDispositions: { %while.body: Computable }
; CHECK-NEXT:    %dec = add i32 %iv, -1
; CHECK-NEXT:    --> {(-1 + (%blockSize /u 4))<nsw>,+,-1}<%while.body> U: [-256,1073741823) S: [-256,1073741823) Exits: 0 LoopDispositions: { %while.body: Computable }
; CHECK-NEXT:  Determining loop execution counts for: @test_guard_ugt_and_ult
; CHECK-NEXT:  Loop %while.body: backedge-taken count is (-1 + (%blockSize /u 4))<nsw>
; CHECK-NEXT:  Loop %while.body: max backedge-taken count is 255
; CHECK-NEXT:  Loop %while.body: Predicated backedge-taken count is (-1 + (%blockSize /u 4))<nsw>
; CHECK-NEXT:   Predicates:
; CHECK:       Loop %while.body: Trip multiple is 1
;
  %shr = lshr i32 %blockSize, 2
  %guard1 = icmp ugt i32 %blockSize, 3
  br i1 %guard1, label %while.guard, label %while.end

while.guard:
  %guard2 = icmp ult i32 %blockSize, 1025
  br i1 %guard2, label %while.body.preheader, label %while.end

while.body.preheader:
  br label %while.body

while.body:
  %iv = phi i32 [ %dec, %while.body ], [ %shr, %while.body.preheader ]
  %dec = add i32 %iv, -1
  %cmp.not = icmp eq i32 %dec, 0
  br i1 %cmp.not, label %while.end.loopexit, label %while.body

while.end.loopexit:
  br label %while.end

while.end:
  ret void
}

define void @test_guard_slt_sgt_1(i32* nocapture %a, i64 %N) {
; CHECK-LABEL: 'test_guard_slt_sgt_1'
; CHECK-NEXT:  Classifying expressions for: @test_guard_slt_sgt_1
; CHECK-NEXT:    %and = and i1 %c.0, %c.1
; CHECK-NEXT:    --> %and U: full-set S: full-set
; CHECK-NEXT:    %iv = phi i64 [ 0, %entry ], [ %iv.next, %loop ]
; CHECK-NEXT:    --> {0,+,1}<nuw><nsw><%loop> U: [0,11) S: [0,11) Exits: (-1 + %N) LoopDispositions: { %loop: Computable }
; CHECK-NEXT:    %idx = getelementptr inbounds i32, i32* %a, i64 %iv
; CHECK-NEXT:    --> {%a,+,4}<nuw><%loop> U: full-set S: full-set Exits: (-4 + (4 * %N) + %a) LoopDispositions: { %loop: Computable }
; CHECK-NEXT:    %iv.next = add nuw nsw i64 %iv, 1
; CHECK-NEXT:    --> {1,+,1}<nuw><nsw><%loop> U: [1,12) S: [1,12) Exits: %N LoopDispositions: { %loop: Computable }
; CHECK-NEXT:  Determining loop execution counts for: @test_guard_slt_sgt_1
; CHECK-NEXT:  Loop %loop: backedge-taken count is (-1 + %N)
; CHECK-NEXT:  Loop %loop: max backedge-taken count is 10
; CHECK-NEXT:  Loop %loop: Predicated backedge-taken count is (-1 + %N)
; CHECK-NEXT:   Predicates:
; CHECK:       Loop %loop: Trip multiple is 1
;
entry:
  %c.0 = icmp slt i64 %N, 12
  %c.1 = icmp sgt i64 %N, 0
  %and = and i1 %c.0, %c.1
  br i1 %and, label %loop, label %exit

loop:
  %iv = phi i64 [ 0, %entry ], [ %iv.next, %loop ]
  %idx = getelementptr inbounds i32, i32* %a, i64 %iv
  store i32 1, i32* %idx, align 4
  %iv.next = add nuw nsw i64 %iv, 1
  %exitcond = icmp eq i64 %iv.next, %N
  br i1 %exitcond, label %exit, label %loop

exit:
  ret void
}

define void @test_guard_slt_sgt_2(i32* nocapture %a, i64 %i) {
; CHECK-LABEL: 'test_guard_slt_sgt_2'
; CHECK-NEXT:  Classifying expressions for: @test_guard_slt_sgt_2
; CHECK-NEXT:    %and = and i1 %c.0, %c.1
; CHECK-NEXT:    --> %and U: full-set S: full-set
; CHECK-NEXT:    %iv = phi i64 [ %iv.next, %loop ], [ %i, %entry ]
; CHECK-NEXT:    --> {%i,+,1}<nuw><nsw><%loop> U: full-set S: full-set Exits: 17 LoopDispositions: { %loop: Computable }
; CHECK-NEXT:    %idx = getelementptr inbounds i32, i32* %a, i64 %iv
; CHECK-NEXT:    --> {((4 * %i) + %a),+,4}<nw><%loop> U: full-set S: full-set Exits: (68 + %a) LoopDispositions: { %loop: Computable }
; CHECK-NEXT:    %iv.next = add nuw nsw i64 %iv, 1
; CHECK-NEXT:    --> {(1 + %i),+,1}<nuw><nsw><%loop> U: full-set S: full-set Exits: 18 LoopDispositions: { %loop: Computable }
; CHECK-NEXT:  Determining loop execution counts for: @test_guard_slt_sgt_2
; CHECK-NEXT:  Loop %loop: backedge-taken count is (17 + (-1 * %i))
; CHECK-NEXT:  Loop %loop: max backedge-taken count is 12
; CHECK-NEXT:  Loop %loop: Predicated backedge-taken count is (17 + (-1 * %i))
; CHECK-NEXT:   Predicates:
; CHECK:       Loop %loop: Trip multiple is 1
;
entry:
  %c.0 = icmp slt i64 %i, 16
  %c.1 = icmp sgt i64 %i, 4
  %and = and i1 %c.0, %c.1
  br i1 %and, label %loop, label %exit

loop:
  %iv = phi i64 [ %iv.next, %loop ], [ %i, %entry ]
  %idx = getelementptr inbounds i32, i32* %a, i64 %iv
  store i32 1, i32* %idx, align 4
  %iv.next = add nuw nsw i64 %iv, 1
  %exitcond = icmp eq i64 %iv.next, 18
  br i1 %exitcond, label %exit, label %loop

exit:
  ret void
}

define void @test_guard_sle_sge_1(i32* nocapture %a, i64 %N) {
; CHECK-LABEL: 'test_guard_sle_sge_1'
; CHECK-NEXT:  Classifying expressions for: @test_guard_sle_sge_1
; CHECK-NEXT:    %and = and i1 %c.0, %c.1
; CHECK-NEXT:    --> %and U: full-set S: full-set
; CHECK-NEXT:    %iv = phi i64 [ 0, %entry ], [ %iv.next, %loop ]
; CHECK-NEXT:    --> {0,+,1}<nuw><nsw><%loop> U: [0,12) S: [0,12) Exits: (-1 + %N) LoopDispositions: { %loop: Computable }
; CHECK-NEXT:    %idx = getelementptr inbounds i32, i32* %a, i64 %iv
; CHECK-NEXT:    --> {%a,+,4}<nuw><%loop> U: full-set S: full-set Exits: (-4 + (4 * %N) + %a) LoopDispositions: { %loop: Computable }
; CHECK-NEXT:    %iv.next = add nuw nsw i64 %iv, 1
; CHECK-NEXT:    --> {1,+,1}<nuw><nsw><%loop> U: [1,13) S: [1,13) Exits: %N LoopDispositions: { %loop: Computable }
; CHECK-NEXT:  Determining loop execution counts for: @test_guard_sle_sge_1
; CHECK-NEXT:  Loop %loop: backedge-taken count is (-1 + %N)
; CHECK-NEXT:  Loop %loop: max backedge-taken count is 11
; CHECK-NEXT:  Loop %loop: Predicated backedge-taken count is (-1 + %N)
; CHECK-NEXT:   Predicates:
; CHECK:       Loop %loop: Trip multiple is 1
;
entry:
  %c.0 = icmp sle i64 %N, 12
  %c.1 = icmp sge i64 %N, 1
  %and = and i1 %c.0, %c.1
  br i1 %and, label %loop, label %exit

loop:
  %iv = phi i64 [ 0, %entry ], [ %iv.next, %loop ]
  %idx = getelementptr inbounds i32, i32* %a, i64 %iv
  store i32 1, i32* %idx, align 4
  %iv.next = add nuw nsw i64 %iv, 1
  %exitcond = icmp eq i64 %iv.next, %N
  br i1 %exitcond, label %exit, label %loop

exit:
  ret void
}

define void @test_guard_sle_sge_2(i32* nocapture %a, i64 %i) {
; CHECK-LABEL: 'test_guard_sle_sge_2'
; CHECK-NEXT:  Classifying expressions for: @test_guard_sle_sge_2
; CHECK-NEXT:    %and = and i1 %c.0, %c.1
; CHECK-NEXT:    --> %and U: full-set S: full-set
; CHECK-NEXT:    %iv = phi i64 [ %iv.next, %loop ], [ %i, %entry ]
; CHECK-NEXT:    --> {%i,+,1}<nuw><nsw><%loop> U: full-set S: full-set Exits: 17 LoopDispositions: { %loop: Computable }
; CHECK-NEXT:    %idx = getelementptr inbounds i32, i32* %a, i64 %iv
; CHECK-NEXT:    --> {((4 * %i) + %a),+,4}<nw><%loop> U: full-set S: full-set Exits: (68 + %a) LoopDispositions: { %loop: Computable }
; CHECK-NEXT:    %iv.next = add nuw nsw i64 %iv, 1
; CHECK-NEXT:    --> {(1 + %i),+,1}<nuw><nsw><%loop> U: full-set S: full-set Exits: 18 LoopDispositions: { %loop: Computable }
; CHECK-NEXT:  Determining loop execution counts for: @test_guard_sle_sge_2
; CHECK-NEXT:  Loop %loop: backedge-taken count is (17 + (-1 * %i))
; CHECK-NEXT:  Loop %loop: max backedge-taken count is 13
; CHECK-NEXT:  Loop %loop: Predicated backedge-taken count is (17 + (-1 * %i))
; CHECK-NEXT:   Predicates:
; CHECK:       Loop %loop: Trip multiple is 1
;
entry:
  %c.0 = icmp sle i64 %i, 16
  %c.1 = icmp sge i64 %i, 4
  %and = and i1 %c.0, %c.1
  br i1 %and, label %loop, label %exit

loop:
  %iv = phi i64 [ %iv.next, %loop ], [ %i, %entry ]
  %idx = getelementptr inbounds i32, i32* %a, i64 %iv
  store i32 1, i32* %idx, align 4
  %iv.next = add nuw nsw i64 %iv, 1
  %exitcond = icmp eq i64 %iv.next, 18
  br i1 %exitcond, label %exit, label %loop

exit:
  ret void
}

; The function below uses a single condition to ensure %N > 0 && %N < 8.
; InstCombine transforms such checks with 2 conditions to a single check as in
; the test function.
define void @optimized_range_check_unsigned(i16* %pred, i32 %N) {
; CHECK-LABEL: 'optimized_range_check_unsigned'
; CHECK-NEXT:  Classifying expressions for: @optimized_range_check_unsigned
; CHECK-NEXT:    %N.off = add i32 %N, -1
; CHECK-NEXT:    --> (-1 + %N) U: full-set S: full-set
; CHECK-NEXT:    %iv = phi i32 [ 0, %entry ], [ %iv.next, %loop ]
; CHECK-NEXT:    --> {0,+,1}<nuw><nsw><%loop> U: [0,7) S: [0,7) Exits: (-1 + %N) LoopDispositions: { %loop: Computable }
; CHECK-NEXT:    %gep = getelementptr inbounds i16, i16* %pred, i32 %iv
; CHECK-NEXT:    --> {%pred,+,2}<nuw><%loop> U: full-set S: full-set Exits: ((2 * (zext i32 (-1 + %N) to i64))<nuw><nsw> + %pred) LoopDispositions: { %loop: Computable }
; CHECK-NEXT:    %iv.next = add nuw nsw i32 %iv, 1
; CHECK-NEXT:    --> {1,+,1}<nuw><nsw><%loop> U: [1,8) S: [1,8) Exits: %N LoopDispositions: { %loop: Computable }
; CHECK-NEXT:  Determining loop execution counts for: @optimized_range_check_unsigned
; CHECK-NEXT:  Loop %loop: backedge-taken count is (-1 + %N)
; CHECK-NEXT:  Loop %loop: max backedge-taken count is 6
; CHECK-NEXT:  Loop %loop: Predicated backedge-taken count is (-1 + %N)
; CHECK-NEXT:   Predicates:
; CHECK:       Loop %loop: Trip multiple is 1
;
entry:
  %N.off = add i32 %N, -1
  %cmp = icmp ult i32 %N.off, 7
  br i1 %cmp, label %loop, label %exit

loop:
  %iv = phi i32 [ 0, %entry ], [ %iv.next, %loop ]
  %gep = getelementptr inbounds i16, i16* %pred, i32 %iv
  store i16 0, i16* %gep, align 2
  %iv.next = add nuw nsw i32 %iv, 1
  %ec = icmp eq i32 %iv.next, %N
  br i1 %ec, label %exit, label %loop

exit:
  ret void
}

; Same as @optimized_range_check_unsigned, but with the icmp operands swapped.
define void @optimized_range_check_unsigned_icmp_ops_swapped(i16* %pred, i32 %N) {
; CHECK-LABEL: 'optimized_range_check_unsigned_icmp_ops_swapped'
; CHECK-NEXT:  Classifying expressions for: @optimized_range_check_unsigned_icmp_ops_swapped
; CHECK-NEXT:    %N.off = add i32 %N, -1
; CHECK-NEXT:    --> (-1 + %N) U: full-set S: full-set
; CHECK-NEXT:    %iv = phi i32 [ 0, %entry ], [ %iv.next, %loop ]
; CHECK-NEXT:    --> {0,+,1}<nuw><nsw><%loop> U: [0,7) S: [0,7) Exits: (-1 + %N) LoopDispositions: { %loop: Computable }
; CHECK-NEXT:    %gep = getelementptr inbounds i16, i16* %pred, i32 %iv
; CHECK-NEXT:    --> {%pred,+,2}<nuw><%loop> U: full-set S: full-set Exits: ((2 * (zext i32 (-1 + %N) to i64))<nuw><nsw> + %pred) LoopDispositions: { %loop: Computable }
; CHECK-NEXT:    %iv.next = add nuw nsw i32 %iv, 1
; CHECK-NEXT:    --> {1,+,1}<nuw><nsw><%loop> U: [1,8) S: [1,8) Exits: %N LoopDispositions: { %loop: Computable }
; CHECK-NEXT:  Determining loop execution counts for: @optimized_range_check_unsigned_icmp_ops_swapped
; CHECK-NEXT:  Loop %loop: backedge-taken count is (-1 + %N)
; CHECK-NEXT:  Loop %loop: max backedge-taken count is 6
; CHECK-NEXT:  Loop %loop: Predicated backedge-taken count is (-1 + %N)
; CHECK-NEXT:   Predicates:
; CHECK:       Loop %loop: Trip multiple is 1
;
entry:
  %N.off = add i32 %N, -1
  %cmp = icmp ugt i32 7, %N.off
  br i1 %cmp, label %loop, label %exit

loop:
  %iv = phi i32 [ 0, %entry ], [ %iv.next, %loop ]
  %gep = getelementptr inbounds i16, i16* %pred, i32 %iv
  store i16 0, i16* %gep, align 2
  %iv.next = add nuw nsw i32 %iv, 1
  %ec = icmp eq i32 %iv.next, %N
  br i1 %ec, label %exit, label %loop

exit:
  ret void
}

; The function below uses a single condition to ensure %N > 2 && %N < 22.
; InstCombine transforms such checks with 2 conditions to a single check as in
; the test function.
define void @optimized_range_check_unsigned2(i16* %pred, i32 %N) {
; CHECK-LABEL: 'optimized_range_check_unsigned2'
; CHECK-NEXT:  Classifying expressions for: @optimized_range_check_unsigned2
; CHECK-NEXT:    %N.off = add i32 %N, -2
; CHECK-NEXT:    --> (-2 + %N) U: full-set S: full-set
; CHECK-NEXT:    %iv = phi i32 [ 0, %entry ], [ %iv.next, %loop ]
; CHECK-NEXT:    --> {0,+,1}<nuw><nsw><%loop> U: [0,21) S: [0,21) Exits: (-1 + %N) LoopDispositions: { %loop: Computable }
; CHECK-NEXT:    %gep = getelementptr inbounds i16, i16* %pred, i32 %iv
; CHECK-NEXT:    --> {%pred,+,2}<nuw><%loop> U: full-set S: full-set Exits: ((2 * (zext i32 (-1 + %N) to i64))<nuw><nsw> + %pred) LoopDispositions: { %loop: Computable }
; CHECK-NEXT:    %iv.next = add nuw nsw i32 %iv, 1
; CHECK-NEXT:    --> {1,+,1}<nuw><nsw><%loop> U: [1,22) S: [1,22) Exits: %N LoopDispositions: { %loop: Computable }
; CHECK-NEXT:  Determining loop execution counts for: @optimized_range_check_unsigned2
; CHECK-NEXT:  Loop %loop: backedge-taken count is (-1 + %N)
; CHECK-NEXT:  Loop %loop: max backedge-taken count is 20
; CHECK-NEXT:  Loop %loop: Predicated backedge-taken count is (-1 + %N)
; CHECK-NEXT:   Predicates:
; CHECK:       Loop %loop: Trip multiple is 1
;
entry:
  %N.off = add i32 %N, -2
  %cmp = icmp ult i32 %N.off, 20
  br i1 %cmp, label %loop, label %exit

loop:
  %iv = phi i32 [ 0, %entry ], [ %iv.next, %loop ]
  %gep = getelementptr inbounds i16, i16* %pred, i32 %iv
  store i16 0, i16* %gep, align 2
  %iv.next = add nuw nsw i32 %iv, 1
  %ec = icmp eq i32 %iv.next, %N
  br i1 %ec, label %exit, label %loop

exit:
  ret void
}

; Same as @optimized_range_check_unsigned, but %N already has a range limited
; to [2,4) beforehand.
define void @optimized_range_check_unsigned3(i16* %pred, i1 %c) {
; CHECK-LABEL: 'optimized_range_check_unsigned3'
; CHECK-NEXT:  Classifying expressions for: @optimized_range_check_unsigned3
; CHECK-NEXT:    %N = select i1 %c, i32 2, i32 3
; CHECK-NEXT:    --> %N U: [2,4) S: [2,4)
; CHECK-NEXT:    %N.off = add i32 %N, -1
; CHECK-NEXT:    --> (-1 + %N)<nsw> U: [1,3) S: [1,3)
; CHECK-NEXT:    %iv = phi i32 [ 0, %entry ], [ %iv.next, %loop ]
; CHECK-NEXT:    --> {0,+,1}<nuw><nsw><%loop> U: [0,3) S: [0,3) Exits: (-1 + %N)<nsw> LoopDispositions: { %loop: Computable }
; CHECK-NEXT:    %gep = getelementptr inbounds i16, i16* %pred, i32 %iv
; CHECK-NEXT:    --> {%pred,+,2}<nuw><%loop> U: full-set S: full-set Exits: ((2 * (zext i32 (-1 + %N)<nsw> to i64))<nuw><nsw> + %pred) LoopDispositions: { %loop: Computable }
; CHECK-NEXT:    %iv.next = add nuw nsw i32 %iv, 1
; CHECK-NEXT:    --> {1,+,1}<nuw><nsw><%loop> U: [1,4) S: [1,4) Exits: %N LoopDispositions: { %loop: Computable }
; CHECK-NEXT:  Determining loop execution counts for: @optimized_range_check_unsigned3
; CHECK-NEXT:  Loop %loop: backedge-taken count is (-1 + %N)<nsw>
; CHECK-NEXT:  Loop %loop: max backedge-taken count is 2
; CHECK-NEXT:  Loop %loop: Predicated backedge-taken count is (-1 + %N)<nsw>
; CHECK-NEXT:   Predicates:
; CHECK:       Loop %loop: Trip multiple is 1
;
entry:
  %N = select i1 %c, i32 2, i32 3
  %N.off = add i32 %N, -1
  %cmp = icmp ult i32 %N.off, 7
  br i1 %cmp, label %loop, label %exit

loop:
  %iv = phi i32 [ 0, %entry ], [ %iv.next, %loop ]
  %gep = getelementptr inbounds i16, i16* %pred, i32 %iv
  store i16 0, i16* %gep, align 2
  %iv.next = add nuw nsw i32 %iv, 1
  %ec = icmp eq i32 %iv.next, %N
  br i1 %ec, label %exit, label %loop

exit:
  ret void
}

; Similar to @optimized_range_check_unsigned, but the initial compare checks
; against unsigned max (-1), which breaks the range check idiom.
define void @not_optimized_range_check_unsigned1(i16* %pred, i32 %N) {
; CHECK-LABEL: 'not_optimized_range_check_unsigned1'
; CHECK-NEXT:  Classifying expressions for: @not_optimized_range_check_unsigned1
; CHECK-NEXT:    %N.off = add i32 %N, -1
; CHECK-NEXT:    --> (-1 + %N) U: full-set S: full-set
; CHECK-NEXT:    %iv = phi i32 [ 0, %entry ], [ %iv.next, %loop ]
; CHECK-NEXT:    --> {0,+,1}<nuw><nsw><%loop> U: [0,-2147483648) S: [0,-2147483648) Exits: (-1 + %N) LoopDispositions: { %loop: Computable }
; CHECK-NEXT:    %gep = getelementptr inbounds i16, i16* %pred, i32 %iv
; CHECK-NEXT:    --> {%pred,+,2}<nuw><%loop> U: full-set S: full-set Exits: ((2 * (zext i32 (-1 + %N) to i64))<nuw><nsw> + %pred) LoopDispositions: { %loop: Computable }
; CHECK-NEXT:    %iv.next = add nuw nsw i32 %iv, 1
; CHECK-NEXT:    --> {1,+,1}<nuw><nsw><%loop> U: [1,-2147483648) S: [1,-2147483648) Exits: %N LoopDispositions: { %loop: Computable }
; CHECK-NEXT:  Determining loop execution counts for: @not_optimized_range_check_unsigned1
; CHECK-NEXT:  Loop %loop: backedge-taken count is (-1 + %N)
; CHECK-NEXT:  Loop %loop: max backedge-taken count is -2
; CHECK-NEXT:  Loop %loop: Predicated backedge-taken count is (-1 + %N)
; CHECK-NEXT:   Predicates:
; CHECK:       Loop %loop: Trip multiple is 1
;
entry:
  %N.off = add i32 %N, -1
  %cmp = icmp ult i32 %N.off, -1
  br i1 %cmp, label %loop, label %exit

loop:
  %iv = phi i32 [ 0, %entry ], [ %iv.next, %loop ]
  %gep = getelementptr inbounds i16, i16* %pred, i32 %iv
  store i16 0, i16* %gep, align 2
  %iv.next = add nuw nsw i32 %iv, 1
  %ec = icmp eq i32 %iv.next, %N
  br i1 %ec, label %exit, label %loop

exit:
  ret void
}

; Similar to @optimized_range_check_unsigned, but the initial compare checks
; against 0, which breaks the range check idiom.
define void @not_optimized_range_check_unsigned2(i16* %pred, i32 %N) {
; CHECK-LABEL: 'not_optimized_range_check_unsigned2'
; CHECK-NEXT:  Classifying expressions for: @not_optimized_range_check_unsigned2
; CHECK-NEXT:    %N.off = add i32 %N, -1
; CHECK-NEXT:    --> (-1 + %N) U: full-set S: full-set
; CHECK-NEXT:    %iv = phi i32 [ 0, %entry ], [ %iv.next, %loop ]
; CHECK-NEXT:    --> {0,+,1}<nuw><nsw><%loop> U: [0,-2147483648) S: [0,-2147483648) Exits: (-1 + %N) LoopDispositions: { %loop: Computable }
; CHECK-NEXT:    %gep = getelementptr inbounds i16, i16* %pred, i32 %iv
; CHECK-NEXT:    --> {%pred,+,2}<nuw><%loop> U: full-set S: full-set Exits: ((2 * (zext i32 (-1 + %N) to i64))<nuw><nsw> + %pred) LoopDispositions: { %loop: Computable }
; CHECK-NEXT:    %iv.next = add nuw nsw i32 %iv, 1
; CHECK-NEXT:    --> {1,+,1}<nuw><nsw><%loop> U: [1,-2147483648) S: [1,-2147483648) Exits: %N LoopDispositions: { %loop: Computable }
; CHECK-NEXT:  Determining loop execution counts for: @not_optimized_range_check_unsigned2
; CHECK-NEXT:  Loop %loop: backedge-taken count is (-1 + %N)
; CHECK-NEXT:  Loop %loop: max backedge-taken count is -2
; CHECK-NEXT:  Loop %loop: Predicated backedge-taken count is (-1 + %N)
; CHECK-NEXT:   Predicates:
; CHECK:       Loop %loop: Trip multiple is 1
;
entry:
  %N.off = add i32 %N, -1
  %cmp = icmp ult i32 %N.off, 0
  br i1 %cmp, label %loop, label %exit

loop:
  %iv = phi i32 [ 0, %entry ], [ %iv.next, %loop ]
  %gep = getelementptr inbounds i16, i16* %pred, i32 %iv
  store i16 0, i16* %gep, align 2
  %iv.next = add nuw nsw i32 %iv, 1
  %ec = icmp eq i32 %iv.next, %N
  br i1 %ec, label %exit, label %loop

exit:
  ret void
}

define i32 @sle_sgt_ult_umax_to_smax(i32 %num) {
; CHECK-LABEL: 'sle_sgt_ult_umax_to_smax'
; CHECK-NEXT:  Classifying expressions for: @sle_sgt_ult_umax_to_smax
; CHECK-NEXT:    %iv = phi i32 [ 0, %guard.3 ], [ %iv.next, %loop ]
; CHECK-NEXT:    --> {0,+,4}<nuw><%loop> U: [0,25) S: [0,25) Exits: (4 * ((-4 + %num) /u 4))<nuw> LoopDispositions: { %loop: Computable }
; CHECK-NEXT:    %iv.next = add nuw i32 %iv, 4
; CHECK-NEXT:    --> {4,+,4}<nuw><%loop> U: [4,29) S: [4,29) Exits: (4 + (4 * ((-4 + %num) /u 4))<nuw>) LoopDispositions: { %loop: Computable }
; CHECK-NEXT:  Determining loop execution counts for: @sle_sgt_ult_umax_to_smax
; CHECK-NEXT:  Loop %loop: backedge-taken count is ((-4 + %num) /u 4)
; CHECK-NEXT:  Loop %loop: max backedge-taken count is 6
; CHECK-NEXT:  Loop %loop: Predicated backedge-taken count is ((-4 + %num) /u 4)
; CHECK-NEXT:   Predicates:
; CHECK:       Loop %loop: Trip multiple is 1
;
guard.1:
  %cmp.1 = icmp sle i32 %num, 0
  br i1 %cmp.1, label %exit, label %guard.2

guard.2:
  %cmp.2 = icmp sgt i32 %num, 28
  br i1 %cmp.2, label %exit, label %guard.3

guard.3:
  %cmp.3 = icmp ult i32 %num, 4
  br i1 %cmp.3, label %exit, label %loop

loop:
  %iv = phi i32 [ 0, %guard.3 ], [ %iv.next, %loop ]
  %iv.next = add nuw i32 %iv, 4
  %ec = icmp eq i32 %iv.next, %num
  br i1 %ec, label %exit, label %loop

exit:
  ret i32 0
}

; Similar to @sle_sgt_ult_umax_to_smax but with different predicate order.
define i32 @ult_sle_sgt_umax_to_smax(i32 %num) {
; CHECK-LABEL: 'ult_sle_sgt_umax_to_smax'
; CHECK-NEXT:  Classifying expressions for: @ult_sle_sgt_umax_to_smax
; CHECK-NEXT:    %iv = phi i32 [ 0, %guard.3 ], [ %iv.next, %loop ]
; CHECK-NEXT:    --> {0,+,4}<nuw><%loop> U: [0,-3) S: [-2147483648,2147483645) Exits: (4 * ((-4 + %num) /u 4))<nuw> LoopDispositions: { %loop: Computable }
; CHECK-NEXT:    %iv.next = add nuw i32 %iv, 4
; CHECK-NEXT:    --> {4,+,4}<nuw><%loop> U: [4,-3) S: [-2147483648,2147483645) Exits: (4 + (4 * ((-4 + %num) /u 4))<nuw>) LoopDispositions: { %loop: Computable }
; CHECK-NEXT:  Determining loop execution counts for: @ult_sle_sgt_umax_to_smax
; CHECK-NEXT:  Loop %loop: backedge-taken count is ((-4 + %num) /u 4)
; CHECK-NEXT:  Loop %loop: max backedge-taken count is 1073741823
; CHECK-NEXT:  Loop %loop: Predicated backedge-taken count is ((-4 + %num) /u 4)
; CHECK-NEXT:   Predicates:
; CHECK:       Loop %loop: Trip multiple is 1
;
guard.1:
  %cmp.1 = icmp ult i32 %num, 4
  br i1 %cmp.1, label %exit, label %guard.2

guard.2:
  %cmp.2 = icmp sgt i32 %num, 28
  br i1 %cmp.2, label %exit, label %guard.3

guard.3:
  %cmp.3 = icmp sle i32 %num, 0
  br i1 %cmp.3, label %exit, label %loop

loop:
  %iv = phi i32 [ 0, %guard.3 ], [ %iv.next, %loop ]
  %iv.next = add nuw i32 %iv, 4
  %ec = icmp eq i32 %iv.next, %num
  br i1 %ec, label %exit, label %loop

exit:
  ret i32 0
}